• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.30 no.1
• /
• pp.43-50
• /
• 2024

Background: This study compared orthopedic physiotherapists from different working institutions regarding their health status and burnout syndrome to understand the work-related factors that affect health status and burnout syndrome Methods: This study was conducted from October 28 to November 13, 2022, focusing on physiotherapists working in medical institutions located in metropolitan areas, such as Seoul, Gyeonggi, and Incheon. A total of 591 questionnaires were analyzed. The questionnaire consisted of questions related to the basics of physical therapy, general matters, types of working institutions, health conditions, and burnout syndrome. Results: No significant difference was detected in health self-awareness status whether the working institution was a clinic, nursing hospital, hospital, oriental hospital, general hospital, or university hospital. Among the burnout factors, nursing hospitals showed the highest scores for retirement demands, work unfavorability, physical fatigue, mental fatigue, and reasons for work because of salary. By contrast, university hospitals showed the highest enthusiasm and other institutions showed the lowest enthusiasm for work. In particular, in terms of enthusiasm, scores were significantly more positive in university hospitals than in other institutions. Conclusion: A management plan for burnout for orthopedic manual physiotherapists working in nursing hospitals is needed, and future research will examine the health status of orthopedic manual physiotherapists and work that may affect burnout syndrome. An exploration of management measures, such as health promotion and burnout syndrome prevention, is needed that adds other items, such as differences in environment and differences in the number and disease severity of patients

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.81-84
• /
• 1999

In this study, the influence of specific surface area of cement, substitution ratio of gypsum anhydrite on the physical properties of concrete were investigated by measurements of slump, air content and compressive strength. The results showed that reducing the specific surface area of cement under 3200$\textrm{cm}^2$/g and using 20% of gypsum anhydrite were desirable to prevent the decrease in workability and strength of concrete in summer season.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.6-11
• /
• 1994

For a safety supervision, watching a restricted area so that no one go there is very important. This has been mostly accomplished by people. They keep an eye on many monitors at onece for a long time. It, however, is too simple and boring to concentrate it for a long time. So it's worth while to construct a watching system by image processing. And the system we made is now actually working at a certain hydroelectric power plant and some other restricted areas in Japan.

• Journal of the Korean Home Economics Association
• /
• v.45 no.10
• /
• pp.97-111
• /
• 2007

This study examined the actual conditions of outdoor facilities and evaluated safety evaluations levels in playgrounds based on types of kindergartens. The samples for the survey were 100 kindergartens in Seongnam city Gyeonggi-Do province. Most outdoor facilities consisted of playgrounds with sand area and complex playing equipments, while wood-working area, sensory playing area, and mud playing area were less equipped than other facilities. In the case of outdoor playing facilities there were meaningful environmental differences within kindergartens. The public has less diversity in play areas and equipments and providing safety guidelines in playgrounds than privates. The score for the safety evaluations in the outdoor play environment was higher than average. As the range outdoor playing facilities increased, safety was dually considered, while kindergartens with a higher ratio of child-teacher numbers exhibited less consideration to playground safety.

• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.261-270
• /
• 2002

This study was executed to elucidate the degree of satisfaction with working environment and the factors affecting it for workers who are engaged in the composting plants with livestock manure in the Han-river watershed. As an evaluation on site, we applied the self-administered questionaire including general characteristics, working conditions, degree of satisfaction with working environment, and degree of satisfaction with working condition. Simultaneously, we analysed the exposure levels of odor (ammonia, hydrogen sulfide, and odor intensity) in the boundary area of plants. As a result of the study, health condition, odor, work load, dust, and smoking were proved to be the main factors affecting the degree of satisfaction with working environment for workers who are employed in the composting plants with livestock manure in the Han-river watershed. Of them, it was investigated that health condition, odor, and work load accounted for 61.3% of the total degree of satisfaction with working environment and health condition(p$<$0.01), odor(p$<$0.05), work load(p$<$0.05), and dust(p$<$0.05) were statistically significant. It was concluded that the degree of satisfaction with working environment was high for the workers who had good health status and low for the workers who had the relatively considerable work load and were often exposed to odor and dust. Therefore, to increase the degree of satisfaction with working environment for workers who are engaged in the composting plants with livestock manure, the measures that can reduce the exposure levels of odor and dust emitting from the composting plant with livestock manure should be improved.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.253-260
• /
• 2014

Purpose: This study investigated the harvesting properties of the giant miscanthus (Miscanthus ${\times}$ giganteus) to measure the required mowing power for different stem conditioning methods in order to shorten the drying time after mowing and the bale density so that the crop can be used as biomass in the winter season. Methods: The required mowing power and bale density were measured using a power measurement device, three different mower-conditioners, and a mid-sized round baler under different working speeds and conditioning methods. Results: For the various mower-conditioners, the average stem length from mowing was 0.86-0.91 m, and the available working speed was 1.6 m/s. The steel roller-type mower-conditioner showed better stem conditioning but could not mow over a working speed of 1.6 m/s. The required average power of the mower-conditioners varied from 23.8 kW for the steel roller-type rotary disk mower-conditioner with a working width of 2.4 m to 37.2 kW for the flail-type rotary disk mower-conditioner with a working width of 3.2 m at a working speed of 1.6 m/s. The bale densities were $155.8-172.2kg/m^3$. The highest bale density was measured for stems with no conditioning and a moisture content of 11.3% (d.b.) mowed by the rotary disk mower. The bale density was affected by the mowing method because of the low moisture content of the miscanthus stems. Conclusions: In terms of the working performance and conditioning statue, the steel roller-type mower-conditioner is a better choice at a working width of 2.4 m, while the flail finger-type mower-conditioner is better at a working width of 3.2 m. The type of mower-conditioner used for giant miscanthus harvesting should be determined by considering the harvest area, workable period, and working performance of a mower-conditioner and baler during the winter.

