• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.806-809
• /
• 1996

The present development relates to an apparatus for loading or unloading a workpiece, and more particularly, to an apparatus for loading or unloading a workpiece from a press die or supplier An apparatus for loading or unloading a workpiece has been installed in a press in order to load or unload a workpiece from a press die. There has been known such a loading or unloading apparatus as the apparatus can feed a workpiece in not only the horizontal direction but also in the vortical direction. Press working system in automotive factories are now switching over to a transfer press work ing system. The current problem to be sieved immediately is to automate the existing manual press lines for the manpower saving and speedy production. “Automation system for press line”has just been developed to meet the above trend. The loader and unloader are development under the design concept for high performance, easy control and operational safety to meet the more extensive.

• 드라이브 ㆍ 컨트롤
• /
• 제13권1호
• /
• pp.27-33
• /
• 2016

In hydraulic machinery, the hydraulic fluid acts primarily as working fluid and secondarily as a lubricant. Hence, the viscous friction force acting on the sliding components should be reduced to improve the mechanical efficiency. It is now well known that the surface texturing is a useful method for friction reduction. In this study, using a commercial computational fluid dynamics (CFD) code, FLUENT, the lubrication characteristics of a surface textured slider bearing under high boundary pressure difference is studied. The streamlines, velocity profiles, pressure distributions, load capacity, friction force and leakage flowrate are highly affected by the film thickness ratio and the textured region. Partial texturing at the inlet region of the inclined slider bearing can reduce both friction force and leakage flowrate than in the untextured case. The present results can be used to improve the lubrication characteristics of hydraulic machinery.

• 패션비즈니스
• /
• 제3권4호
• /
• pp.83-91
• /
• 1999

The purpose of this study is to provide some useful references to the educational field in terms of providing on analysis of job characteristics of fashion designers working in the women's wear industries. The data were collected from 102 fashion designers working in women's wear industries through the questionnaire and were analyzed by SPSS packages of frequencies and percentiles for comparative study, and the results are as follows: 1. The demographic characteristics of the fashion designers are; unmarried (80.4%), working less than 2 years (20.2%), completion of junior college(68.6%), majority ages between 20-24 yrs(43.1%). An average length of working in one company war less than 6 months. 2. The ratio computer usage of the design room was approx. 52.0% especially in the management of sales (52.9%) and the ratio in fashion design was approx. 17.6% in merchandising planning. 3. 76.4% of respondents was working 10 hours a day, and 50% of them was dissatisfied on the job caused by excessive working hour (31.4%) and job over load (35.3%). In the developing fashion design with the relation of actual job, insufficient knowledges of the concerned technical and production fields (68.6%) were indicated as the most difficult area. In addition, fashion magazines were considered as the most helpful resource(94.1%). 4. It was noted that the target age groups for the brand were clearly divided into two groups, notably the early and middle of twenties and the early and middle forties. Among the produced items, formal wears were accounted for 52.9%. 5. As far as the contents of job are concerned, the fashion designers are mostly engaged in purchasing textile, collecting informations of fashion, quality control, whereas their actual job is apparel design. 6. The training that the fashion designer received beside formal education includes attendance of private institutes(62.7%), OJT(7.8%), seminars(4.9%). Regarding formal education, the respond indicated that they had least opportunity to received computer training. 7. The necessary subjects in the schools for the fashion designers in relation to the current job were fashion information, merchandising planning, pattern making, cutting, fashion marketing, knowledges of clothing material in sequence. Subjects which are necessary for the further development include pattern making(21.6%), fashion marketing(14.7%), and designing with computer(7.8%).

