• 한국잠사곤충학회지
• /
• 제9권
• /
• pp.67-87
• /
• 1969

1. 본 조사는 현재 우리나라에 보존되어 있는 계통을 전부 수집하여 Virus병에 대한 저항성을 계통별로 조사함으로써 잠견생산에 막대한 피해를 주는 Virus병에 대하여 저항성이 강한 계통을 선발하는 동시에 선발된 결과는 앞으로 저항성품종 육성제료로 삼고저 하였다. 2. 가잠의 핵형다각체 Virus병에 대하여 저항성이 강한 계통은 N$_4$, N$_{6}$, N$_{46}$, $C_{85}$, E$_{111}$로써 log ED$_{50}$ 값이 0.799~1.611 범위내에 있으며 강한 계통으로서는 N$_{10}$, $C_{62}$, N$_{70}$, N$_{79}$, $C_{106}$이고 log ED$_{50}$의 값은 5.159~7.258 범위내에 있다(표 4참조) 그러고 일본계통이 가장 강하여 log ED$_{50}$이 3.770이 3.770이고 중국계통의 log ED$_{50}$은 3.564로서 다음이고 가주계통의 log ED$_{50}$이 3.381로서 가장 강한 계통으로 나타났다. 감염율의 회귀방정식의 방향계수는 0.1~0.6범위로서 우리나라 보존계통의 저항성의 균일성이 비교적 작을 경향을 다타냈다. ra계통별 저항성의 유전현상에 대한 해명과 품질육성을 위한 구체적인 응용방법에 관한 구명은 차후의 숙제로 남게 되었다. 3. 잠체의 수분 및 회분과 Virus병에 대한 저항성과는 상관관계가 없었고(표 8참조) 다만 감잠비율(보통 사육법에 의하여 조사된 것)과는 고도의 상관관계가 있다. 즉 4면 기잠에서는 수분 및 회분과는 관계가 없었고 3면 기잠에서는 수분은 +0.326 회분은 +0.326으로서 고도의 유의성을 나타냈고 1면과 2면의 회분에서는 각각 +0.520과 ＋386으로서 고도의 유의성을 나타냈으나 수분에서는 유의성이 없었다(표7 참조). 4. 교배조간에 있어서는 기호 205가 모든 형질에 있어서 가장 우수하였다. 특히 204는 강건성이 매우 좋았으나 견질에 있어서 대조구보다 약간 떨어진다. 기호 212는 견질을 약간 떨어지고 감잠비율은 보통이나 수견량이 공시품종중 가장 많았다(표 11). 5. 종합적으로 기술하면 Virus에 대한 저항성이 강한 상기 몇 계통은 강건성 품종？성을 위한 기초자료가 될것이며 계속 여러 계통외 특성을 조사하여 특성 보존을 위한 품종보존의 완벽을 기하여야겠다.다.

