• International Journal of Computer Science & Network Security
• /
• 제24권7호
• /
• pp.63-72
• /
• 2024

This is an extended paper, focusing on the cost management for the organizations dealing with the crucial issues of security systems. Information Technology (IT) is an important and irreplaceable need of society and all working sector's success depends on IT to a greater extent; therefore maintaining security features is one of the most important aspects of IT. When security in the IT sector is discussed, Patch Management (P.Mgnt) has to be taken under account. P. Mgnt includes many concerns and areas to be described for IT security such as methods and problems in updating patch, methods of reducing security risks with P.Mgnt, methods of achieving economies of scale by controlling the operational costs and taking decisions in investing as and when necessary. This paper presents a general definition of Patch management, its benefits and management of working cost through theoretical models, also the paper gives methods of feeding techniques for microstrip patch antenna MPA, showing the contracting and non contracting methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.869-874
• /
• 1988

The operational control of the rotary snowplow is considered to improve its working efficiency. The speed of the rotary snowplow is controlled, so that the load to the rotary snowplow is kept constant. As the load can not directly be detected, some items considered for the controlled variable are, for example, the engine revolution, the load pressure and etc. In order to examine these, the working simulation of the rotary snowplow was considered by introducing the experimental equation of the load. The control methods were examined by means of the simple digital control using the personal computer. These control methods were compared with simulations and experiments. Consequently, the working efficiency is improved about 20% than the manual operation.

• 한국지능시스템학회논문지
• /
• 제17권5호
• /
• pp.654-659
• /
• 2007

본 논문에서는 AGVS(Automated Guided Vehicle System)가 여러 복잡한 작업 환경 또는 작업 환경 변경 시 좀 더 유연하게 운용될 수 있도록 작업환경 내에서 AGVS에 필요한 작업공간요소를 분류하고 이들을 모델링하는 방법을 제안한다. 또한, 그래프 탐색 방법인 A* 알고리즘을 이용하여 AGV의 최단 경로 탐색 알고리즘을 본 논문의 작업환경 요소로서 재 표현한다. 생성된 최단 경로와 본 논문에서 가정한 AGV의 속도 테이블을 이용하여 운행 중인 AGV의 경로 점유 시간 알고리즘을 제안한다. 마지막으로 간단한 시뮬레이션을 통하여 제안한 방법의 적용 가능성을 증명한다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.304-309
• /
• 2015

On construction sites, it is important to monitor the performance of construction equipment and workers to achieve successful construction project management; especially, vision-based detection methods have advantages for the real-time site data collection for safety and productivity analyses. Although many researchers developed vision-based detection methods with acceptable performance, there are still limitations to be addressed: 1) sensitiveness to the shape and appearance changes of moving objects in difference working postures, and 2) high computation time. To deal with the limitations, this paper proposes a detection algorithm of construction equipment based on Integral Channel Features. For validation, 16,850 frames of video streams were recorded and analyzed. The results showed that the proposed method worked in high performance in terms of accuracy and processing time. In conclusion, the developed method can help to understand useful site information including working pattern, working time and input manpower analyses.

• 대한조선학회지
• /
• 제19권2호
• /
• pp.41-60
• /
• 1982

The main idea of this report, which deals with the process analysis in outfitting fields, is to improve working methods and further to secure higher productivity by removing unreasonable work factors in the workshop with the economical point of view. For this purpose, a series of techniques has been applied to some parts of chronically less productive outfitting works, expecting less man hour consumption and better working conditions to go with it. That is to make full use of process chart flow diagram(man & machine chart gang process chart). The text gives brief introductions of the charts respectively and the appendix shows actual practice directly applicable for the guidance of utilizing these charts. As the result of this, some of unreasonable work factors are removed from the total cycle and finally standard working method & time can be come out by reasonable working time and gradually improved working method.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.81-86
• /
• 2005

The agricultural working tractor of this study is equipped with 4 wheel driving system developed in study 1 and 4-type wheel steering system. The wheel steering system has four type of steering methods that are front wheel steering, rear wheel steering, 4 wheel steering with opposite phase, and 4 wheel steering with corresponding phase. This study introduces the hydraulic circuit of the 4-type wheel steering system and the construction of working tractor. Judging from the field test results of the developed working tractor, it is apparent that 4-type wheel steering system has many advantages when driving in a narrow corral.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.109-117
• /
• 2014

PURPOSES : This study analyzes the available working time at work-zone on the Expressway in accordance to the new capacity manual. METHODS : Sensitivity analysis on variables were conducted to calculate the adjusted capacity at work-zone based on previous researches. RESULTS : The main factors which affect available working time at the work-zone were its capacity, number of lanes, terrain and lane width. Other factors have minimal effect on the available working time. Based on the analysis, a calendar of lane closures was suggested. CONCLUSIONS : A series of studies concluded that the capacity at work-zone in the new capacity manual reduced to 76-82% of the existing manual. As such, the available working time decreased. Furthermore, the factors affecting the available working time needs to be considered when making a plan to rehabilitate the distressed pavement.

• 한국치위생학회지
• /
• 제18권5호
• /
• pp.675-682
• /
• 2018

Objectives: This study was performed to characterize edema of the lower extremities that occurs among hygienists during working hours, and to determine the effects of the use of elastic compression stockings. Methods: The study subjects were 40 dental hygienists working at a dental hospital in Daegu. Symptoms of edema of the lower extremities during working hours were characterized by measurement of calf and ankle circumference. Results: Calf and ankle circumference increased during working hours. The use of elastic compression stockings reduced edema of the lower extremities during working hours. Conclusions: Use of elastic compression stockings can reduce levels of lower extremity edema among dental hygienists.

• 아동학회지
• /
• 제27권1호
• /
• pp.31-44
• /
• 2006

This study focused on the lives of working mothers in its examination of the meaning of an employer supported educare center. Ethnographic methods including participant observation, in-depth interview, and the analysis of documents were used for the case study at D educare center where management has been entrusted to K University. Results showed that employer supported educare center had significant meanings in the lives of working mothers. Meanings consisted of stories about relieving time conflicts, adapting themselves to life space, putting confidence in the educare center, and organizing community. Meanings gained from this study suggest that D educare center could be a model for employer supported educare centers focused on the lives of working mothers.

• 한국직업건강간호학회지
• /
• 제29권2호
• /
• pp.133-139
• /
• 2020

Purpose: This study aimed to identify the influence of consecutive night-shift work and working time on insomnia among hospital nurses. Methods: A descriptive correlational research designutilizing secondary data analysis was adopted. Data on consecutive night-shift work, working time, and insomnia were collected from 64 hospital nurses using a Fitbit activity tracker and questionnaires, and analyzed using hierarchical logistic regression. Results: Consecutive night-shift work for more than three days had a significant influence on insomnia among hospital nurses. Weekly working hours also accounted significantly for the variance in insomnia, exceeding the influence of consecutive night-shift work. Conclusion: Development and implementation of proper schedules to control consecutive night-shift work and working time is important to alleviate insomnia among hospital nurses.