• Journal of Intelligence and Information Systems
• /
• v.14 no.4
• /
• pp.47-68
• /
• 2008

The aim of this research is to develop a new business model using mobile RFID in exhibition spaces such as museums and art galleries. Using mobile RFID, the exhibition space is expected to be evolved from a simple media space only for the exhibition to an extended space integrating media, commerce and entertainment. This paper proposes a u-Exhibition business model and its scenario in the u-Exhibition space. We discuss the real-world issues for the implementation and show the ways of investigating working conditions for the business model through revenue simulation and analyzing the expected value of tag installed on the exhibition space by so-called 'tag evaluation model.'

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.8021-8029
• /
• 2015

This study obtains design assessment indexes that should be considered in order to improvements of the public space was to analysis the importance in the public officials/academics and practitioners side. Obtained assessment topics in accordance with characteristic of public space through previous research to them and after a detailed selection indicators was so lead through the FGI. Derived surface was subjected to the significance analysis AHP through the survey expert. For this study, the importance of the public space are working professionals usability, publicness, environment, connectivity, identity, spatiality the order, public officials/academics usability, environment, connectivity, identity, spatiality, publicness the order. In addition, professionals working in the comprehensive analysis of the most important priority was to recognize safety, public officials/academics of the most important element appeared to have cleanliness. The results obtained in this study will be used as an index that can be used in planning and evaluation for consideration of the next improvement of public space.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.276-283
• /
• 2013

Coworking space is the ideal concept of small companies, freelancers, startups, and entrepreneurs operating out of a shared office space while working independently of one another. The coworkers share the core values of coworking: collaboration, openness, accessibility, sustainability, and community. Little academic research has been completed on the composition of coworking spaces and the businesses that use them. The purpose of this study is to examine the organization and characteristic of coworking space based on domestic and international cases for providing basic data on the coworking space plan. This study examined existing academic literature, media, online sources to assess the environmental background of worldwide coworking space, the current status, conceptualization, and membership plan that can be appled coworking spaces. The case study for coworking space is limited to the space where there is web site that is showed floor plan. Coworking spaces are designed to be environmentally friendly, offering common area with many facilities to encouraging community and collaboration. For creating ideal coworking space, the concept of coworking space must be recognized as a community space for interaction and creativity between people and space. Based on the result of this study, the appropriate zoning, circulation and specific floor plan of coworking space is needed for the next research.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.436-441
• /
• 2008

Contemporary workspace is configured in various manners according to working patterns, collaborative or independent nature of works, group-wise working styles and culture, the size of the group, and so on. On the other hand, conventional office space has tended to be a monolithic single space packed with various types of works. This change reflects what has happened to the meanings and structures of office space. The ubiquitous computing technique is being applied to the development of the intelligent office as it grows. This leads to the change of intelligent office technology which provides user-oriented spatial service. This paper focuses on the conceptualization and design of service scenarios or the intelligent office based on the user-oriented spatial service paradigm.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.164-173
• /
• 1999

Robot calibration needs accurate measurements of robot end-effector position at a number of different robot configurations. One of the efficient ways of the measurement is "Touching on Jig" method suggested in [7], which utilizes a touch sensor and a fixture consisting of various sizes of blocks. By moving the end-effector to touch the surface of a block whose position relative to the other is known, the end-effector position relative to the fixture coordinate system can be obtained at the instant of touching. However, the global size of fixture is too small to cover the various configurations of the robot. Because of the manufacturing difficulties, the fixture cannot be manufactured large enough for well distributed position measurement. It results in the improvement of robot accuracy only in the limited space near to the fixture rather than over the whole space of the robot working volume. The paper proposes a method to resolve the above problem by measuring the end-effector positions with respect to several different coordinate system using the same measurement devices. It is found that the proposed method leads the improvements of robot position accuracy over the large space of working volume. The experimental studies are performed to show the validity of the method and their results are discussed.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.1
• /
• pp.49-56
• /
• 2008

Foodwaste will be able to treat is 13,000 ton/day. $18{\times}10^{13}$ won/yr are wasted with the foodwaste treatment. As a result, the initial working condition. These are given as follows : On the 1st. week, the foodwaste of the 130 ton/week(digest sludge : input foodwaste = 20 : 1) is being put into a DRANCO system by the space of 2 day. On the 2nd week, the food waste of the 130 ton/week(5 day) is being put into a DRANCO system by the space of 2 day. On the 3rd week, the foodwaste of the 130 ton/week is being put into a DRANCO system by the space of 3day. On the 4th week, the foodwaste of the 350 ton/week is being put into a DRANCO system. After that time, increase the quantity than last week is 10%. Under steady-state working condition, the methane content of the biogas is more then 55%. The $NH_3-N$ content of the digest sludge is under 3,500ppm. The VFA content of the digest sludge is under 1,500ppm. The pH is more then 8. The TS content of the digest sludge is $18{\sim}22%$. The VS content of the digest sludge is under 65%.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.36.2-36.2
• /
• 2010