• Journal of Nutrition and Health
• /
• 제42권6호
• /
• pp.536-546
• /
• 2009

울산지역에 거주하는 20대 이상 성인 남녀 412명을 대상으로 건강관련요인, 식습관, 스트레스 점수, 스트레스원인 및 증상 등을 알아보고, 스트레스와 식습관에 영향을 미치는 요인을 살펴봄으로써 건강한 식생활에 도움이 되고자 본 연구를 실시하였으며, 그 결과를 요약하면 다음과 같다. 조사대상자는 남자 188명, 여자 224명으로 구성되었으며, 대학교 재학생이 24.5%, 전업주부 18.9%, 사무직 18.0%, 서비스 판매직 17.0%, 전문직 8.3%의 순으로 나타났으며, 월평균가계수입은 200$\sim$299만원이 전체의 31.1%로 가장 많았다. 82.0%가 핵가족이었으며, 종교가 없는 조사대상자가 전체의 45.1%, 불교 42.5%로 나타났다. 비만도를 살펴보면 정상 54.4%, 저체중 9.7%, 과체중 20.1%, 비만 15.8%로 과체중과 비만군이 비교적 많이 나타났으며, 남자의 경우 과체중과 비만군이 많았으며, 여자의 17.0%가 저체중인 것으로 나타나 성별에 따른 차이를 보였다 (p < 0.001). 전체의 57.0%가 꾸준히 운동을 하고 있었으며 (남자: 61.7%, 여자: 53.1%), 주로 걷기 (43.4%), 헬스 (22.6%), 등산 (11.5%), 수영 (8.9%)의 순이었으며, 남 녀 간에 유의적인 차이를 보였다 (p < 0.001). 하루 평균 1/2$\sim$1시간 정도 운동을 하고 있었으며, 남자가 여자보다 더 많은 시간을 운동에 할애하였다 (p < 0.001). 평균 수면시간은 7시간 미만이 68.2%로 가장 많았으며, 7$\sim$8시간은 29.9%로 나타났다. 건강관심정도는 보통이다 48.5%였으며, 자신이 건강하다는 조사대상자는 34.7%, 보통이다 53.9%로 나타났으며, 전체의 21.6%가 현재 질병이 있다고 응답하였다. 매일 규칙적인 식사를 하는 조사대상자는 55.1%였으며, 여자보다 남자가 더 규칙적이었지만 외식빈도는 남자가 더 높았다. 식생활 중 문제점으로는 폭식이나 과식이 30.1%로 가장 많았으며, 불규칙한 식사시간, 맵고 짠 자극적인 음식 선호의 순으로 나타났다. 음주와 흡연정도에서 남 녀간의 유의적인 차이가 나타났으며 남자의 48.9%, 여자의 5.8%가 흡연을 하고 있었으며 (p < 0.001), 남자의 6.9%, 여자의 34.4%가 전혀 술을 마시지 않는다고 응답하였다 (p < 0.001). 조사대상자들의 스트레스 원인으로는 개인적 요인, 사회적 요인, 가족관계, 신체적요인, 업무나 학업 순이었으며, 스트레스를 받았을 때 주로 신경예민 걱정 근심 불안, 두통, 목이나 어깨 등의 통증, 소화불량, 우울, 불면 등을 호소하였고, 이를 해소하기 위해서 휴식, 음주 흡연, 야외 활동 (여행, 운동), 실내활동 (PC 게임, 영화나 TV감상, 노래부르기) 등의 순으로 나타났다. 스트레스를 받았을 때는 맵고 뜨거운 음식, 술이나 커피 등의 음료, 단음식 등을 선호하였으며, 남 녀 간에 다소 차이를 보였다. 전체의 55.8%가 조금 스트레스를 느낀다고 응답하였으며, 스트레스 점수는 높을수록 스트레스를 많이 받고 있다는 것으로 최고 100점 중 전체 평균 58.3점으로 조사되었다. 각 영역별 점수를 살펴보면 음주와 흡연이 12.8 $\pm$ 4.8점으로 가장 낮게 나타났으며, 정서적 활동 14.0 $\pm$ 2.6점, 식생활 15.2 $\pm$ 3.3점, 육체적 활동 16.4 $\pm$ 4.4점의 순으로 나타났다. 평균 식습관점수는 41.1 $\pm$ 7.1점이었으며, 스트레스 점수 '상'인 그룹 36.8 $\pm$ 6.3점, '중' 40.5 $\pm$ 6.0점, '하' 47.3 $\pm$ 6.4점으로 나타나 스트레스가 높을수록 식습관 점수가 낮은 것으로 유의적인 차이를 보였다 (p < 0.001). 식습관점수 '상'인 그룹의 평균 스트레스 점수는 46.7 $\pm$ 11.8점 '중' 55.0 $\pm$ 9.8점, '하' 63.5 $\pm$ 8.3점으로 식습관 점수가 좋은 '상' 그룹에서 가장 낮은 스트레스 점수를 보였다 (p < 0.001). 스트레스를 받았을 때 식사량 (p < 0.01)이 증가한다는 응답은 전체의 32.0%, 음주량 (p < 0.001)의 증가 44.9%, 흡연량 (p < 0.001)의 증가 22.8%, 신체활동량 (p < 0.001)의 증가 22.8%로 나타났지만, 스트레스 점수가 낮은 '하' 그룹에서는 식사량 (58.1%), 음주량 (45.7%), 흡연량 (90.7%), 신체활동량 (53.5%)이 동일하다는 응답이 가장 많았으며, 식사량이 감소한다는 응답이 23.3%로 나타났다. 연령이 높은 군에서 식습관점수가 유의적으로 높았으며(p < 0.001), 스트레스 점수는 30대, 40대, 20대, 50대의 순으로 증가하여 연령대별로 유의적인 차이를 보여주었다(p < 0.001). 학생, 자영업, 판매영업직에서 낮은 식습관 점수와 높은 스트레스 점수를 보여주었으며 (p < 0.001), 독신가정이고 운동을 하지 않거나 (p < 0.001), 수면시간 (p < 0.05)이 적을수록 스트레스 점수는 높아지고, 식습관 점수는 낮았다. 이상의 연구결과를 볼 때 스트레스를 많이 받을수록 불규칙적이며 자극적인 식사를 선호하고 음주와 흡연을 하는 것으로 나타나 건강에 나쁜 영향을 미칠 것으로 우려된다. 또한 이러한 생활이 반복될 경우 비만을 유발할 수 있으므로 외부의 스트레스로부터 건강을 유지하기 위해 개인의 규칙적인 생활습관과 적절한 영양섭취가 필요하며, 이를 해소하기 위한 운동이나 사회활동 프로그램 등이 필요하다고 하겠다. 따라서 스트레스를 관리하고 비만 등의 질병을 예방하기 위한 건강관리 및 생활습관을 가지기 위한 지속적인 영양교육이 실시되어야 할 것으로 생각된다.

