• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.297-302
• /
• 1995

The experiment is conducted to reduce the labor and production cost with the labor save of harvest if cultivating the potatoes using the machine and the results are as follows. On labor saving effect in transparent vinyl mulching, digging working hours per 10a in the case of using tractor are 60 min., fixing + turning time is 5 min. and 30sec., the time of harvest is 65 min and 30sec., digging working hours using cultivator are 99 min. and fixing +turning time is 5 min. and 30sec., but the time of hand harvesting is 990 min. and in digging labor saving effect, tractor shows 94% in the harvesting period and harvest by cultivator 90%. On non mulching cases, the harvest by tractor takes 49 min. and 30 sec. and that by cultivator does 87 min. and 30 sec., and digging labor saving effect shows 94% in the tractor harvest and 90% in the cultivator harvest. Therefore, on the operation efficiency per hour, in the case of tractor with digger vinyl mulching and non mulching show, $0.091\sim0.121ha$ and in the case of cultivator with digger both show $0.057\sim0.069ha$, so in the mechanized harvest of potatoes, the harvest by tractor with digger is the best. On the cost and labor save for harvesting the potatoes with labor saving effect, tractor shows 19 hours and 20 min./10a in vinyl mulching and 19 hours. and 54 min./10a in non mulching, so it shows the short hours for harvesting. And labor saving effect shows $42\sim45%$ in comparison with 35 hours and 21 min. $\sim35$ hours and 23 min.($123,113\sim130,613$ won) of the hand harvest, so the cost was reduced to $71,250\sim72,225$ won. On the cultivator with diggers, vinyl mulching takes 19 hours and 55 min. and non mulching 19 hours and 38 min., so the labor saving effect and cost were reduced to $14\sim44%$ ($72,675\sim73,313$ won) in comparison with the hand harvest.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.435-448
• /
• 2022

Objectives: As the time spent wearing masks has increased with spread of COVID-19, various research related to masks have been reported. However, there are still few experiments on the physiological response of the body to wearing industrial dust masks in South Korea. Considering the actual working hours at the work site, it is necessary to investigate the comfort of industrial dust masks. Therefore, this study aims to confirm the change in subjective discomfort level according to the wearing time for industrial dust masks in South Korea that have been certified for safety by KCS. Methods: This study evaluated subjective discomfort level over four hours. The experimental conditions were five types: not worn (control group), special grade, first grade, second grade (with valve), and second grade (without valve). The subjective discomfort levels were classified for breathing, warmth (body and face) and wetness (body and face). Subjects recorded their discomfort level on a checklist every one hour. Results: In special grade and second grade (without valve), the discomfort level in terms of breathing, warmth (face), and wetness (face) was significantly higher than that of the control group. However, the effects of all kinds of industrial dust masks on the discomfort level in the body were low. Conclusions: Since this study was conducted on subjects working in an office with a comfortable working environment, it is difficult to apply it to workers at actual industrial sites. However, it is considered meaningful as the first clinical study to evaluate the subjective level of discomfort over a long time for domestic industrial dust masks that have been certified for safety by KCS.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.653-659
• /
• 2022

In this study, the awareness of hazardous chemicals and the need for education of dental hygienists were investigated. The subject of this study was an online survey of 103 dental hygienists working in medical institutions from June to August 2021 and analyzed using the SPSS 21.0 program. As a result, work experience was positively correlated with perception (r=.280, p<0.01) and work (r=.303, p<0.01), and work experience with perception (r=.411, p<0.01).Hazardous chemical information showed a positive correlation with practice (r=.371, p<0.01). As a result of the education requirement survey, only 27.2% had experience in hazardous chemical education, and 96.1% of the awareness of the need for education was highly surveyed. As for the desired method of education, 49.5% of them were online education, and the desired time for education was 1 hour. Therefore, in order to create a safe working environment for dental hygienists and to secure the safety of hazardous chemicals, it was necessary to expand educational opportunities at universities, medical institutions, and maintenance education, and to increase accessibility through online education.

• Journal of Radiation Industry
• /
• v.18 no.1
• /
• pp.43-52
• /
• 2024

Currently, there are no interim storage facilities and permanent disposal facilities in Korea, so all spent nuclear fuels are temporarily stored. However, the temporary storage facility is approaching saturation, and as a measure to this, the 2nd Basic Plan for the Management of High-Level Radioactive Waste presented an operation plan for dry interim storage facilities and dry temporary storage facilities on the NPP on-site. The dry storage can be operated in various ways, and to select the optimal dry storage method, the reduction of exposure for workers must be considered. Accordingly, it is necessary to develop a worker exposure scenario according to the dry storage method and evaluate and compare the radiological impact for each method. The purpose of this study is to develop an exposure scenario for workers transporting spent nuclear fuel by dry storage method. To this end, first, the operation procedure of the foreign commercial spent nuclear fuel dry storage system was analyzed based on the Final Safety Analysis Report (FSAR). 1) the concrete overpack-based system, 2) the metal overpack-based system, and 3) the vertical storage module-based system were selected for analysis. Factors were assumed that could affect the type of work (working distance, working hours, number of workers, etc.) during transportation work. Finally, the work type of the processes involved in transporting spent nuclear fuel by dry storage method was set, and an exposure scenario was developed accordingly. The concrete overpack method, the metal overpack method, and the vertical storage module method were classified into a total of 31, 9, and 23 processes, respectively. The work distance, work time, and number of workers for each process were set. The product of working hours and number of workers (Man-hour) was set high in the order of concrete overpack method, vertical storage module method, and metal overpack method, and short-range work (10 cm) was most often applied to the concrete overpack method. The results of this study are expected to be used as basic data for performing radiological comparisons of transport workers by dry storage method of spent nuclear fuel.

