• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.79-87
• /
• 1997

This study was performed to evaluate basic characteristics of electron beam welding process for a 9% Ni steel plate. The principal welding process parameters, such as working distance, accelerating voltage, beam current and welding speed were investigated. The AB (Arata Beam) test method was also applied to characterize beam size and energy density of the electron beam welding process. The electron beam size was found to decrease with the increase of accelerating voltage and the decrease of working distance. So, in case of high voltage (150kV), spot size and energy density of electron beam were revealed to be 0.9mm and $6.5\times10^5W/\textrm{cm}^2$ respectively. The accelerating voltage among the welding parameters was found to be the most important factor governing the penetration depth. When the accelerating voltage of electron beam was low ($\leq$90kV), beam current and welding speed did not affect on the penetration depth significantly. However, in case of high voltage ($\geq$120kV), the depth of penetration increased very sensitively with the increase of beam current and the decrease of welding speed.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.121-126
• /
• 2005

Recently, an optical disc system has been proposed using blue laser diode, high NA objective lens and groove only disc structure. A new method is needed to readout CD and DVD in this Blu-Ray Disc Recorder. In order to readout CD and DVD in Blu-Ray Disc Recorder, we adopted dual-lenses actuator in consideration of optical utilization efficiency, optical performance and insurance of sufficient W.D(working distance). This dual-lenses actuator has two objectives in radial direction, one is for CD/DVD and the other is for BD. We had to solve the induced problems of collision between disc and lens, DC tilt increase, AC tilt increase, 2nd resonance deterioration and AC sensitivity drop caused by disposing two lenses in an actuator. Also we developed high response twin- objective actuator with radial tilt function to apply high-speed BD Recorder or BD Player. Consequently we presented that two kinds of dual-lenses actuators for BD Recorder have been possessed good performance in 3 axis directions. And we measured eye patterns of CD, DVD and BD by using one BD optical pick-up with dual-lenses actuator.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.235-238
• /
• 2005

A Multiple electron beam lithography system with arrayed microcolumns has been developed for high throughput applications. The small size of the microcolumn opens the possibility for arrayed operation on a scale commensurate. The arrayed microcolumns based on of Single Column Module (SCM) concept has been fabricated and successfully demonstrated. Low energy microcolumn lithography has been operated in the energy range from 250 eV to 300 eV for the generation of nano patterns. Probe beam current at the sample was measured about >1 nA at a total beam current of $0.5\;{\mu}A$ and a working distance of $\~1\;mm$. The magnitude of probe beam current is strong enough for the low energy lithography. The thin layers of PMMA resist have been employed. The results of nano-patterning by low energy microcolumn lithography will be discussed.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.194-199
• /
• 2003

The analysis of operation characteristics of a miniaturized electrostatic electron lens system called an Einzel lens was performed using a simulation tool of FCM method. The potential distributions of Einzel lenses operated both in retarding and accelerating modes show similar features. But the electric fields determined from the potential distributions show opposite directions, which results in different features in the electron beam trajectory in each mode of operation. For the same working distance, focusing voltage in the accelerating mode is higher than that in the retarding mode.

• Current Optics and Photonics
• /
• v.5 no.5
• /
• pp.500-505
• /
• 2021

We demonstrated a wide-fan-angle flat-top irradiance pattern with a very narrow linewidth by using an aspheric lens and a long-pitch reflective diffraction grating. First, we numerically designed a diffraction-based linear beam homogenizer. The structure of the Al diffraction grating with an isosceles triangular shape was optimized with 0.1-mm pitch, 35.5° slope angle, and 0.02-mm radius of the rounding top. According to the numerical results, the linear uniformity of the irradiance was more sensitive to the working distance than to the shape of the Al grating. The designed Al grating reflector was fabricated by using a conventional mold injection and an Al coating process. A uniform linear irradiance of 405-nm laser diode with a 100-mm flat-top length and 0.176-mm linewidth was experimentally demonstrated at 140-mm working distance. We believe that our proposed linear beam homogenizer can be used in various potential applications at a precise inspection system such as three-dimensional morphology scanner with line lasers.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.59-64
• /
• 2019

In this paper, we introduced a near-infrared multi-channel fluorescence imaging system and analyzed the effects of measurements variables such as exposure time, working distance and intensity of excitation light. Fluorescence signal is increased as exposure time becomes longer, excitation light intensity increases or working distance becomes smaller. Furthermore, the proper composition of optical filters and precise packaging of the imaging modules prevent the increase of background signal. Thus, we confirmed an increase in SBR. Based on the result of this research, we proposed a method to use a multi-channel fluorescence imaging system.