• 조형예술학연구
• /
• 제7권
• /
• pp.64-104
• /
• 2005

Visual media transmits image and information reproduced in large quantities, such as a photography, film, television, video, advertisement, or computer image. Correspondence to the students' reception and recognition of culture in the future. arrangements for the field of studies of visual culture. 'Visual Culture' implies cultural phenomena of visual images via visual media, which includes not only the categories of traditional arts like a painting, sculpture, print, or design, but the performance arts including a fashion show or parade of carnival, and the mass and electronic media like a photography, film, television, video, advertisement, cartoon, animation, or computer image. In the world of visual media, Image' functions as an essential medium of communication. Therefore, people call the culture of today fra of Image Culture', which has been converted from an alphabet convergence era to an image convergence one. Image, via visual media, has become a dominant means for communication in large part of human life, so we can designate an Image' as a typical aspect of visual culture today. Image, as an essential medium of communication, plays an important role in contemporary society. The one way is the conversion of analogue image like an actual picture, photograph, or film into digital one through the digitalization of digital camera or scanner as 'an analogue/digital commutator'. The other is a way of process with a computer drawing, or modeling of objects. It is appropriate to the production of pictorial and surreal images. Digital images, produced by the other, can be divided into the form of Pixel' and form of Vector'. Vector is a line linking the point of departure to the point of end, which organizes informations. Computer stores each line's standard location and correlative locations to one another Digital image shows for more 'Perfectness' than any other visual media. Digital image has been evolving in the diverse aspects, such as a production of geometrical or organic image compositing, interactive art, multimedia art, or web art, which has been applied a computer as an extended trot of painting. Someone often interprets digitalized copy with endless reproduction of original even as an extension of a print. Visual af is no longer a simple activity of representation by a painter or sculptor, but now is intimately associated with a matter of application of media. There is some problem in images via visual media. First, the image via media doesn't reflect a reality as it is, but reflects an artificial manipulated world, that is, a virtual reality. Second, the introduction of digital effect and the development of image processing technology have enhanced a spectacle of destructive and violent scenes. Third, a child intends to recognize the interactive images of computer game and virtual reality as a reality, or truth. Education needs not only to point out an ill effect of mass media and prevent the younger generation from being damaged by it, but also to offer a knowledge and know-how to cope actively with social, cultural circumstances. Visual media education is one of these essential methods for the contemporary and future human being in the overflowing of image informations. The fosterage of 'Visual Literacy' can be considered as a very purpose of visual media education. This is a way to lead an individual to the discerning, active consumer and producer of visual media in life as far as possible. The elements of 'Visual Literacy' can be divided into a faculty of recognition related to the visual media, a faculty of critical reception, a faculty of appropriate application, a faculty of active work and a faculty of creative modeling, which are promoted at the same time by the education of 'visual literacy'. In conclusion, the education of 'Visual Literacy' guides students to comprehend and discriminate the visual image media carefully, or receive them critically, apply them properly, or produce them creatively and voluntarily. Moreover, it leads to an artistic activity by means of new media. This education can be approached and enhanced by the connection and integration with real life. Visual arts and education of them play an important role in the digital era depended on visual communications via image information. Visual me야a of day functions as an essential element both in daily life and in arts. Students can soundly understand visual phenomena of today by means of visual media, and apply it as an expression tool of life culture as well. A new recognition and valuation visual image and media education is required to cultivate the capability of active, upright dealing with the changes of history of civilization. 1) Visual media education helps to cultivate a sensibility for images, which reacts to and deals with the circumstances. 2) It helps students to comprehend the contemporary arts and culture via new media. 3) It supplies a chance of students' experiencing a visual modeling by means of new media. 4) There are educational opportunities of images with temporality and spaciality, and therefore a discerning person becomes to increase. 5) The modeling activity via new media leads students to be continuously interested in the school and production of plastic arts. 6) It raises the ability of visual communications dealing with image information society. 7) An education of digital image is significant in respect of cultivation of man of talent for the future society of image information as well. To correspond to the changing and developing social, cultural circumstances, and the form and recognition of students' reception of them, visual arts education must arrange the field of studying on a new visual culture. Besides, a program needs to be developed, which is in more systematic and active level in relation to visual media education. Educational contents should be extended to the media for visual images, that is, photography, film, television, video, computer graphic, animation, music video, computer game and multimedia. Every media must be separately approached, because they maintain the modes and peculiarities of their own according to the conveyance form of message. The concrete and systematic method of teaching and the quality of education must be researched and developed, centering around the development of a course of study. Teacher's foundational capability of teaching should be cultivated for the visual media education. In this case, it must be paid attention to the fact that a technological level of media is considered as a secondary. Because school education doesn't intend to train expert and skillful producers, but intends to lay stress on the essential aesthetic one with visual media under the social and cultural context, in respect of a consumer including a man of culture.