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.190-199
• /
• 2003

This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.342-352
• /
• 2020

Objectives: The characteristics of research workers are different from those working in the manufacturing industry. Furthermore, the reagents used change according to the research due to the characteristics of the laboratory, and the amounts used vary. In addition, since the working time changes almost every day, it is difficult to adjust the time according to exposure standards. There are also difficulties in setting standards as in the manufacturing industry since laboratory environments and the types of experiments performed are all different. For these reasons, the measurement of the working environment of research workers is not realistically carried out within the legal framework, there is a concern that the accuracy of measurement results may be degraded, and there are difficulties in securing data. The exposure evaluation based on an eight-hour time-weighted average used for measuring the working environment to be studied in this study may not be appropriate, but it was judged and consequently applied as the most suitable method among the recognized test methods. Methods: The investigation of the use of chemical substances in the research laboratory, which is the subject of this study, was conducted in the order of carrying out work environment measurement, sample analysis, and result analysis. In the case of the use of chemical substances, after organizing the substances to be measured in the working environment, the research workers were asked to write down the status, frequency, and period of use. Work environment measurement and sample analysis were conducted by a recognized test method, and the results were compared with the exposure standards (TWA: time weighted average value) for chemical substances and physical factors. Results: For the substances subject to work environment measurement, the department of chemical engineering was the most exposed, followed by the department of chemistry. This can lead to exposure to a variety of chemicals in departmental laboratories that primarily deal with chemicals, including acetone, hydrogen peroxide, nitric acid, sodium hydroxide, and normal hexane. Hydrogen chloride was measured higher than the average level of domestic work environment measurements. This can suggest that researchers in research activities should also be managed within the work environment measurement system. As a result of a comparison between the professional science and technology service industry and the education service industry, which are the most similar business types to university research laboratories among the domestic work environment measurements provided by the Korea Safety and Health Agency, acetone, dichloromethane, hydrogen peroxide, sodium hydroxide, nitric acid, normal hexane, and hydrogen chloride are items that appear higher than the average level. This can also be expressed as a basis for supporting management within the work environment measurement system. Conclusions: In the case of research activity workers' work environment measurement and management, specific details can be presented as follows. When changing projects and research, work environment measurement is carried out, and work environment measurement targets and methods are determined by the measurement and analysis method determined by the Ministry of Employment and Labor. The measurement results and exposure standards apply exposure standards for chemical substances and physical factors by the Ministry of Employment and Labor. Implementation costs include safety management expenses and submission of improvement plans when exposure standards are exceeded. The results of this study were presented only for the measurement of the working environment among the minimum health management measures for research workers, but it is necessary to prepare a system to improve the level of safety and health.