• Geomechanics and Engineering
• /
• v.19 no.3
• /
• pp.269-282
• /
• 2019

Due to top-coal and immediate roof as cushion layer connecting with support and overlying strata, it can make significant influence on strata behaviors in fully mechanical top-coal caving working face (TCCWF). Taking Qingdong 828 working face as engineering background, $FLAC^{3D}$ and $UDEC^{2D}$ were adopted to explore the influence of top-coal thickness (TCT), immediate roof thickness (IRT), top-coal elastic modulus (TCEM) and immediate roof elastic modulus (IREM) on the vertical stress and vertical subsidence of roof, caving distance, and support resistance. The results show that the maximum roof subsidence increases with the increase of TCT and IRT as well as the decrease of TCEM and IREM, which is totally opposite to vertical stress in roof-control distance. Moreover, although the increase of TCEM and IREM leading to the increase of peak value of abutment pressure, the position and distribution range have no significant change. Under the condition of initial weighting occurrence, support resistance has negative and positive relationship with physical parameters (e.g., TCT and IRT) and mechanical properties (e.g., TCEM and IREM), respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1644-1651
• /
• 2013

The purpose of this study was to investigate the influence of distance education experience using users' avatars in virtual reality space on their teaching efficacy belief. There were 9 participants who were enrolled in a course in doctoral program of education department in J University for the study. The first class of six sessions was face to face class on how to use Second Life and the 14 classes of 3 sessions were done in a classroom of Second Life. According to the analysis of reflection notes, interviews, researcher's observations of 5 participants, their experiences of presentation and taking classes in distance education using their own avatars in Second Life had positive influence on participants' teaching efficacy belief in their future working for distance education using avatars of Second Life. The implication of this study is to show some conditions for successful distance education as well as to see the potential of distance education in 3D virtual reality space using avatars. This study will contribute to promote the future study in distance education field.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.1
• /
• pp.45-53
• /
• 1995

Working depth of the model net was determined by using of the same experimental tank and the same model net that used in the forwarded report in a series studies. The depth of the net which indicates the depth of the head rope from the water surface, was determined by the photographs taken in front of the net mouth with the combination of towing velocity, warp length and distance between paired boats. The results obtained can be summarized as follows: 1. Working depth of model nets A and B was varied in the range of 0.09~1.66$m$,and 0.04~1.34$m$(which can be converted into 2.7~40.2$m$and 1.2~49.8$m$in the full-scale net) respectively, and the depth of model net A was slightly deeper than the depth of the model net B. 2. Working depth ($D$,which is appendixed m for the model net, f for the full-scale net, A and B for the types of the model nets) can be expressed as the function of towing velocity$V_t$, as in the model net($V_t$=$m$/$sec$) $D_{mA}$=(-1.99+0.65$L_w$) $e^{-1.72V_t}$ $D_{mA]$=(-1.91+1.04 $L_w$) $e^{2.88V_t}$ in the full-scale net($V_t$=$k$'$t$ $D_{fA}$=(-29.32+0.65$L_w$)$e^{0.40 V_t}$ $D_{fB}$=(-57.60+1.04$L_w$)$e^{-0.67 V_t}$ 3. Working depth 9$D$ appendixes are as same as the former) can be expressed as the function of warp length$L_w$) in the model net, and can be converted into full-scale net as in the model net ($V_t$=$m$/$sec$) $D_{mA}$=-0.99 $e^{-1.42V_t}$+0.67$e^{-1359V_t}$$L_w$ $D_{mB}$=-.258$e^{-3.77V_t}$+1.16$e^{-3.15V_t$ $L^w$, in the full-scale net($V_t$=k't) $D_{fA}$=-29.28$e^{-0.32V_t}$+0.67$e^{-0.37V_t$$L_w$ $D_{fB}$=-69.10$e^{-0.81V_t}$+1.16$e^{-0.72V_t}$$L_w$. 4. Working depth was gradually shallowed according to the increase of the distance between paired boats.

• Korean Journal of Human Ecology
• /
• v.22 no.2
• /
• pp.375-389
• /
• 2013

This survey was conducted to compare the housewife's food habit and food purchase behavior on healthy dietary life. The questionnaires were collected from 151 working housewives and 159 housewives in Daejeon. The average meal time was 20~30 min., 67.6% of respondents ate breakfast and bap with guk(72.9%) was the most favourite foods. Almost half of them ate egg, fruit, vegetable everyday. They concerned highly about less intake of frozen foods(64.2%) and food additives(61.6%) for wellbeing dietary life. Because of close distance and various foods items, big discount store was chosen as food purchase place. The most considering purchase factor was food additives in working housewife and nutrition in housewife(p<0.05). In grocery shopping, working housewife considered children and their husbands(p<0.05). The most important purchase factor was the freshness in vegetables fishes fruits seaweeds eggs. TV or Radio was utilized the most frequently to obtain the useful knowledge on healthy foods. It is suggested that practical information should be offered housewives to purchase proper foods within their income and to manage dietary life according to their family's health condition.