• 대한예방의학회:학술대회논문집
• /
• 1995.10a
• /
• pp.389-390
• /
• 1995

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.183-184
• /
• 2006

• Journal of Arbitration Studies
• /
• v.10 no.1
• /
• pp.3-25
• /
• 2000

At its thirty-second session in 1999, the UNCITRAL had before it the requested note entitled "Possible future work in the area of international commercial arbitration." After concluding the discussion on its future work in the area of international commercial arbitration, it was agreed that the priority items for the working group should be conciliation, requirement of written form for the arbitration and enforceability of interim measures of protection. the Commission entrusted the work to the Working Group on Arbitration which held its thirty-second session at Vienna from 20 to 31 March 2000. The Working Group discussed agenda item 3 on the basis of the report of Secretary General entitled "Possible uniform rules on certain issues concerning settlement of commercial disputes : conciliation, interim measures of protection, written form for arbitration agreement." At its thirty-three session in 2000, the UNCITRAL had before it the report of Secretary General on agenda item 3 discussed by the Working Group. The Working Group discussed the issues relating to certain aspects of conciliation proceedings ; (1) Admissibility of certain evidence in subsequent judicial or arbitral proceedings ; (2) Role of conciliatior in arbitration or court proceedings ; (3) Enforceability of settlement agreements reached in conciliation proceedings ; (4) Other possible items for harmonized treatment : a) Admissibility or desirability of conciliation by arbitrators b) Effect of an agreement to conciliate on judicial or arbitral proceedings c) Effect of conciliation on the running of limitation period d) Communication between the conciliator and parties ; disclosure of information e) Role of conciliator. It was generally considered that decisions as to the form of the text to be prepared should be made at a later stage when the substance of prepared solutions would become clearer. However, it was noted that model legislative provisions seemed to be appropriate form for a number of matters proposed to be discussed in the area conciliation. There was general support in the Working Group for the proposition to perpare a legislative regime governing the enforcement of interim measures of protection ordered by arbitral tribunals. It was generally considered that legislative regime should apply to enforcement of interim measures issued in arbitration taking place in State where enforcement was sought as well as outside that State. It was generally observed that there was a need for provisions which conformed to current practice in international trade with regard to requirements of written form for arbitration agreement. The view was adopted by the Working Group that the objective of ensuring a uniform interpretation of the form requirement that responded to the needs of international trade could be achieved by : preparing a model legislative provision clarifying, for avoidance of doubt, the scope of article 7(2) of the UNCITRAL Model Law on International Commercial Arbitration : and adopting a declaration, resolution or statement addressing the interpretation of the New York Convention that would reflect a broad understanding of the form requirement. There was general agreement in the Working Group that, in order to promote the use of electronic commerce for international trade and leave the parties free to agree to the use of arbitration in the electronic commerce sphere, article II(2) of the New York Convention should be interpreted to cover the use of electronic means of communication as defined un article 2 of the Model Law on Electronic Commerce and that it required no amendment to do that. The UNCITRAL may wish to consider to the desirability of preparing uniform provisions on any of those issues concerning conciliation and arbitration proceedings, possibly indicating whether future work should be towards a legislative text or non-legislative text.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1996

The subject of this study was to analyse overviews of companies which exceed TLV by industry, hazardous factors, and to estimate the numbers of companies measured in 1993 and the implementation rate of working environment measurement by the act of industrial safety and health The result of this study was as follow. 1. The number of cases which exceed TLV was 5,937 companies. In distribution of excess companies by the scale of workers, small scale cases under the 49 workers were 3,150 companies(53.0%) of total cases, medium scale cases between 50 - 299 workers were 2,248 companies(37.9%), and large scale cases over 300 workers were 539 companies(9.1%). By the industry of excess companies, it was marked high rate in manufacture of fabricared metal products(except machinary and equipment), manufacture of textiles of each 1,048 companies(17.7%), and 1,018 companies(17.1%). By the area of excess companies, it was shown high rate in Kyeongki area marked 1,679 companies(28.3%) and Daegu-Kyeongbuk area were marked 1,417 companies (23.9%). By the hazardous factors of excess companies, noise was recorded high rate in 5,160 companies (86.9%), dust was shown in 1,245 companies(21.0%), organic solvent was marked 130 companies(7.9%). The number of excess factors by the company was 1.2. In this result, the more it was bigger scale companies, the more excess factors were much more and the more it was recorded higher rate in noise organic solvent heavy metals, etc. 2. The measured cases in institutes during 1994 were 1,596 companies, and excess cases were 157 companies(9.8%) among them. By the scale of workers, small scale cases under the 49 workers were 190 companies (17.9%) among 1,064 companies, cases of medium scale cases between 50-299 workers were 127 companies (27.9%) among 463 companies, and large scale cases over 300 workers were 31 companies(44.9%) among 69 companies. In this result industry of the highest rate shown was manufacture of basic metals in 20 companies exceeded among 53 companies (37.7%), and was manufacture of pulp, paper production in 14 companies exceeded among 40 companies(35.0%), and the excess rate were high in bigger scale. 3. Companies estimated by the data of excess cases and excess rate in 1993 were 30,474 implementation rate estimated for measurement of working environment was 34.3% of companies in korean industry. In this result, it was comparatively shown of measurement rate for the working environment in manufacture of pulp, paper product, manufacture of machinary and equipment n.e.c., and of high measurement rate and excess rate in manufacture of electrial machinary and apparatus, and manufacture of basic metals.