• Korean Security Journal
• /
• no.2
• /
• pp.259-289
• /
• 1999

The Security Industry has dynamic working conditions. So this study intends to find the advisable direction for the reduction of accidents. To achieve the aim, the investigation of documents and the examinations of actual proofs have been done to figure the theoretical background and to see the basic knowledge of security industry. The questionnaire was composed of two question sheets to search real data and actual proofs, with making targets of pure security organization and personnel. The one consists of 9 questions to find the scale and extent of security organizations and the population and character of security personnel, and the other 25 questions in 3 major areas to analyze the causes, the frequency rates, the factors, and the condition of accidents. The period of survey was July 15th to October 15th in 1997 by mail/telephone/interview. The questionnaires were efficiently returned from 102 different organizations including the public security groups of Seoul Metropolitan Police Bureau and so on, with the information of 8,222 persons having worked for Korean Security Industry in 1996. So being based on the reality, some meaningful facts were found, and were compared with the national statistics of the Government. This study is made up of 5 chapters : in the 1st chapter the motivation, the object, the method, the direction and the limitation of the approach were presented ,in the 2nd chapter the theoretical background were inferred ; in the 3rd chapter the collected data of accidents in Korean Security Industry were analyzed and explained on the base of the questionnaires , in the 4th chapter the advisable facts connected with preventing accidents were mentioned ; in the last the conclusion were stated. With the replies of 102 different organizations including the information of 8,222 persons in 1996, the main facts found or analyzed through this study are as follows. Firstly, accident is an unpredictable and occasional event. It occurs to man and/or thing, but the frequency rate of accidents in Korean Government and other Institutes has been calculated and evaluated only in the point of the accident related with man. Secondly, the factors of accidents are firstly relevant to the way preventing accidents in Security Industry in Korea. However the frequency rate is academically calculated and evaluated by at once man(population) and hour(time). But the Government has done the rate only by man(population). This can be improper and inaccurate rates. Thirdly, the confused concept of security is used in Korean Government, academic society, corporation and so on. Therefore the detailed formation of the concept is needed for the development of Security Industry in Korea. Fourthly, security organizations can be classified into 'public security(public law enforcement)' and 'private security' according to its identification, and furthermore 'private security' can be divided into 'facilities-guard service', 'body-guard service', and 'patrol service' according to its major role. Fifthly, in the viewpoint of the number of both organization and population,'facilities-guard service' is centered in Korean 'private security'. According to the analyzed results of the questionnaires in this study, the frequency rate of accidents of Korean Security Industry is 0.43(%) totally in 1996 : 'facilities-guard service' 0.54(%), 'body-guard service' 0.12(%), and 'patrol service' 0.21(%) in 'private security', and 'public security' 0.20(%). With regard to the accident frequency rate of organization and population, 'facilities-guard service' is the highest. The accident frequency rate of population in 'facilities-guard service' organization ranges dispersively from 0.20(%) to 11.11(%). Sixthly, the accidented rate of workers having serviced for under one year is 57.6(%). This can mean that the main factor of accidents in Korean Security Industry is the lack of role-understanding and training/education. And another factor can be found on the time of accident occurrence. Many accidents have been occurred on the relaxed points like as just after lunch and morning rush-hour. Lastly, the major advisable facts related to preventing accidents are as follows : The workers who are over fifty years old in 'facilities-guard service' organization need to be educated for preventing accidents ; It is desirable that the training and education to prevent accidents should be practiced in the time of pre-service ; As the style of accidents and the age of the accidented are not same according to major service area('public security' and 'private security' : 'facilities-guard service', 'body-guard service', and 'patrol service'), the plans to prevent accidents must be different and various. However fracture and bruise are general accidents in Korean Security Industry ; Workers must care about traffic accident and violent fall ; It seems that the grouped working with other two persons will reduce accident occurrence possibility rather than individually single working.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.1 s.19
• /
• pp.16-30
• /
• 1986

In order to prepare the fundamental data for the improvement of noisy working environments and the effective hearing conservation program on workers exposed to industrial noise, the authors surveyed the working processes and evaluated the noise levels on 56 manufacturing industries in Pusan area from April to July in 1985. The results were summarized as follows : 1. The noise level was the highest in shipbuilding and repairing(95.6 dBA), and followed by steel rolling(94.0 dBA), manufacture of motor vehicles(93.1 dBA), manufacture of fishing nets(92.9 dBA), manufacture of testiles(92.5 dBA), iron and steel foundries(89.3 dBA), manufacture of metal products(89.1 dBA), preserving and processing of marine foods(87.0 dBA), manufacture of rubber products(85.3 dBA), manufacture of plywood(84.9 dBA) and manufacture of paints(84.5 dBA). 2. Among fifty surveyed working processes, the noise level of twenty-one processes (42%) exceeded the threshold limit value for 8 hours per day. 3. As the allowable exposure times by governmental threshold limit values to industrial noise level(dBA), cocking of shipbuilding and repairing and plating(CGL) of steel rolling were the shortest(30 minutes), and followed by assembling(rivet) of manufacture of motor vehicles(1 hour) weaving of manufacture of textiles and shot, machine, pipe laying of shipbuilding and repairing(2 hours). 4. By the result of octave band analysis on noisy working processes in excess of 90 dBA, the sound level was the highest at 2,000 Hz or 4,000 Hz. 5. It was recognized that the measurement of overall sound pressure level was also effective as octave band analysis in evaluating the industrial noise.

• Journal of Family Resource Management and Policy Review
• /
• v.16 no.1
• /
• pp.199-227
• /
• 2012

Studies of leisure time generally have been concentrated on the amount of time spent by each family member in Korea. In this study, the shared leisure time among family members in various leisure activities was mainly investigated. Purposes of this study were to describe how family members spent the leisure time together and to investigate the determinants that affected whether or not family shared leisure time together. The data source was the '2009 Time Use Survey' conducted by the Korea National Statistical Office. The person involved in each activity was surveyed for the first time in the survey. The data from 17,470 diaries(10,359 weekdays and 3,549 Sunday) from 8,745 individuals aged from 20 to 59 who had a spouse were analyzed. The descriptive statistics and logistic regressions were used. On average, married couples spent leisure time together with spouses 36 minutes a day on weekdays and 1 hour and 38 minutes on Sunday, respectively. Parent did with preschool children 5 minutes a day on weekdays and 15 minutes on Sunday, respectively. The shared leisure time with other family and relatives was 22 minutes a day on weekdays and 1 hour and 13 minutes on Sunday, respectively. Although there was a wide variation on the shared family leisure time by the types of activities, the main shared leisure activity was using mass media, which accounts for about two third of all shared leisure time together with family. Independent variables, including the age, sex, education level, working hours, personal income, presence of preschool children, marital status, sex role attitude, and dual or single income earner were the significant determinants of family's or couple's parent-preschool children's shared leisure time on weekdays or Sunday. Based on the results of this study, family and leisure policy were suggested to increase active family shared leisure time.