• Journal of Communications and Networks
• /
• 제17권1호
• /
• pp.47-57
• /
• 2015

With the ever growing demand of data applications, the joint macro-relay networks are emerging as a promising heterogeneous deployment to provide coverage extension and throughput enhancement. However, the current cellular networks are usually designed to be performance-oriented without enough considerations on the traffic variation, causing substantial energy waste. In this paper, we consider a joint macro-relay network with densely deployed relay stations (RSs), where the traffic load varies in both time and spatial domains. An energy-efficient scheme is proposed to dynamically adjust the RS working modes (active or sleeping) according to the traffic variations, which is called traffic-aware relay sleep control (TRSC). To evaluate the performance of TRSC,we establish an analytical model using stochastic geometry theory and derive explicit expressions of coverage probability, mean achievable rate and network energy efficiency (NEE). Simulation results demonstrate that the derived analytic results are reasonable and the proposed TRSC can significantly improve the NEE when the network traffic varies dynamically.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.769-777
• /
• 1999

This paper presents models for the dynamic simulation of a regenerative gas turbine and describes dynamic behaviors of a small regenerative engine. A quasi-steady model is introduced where the inertia of the working fluid is assumed to be negligible compared with the mechanical inertia of the rotating shaft. Based on this quasi-steady model, the transient model for the heat exchanger is employed to simulate the unsteady heat exchange in the recuperator. The effect of the thermal inertia of the recuperator metal on transient behaviors is analyzed by comparing the predicted results of the transient and steady state heat exchanger models. For several load change modes such as sudden increase, decrease and periodic variation, engine dynamic characteristics are investigated by applying a fuel control logic for the constant shaft speed. It is found that the thermal inertia of the recuperator metal has a dominant effect on the whole engine dynamic behavior.

• 대한조선학회논문집
• /
• 제52권2호
• /
• pp.135-142
• /
• 2015

The Anti-Rolling Tank(ART) has an advantage over the other roll stabilizing devices, when ship is staying and working at one site of sea. An important design point of ART is the tank tuning, that is, matching the tank natural period to the ship's roll natural period. Since the load condition and consequently the roll natural period of ship is to be changed widely, the natural period of ART also has to be changed widely. In case of the existing U-tube type ART with a single layer duct, the tank natural period can be changed in a relatively narrow range. This paper suggests a new U-tube type ART system using a double layer duct to enable wide change of ART natural period. Through the roll experiments performed in regular beam waves for a box-type model ship, it is shown that the double layer duct ART has about two times wider period range and a better reducing effect of roll magnitude than the single layer duct ART.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.100-106
• /
• 2023

We developed a crawler-based driving platform that can perform harvesting, transportation, pest control, and rotary operation by equipping it with various implements, and analyzed its performance. This single platform was developed to perform as pepper harvester, peanut harvester, and transporter with a 46-kW engine. A simulation model was developed to study the specifications of the platform, and the accuracy was also analyzed. The absolute percentage error ranged from 0.2 to 5.9%, which made it possible to predict the platform performance using simulation model. In T-test, both torque and speed on field and asphalt showed a significant difference (1%). Driving torque required differed depending on the nature of the field, and the speeds also changed based on soil load. The developed platform has the advantage of being equipped with a variety of working tools, expected to be used to harvest root crops in the future.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.234-250
• /
• 2018

This paper presents a new load sharing control for use between paralleled three-phase inverters in an islanded microgrid based on the online line impedance estimation by the use of a Kalman filter. In this study, the mismatch of power sharing when the line impedance changes due to temperature, frequency, significant differences in line parameters and the requirements of the Plug-and-Play mode for inverters connected to a microgrid has been solved. In addition, this paper also presents a new droop control method working with the line impedance that is different from the traditional droop algorithm when the line impedance is assumed to be pure resistance or pure inductance. In this paper, the line impedance estimation for parallel inverters uses the minimum square method combined with a Kalman filter. In addition, the secondary control loops are designed to restore the voltage amplitude and frequency of a microgrid by using a combined nominal value SOGI-PLL with a generalized integral block and phase lock loop to monitor the exact voltage magnitude and frequency phase at the PCC. A control model has been simulated in Matlab/Simulink with three voltage source inverters connected in parallel for different ratios of power sharing. The simulation results demonstrate the accuracy of the proposed control method.