Followed the System Design Review (PDR) of a mobile SLR (Satellite Laser Ranging) system, a successful preliminary design review was finished in 2009. With the completion of this mobile SLR system, KASI (Korea Astronomy and Space Science Institute) can perform a series of test observation and calibration/validation procedures. After the operation performance of the whole system reaches the nominal design, a regular scheduled observation will be executed. However, the project has been disturbed by the frequent change of working staff, budget profile, and plan as well as the inexperienced man power. In this study, the contents and the issues of PDR are briefly reviewed and several items of SLR system are suggested. This mobile SLR system will push Korea's Space Geodetic study further and will make us jump to another step to the Space Science in Korea.

• Journal of Biosystems Engineering
• /
• v.17 no.1
• /
• pp.37-44
• /
• 1992

This study was intended to develop the design program of the working surface of moldboard-plow by use of the computer-aided design. The mathematical model of the working surfaces of moldboard-plows by use of computer graphics was developed and plotted in two dimension on three major planes. The surfaces of moldboard-plows were represented with "B-spline surface fitting" by selecting the twenty-five three-dimensional data that could well describe the working surface of moldboard-plow. The shape of moldboard-plow on three major planes was drawn for varied design parameters. The representation of the mathematical model for the working surfaces of various types of moldboard-plows was manipulated by translation, rotation and scaling about arbitrary axes in space. By using three-dimensional graphics techique to describe moldboard-plows, it was capable of plotting the three-dimensional shape of moldboard-plow easily and quickly in comparison with the existing design methods that were difficult to grasp the shape of moldboard-plow as a whole. The design theories of moldboard plow and three-dimensional computer graphic technique were applied to find out the improved reversible Jaenggi bottom. It was resulted in the newly developed shape of Jaenggi which may be used for improving the performance compared to existing ones.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.2
• /
• pp.7-16
• /
• 2019

Purpose: The courtyard in the ward can light and ventilate in the central space and corridor of the ward. It is possible to improve the disadvantages of the existing double-corridor ward. Also, there is the advantage in that patients are able to contact with nature indoors and cause positive activities. So, the purpose of this study is quantitatively analyze the floor area and the average distance of nurse working of the courtyard in ward. Methods: The subjects are converted through the same criteria setting. And it investigate and analyze the influence of the courtyard in the ward through the analysis of the spatial composition. Result: The factors that affected the floor area increase are the planning courtyard, the corridor type and the dispersion of the medical rooms. The average distance of nurse working is more influenced by the nursing management system of the hospital than by the courtyard. So, It can improve according to the position and number of nurse station. Implications: It can be used as a primary data for courtyard plan in the ward for positive patient environment plan considering the floor area, average distance of nurse working.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1886-1900
• /
• 2018

This paper proposes a confronting feedback control structure and controllers for positive output elementary super lift Luo converters (POESLLCs) working in discontinuous conduction mode (DCM). The POESLLC offers the merits like high voltage transfer gain, good efficiency, and minimized coil current and capacitor voltage ripples. The POESLLC working in DCM holds the value of not having right half pole zero (RHPZ) in their control to output transfer function unlike continuous conduction mode (CCM). Also the DCM bestows superlative dynamic response, eliminates the reverse recovery troubles of diode and retains the stability. The proposed control structure involves two controllers respectively to control the voltage (outer) loop and the current (inner) loop to confront the time-varying ON/OFF characteristics of variable structured systems (VSSs) like POESLLC. This study involves two different combination of feedback controllers viz. the proportional integral controller (PIC) plus sliding mode controller (SMC) and the fuzzy logic controller (FLC) plus SMC. The state space averaging modeling of POESLLC in DCM is reviewed first, then design of PIC, FLC and SMC are detailed. The performance of developed controller combinations is studied at different working states of the POESLLC system by MATLAB-Simulink implementation. Further the experimental corroboration is done through implementation of the developed controllers in PIC 16F877A processor. The prototype uses IRF250 MOSFET, IR2110 driver and UF5408 diodes. The results reassured the proficiency of designed FLC plus SMC combination over its counterpart PIC plus SMC.