• 해양환경안전학회지
• /
• 제23권2호
• /
• pp.139-145
• /
• 2017

최근 이상적인 자연현상으로 인해 돌풍, 태풍 및 쓰나미 등 비상상황이 자주 발생하고 있고, 이로 인해 항내 계류선박은 선체거동을 미리 예측하여 해석하고, 선체거동을 제어하지 못해 계류선박의 계류시스템이 손상되면 해양사고가 발생할 수 있다. 따라서 계류시스템의 손상이 예상되는 경우 정량적 판단에 의해 항내 계류할 것인지 아니면 항외로 피항할 것인지 결정할 필요가 있다. 본 연구에서는 외력에 의한 계류선박의 거동해석 및 계류시스템 제어를 위해 대학내 전용 부두에 계류중인 실습선을 대상으로 계류안전성을 평가하였다. 계류삭의 최대장력을 분석한 결과, 파주기 12초 및 15초인 경우에는 대부분 허용강도(S.W.L)를 초과하는 것으로 분석되었다. 계선주에 작용하는 최대견인력을 분석한 결과, 해당 위치에 설치된 지 노후화된 소형 계선주에 다수의 계류삭을 체결함으로서 모든 평가 Case에서 계선주 허용규격인 35톤을 초과하는 것으로 분석되었다. 선체동요 및 하역안전성 평가결과 파주기 12초 이상 및 풍속 25노트 조건에서는 Surge 운동의 한계값인 3.0미터를 초과하는 것으로 분석되었다. 그 결과를 토대로 계류시스템 제어를 위한 판단기준이 되는 풍속, 파고 및 파주기 등의 주요 외력조건별 고위험, 위험 및 보통 위험 등 3단계의 리스크 매트릭스(Risk Matrix)를 작성하여, 계류시스템 제어를 위한 판단기준이 되는 위기관리 대응매뉴얼로 활용할 수 있을 것으로 기대된다.

• 생물환경조절학회지
• /
• 제3권1호
• /
• pp.1-9
• /
• 1994

본 연구는 상대적으로 활하중의 영향이 민감하게 작용하는 농업시설의 합리적 구조설계를 위하여 우리나라 60개 지역의 자료를 사용하여 중요한 설계하중의 결정요인인 단위적설중량, 순간최대풍속 및 최대신적설심의 그 적용에 관하여 검토하였고, 얻어진 결과를 요약하면 다음과 같다. 1. 적설심에 다른 단위적설중량을 분석한 결과 적설심에 따른 차이는 발견할 수 없었고 대체적으로 정규분포를 이루고 있다. 평균기온에 의하여 단위중량을 구분해본 결과 -1$^{\circ}C$ 이상에서는 단위중량이 평균 0.91kg/cm/$m^2$, -1$^{\circ}C$ 이하에서는 평균 0.58kg/cm/$m^2$로 나타나 기온에 의한 차이가 명확했다. 2. 평균최대풍속과 순간최대풍속과의 관계를 도출하여 회귀식을 유도한 결과, 일반적으로 사용하고 있는 순간최대풍속 관계식과는 약간의 차이를 보였다. 해안지방과 내륙지방에 2개지역으로 구분하여 순간최대풍속 관계식을 유도하였다. 3. 재현기간별 최대적설심과 최대신적설심을 비교한 결과, 눈이 적은 지방에서는 큰 차이가 없으나, 비교적 눈이 많은 지방의 경우 재현기간 8년에서는 24.6cm, 57년에서는 45.6cm로 큰 차이를 보여, 난방 및 적절한 관리를 전제로 설계하면 신적설에 의하여 설계하중을 크게 감소시킬 수 있음을 나타냈다. 4. 기존식과 수정식의 설계풍속(진주지역) 및 최대적설심과 최대신적설심(서산지역)의 적용시, 2연동아치형시설의 부재사용량은 각각의 경우에 대하여 +0.3배, -0.3배이었고, 2연동지붕형 시설의 부재사용량은 각각 +0.3배, -0.1배이었기 때문에 시설의 특성에 맞는 설계자료의 선정이 매우 중요하다.