• 한국수산과학회지
• /
• 제18권5호
• /
• pp.447-454
• /
• 1985

양식 잉어의 품질을 지질성분면에서 평가하기 위하여 천연 및 양식 잉어의 지질 조성 및 이들 지질의 구성지방산을 분석${\cdot}$비교하였고, 이스라엘 잉어의 지질성분과도 비교하였다. 또 양식 잉어 및 이스라엘 잉어의 지방산과 사료 지방산을 분석${\cdot}$비교한 결과는 다음과 같다. 1. 총지질 함량은 양식 잉어가 천연 잉어보다는 약간 낮은 반면 이스라엘 잉어와는 거의 비슷하였다. 부위별로는 천연 및 양식 잉어는 내장부가 가식부보다 총지질이 2배 이상 높았으나, 이스라엘 잉어는 가식부와 내장부가 거의 비슷하였다. 2. 천연 및 양식 잉어와 이스라엘 잉어의 지질 조성은 거의 비슷한 경향을 나타내고 있었다. 즉 중성지질이 대부분을 차지하고 당지질과 인지질은 아주 적었다. 또 부위별 지질 조성을 비교해 보면 중성지질의 함량은 천연 잉어의 경우는 내장부가 가식부보다 많은 반면 양식 잉어와 이스라엘 잉어는 그 반대였다. 가식부의 당지질과 인지질 함량은 양식 잉어의 경우는 당지질이 인지질보다 많은 반면 이스라엘 잉어는 인지질이 당지질보다 많았다. 또 중성지질은 TG의 함량이 가장 많았으며 인지질은 PC와 PE가 가장 많았다. 3. 가식부의 중성지질의 중요 구성지방산 함량은 $C_{18:1},\;C_{18:2},\;C_{18:3},\;C_{22:5},\;C_{22:6}$산은 양식 잉어가 천연 잉어보다 높은 반면, $C_{16:0},\;C_{18:0},\;C_{16:1},\;C_{20:4},\;C_{20:5}$산은 천연 잉어가 양식 잉어보다 높았다. 이스라엘잉어의 경우에는 $C_{18:2}$산의 함량이 천연 및 양식 잉어에 비해 상당히 높게 나타났다. 인지질의 경우는 $C_{18:0},\;C_{18:1},\;C_{18:2},\;C_{18:3},\;_C{22:6}$산은 양식산이 천연산보다 많은 반면 $C_{16:0},\;C_{16:1},\;C_{20:4},\;C_{20:5},\;C_{22:5}$산은 천연산이 양식산보다 높았다. 4. 중성지질의 불포화도(TUFA/TSFA)는 양식산이 천연산보다 약간 높았으며, 또 이스라엘 잉어는 양식 잉어보다도 약간 더 높았다. 인지질의 경우도 이스라엘 잉어>양식 잉어>천연 잉어의 순이었다. 필수지방산 함량(TEFA)은 중성지질의 경우 가식부는 양식 잉어가 천연 잉어보다 높은 반면 내장부는 천연 잉어가 양식 잉어보다 높았다. 인지질의 경우는 가식부에서 이스라엘 잉어가 천연 및 양식 잉어보다 약간 더 높고, 또 천연 잉어가 양식 잉어보다 높았다. 5. w3고도불포화지방산 함량 (w3 HUFA)은 중성지질의 경우는 필수지방산 함량의 경향과 거의 비슷하였고 인지질의 경우는 이스라엘 잉어가 가장 높고, 양식 잉어, 천연 잉어의 순이었다. 6. 사료 지방산(C)에 대한 양식 잉어의 지방산(A)의 비(A/C) 및 이스라엘 잉어의 지방산(B)의 비(B/C)를 비교하여 보면 양식 잉어는 $C_{20:5}\;w3(0.12),\;C_{22:5}\;w6(0.53),\;C_{22:5}\;w3(0.68),\;C_{22:6}\;w3(0.26)$산이 아주 낮았고, 이스라엘 잉어는 $C_{18:3}\;w3(0.61),\;C_{20:5}\;w3(0.11),\;C_{22:4}\;w6(0.16),\;C_{22:5}\;w6(0.07),\;C_{22:6}\;w3(1.53)$산이 아주 낮게 나타났다. 따라서 주로 이들 w3고도불포화지방산들이 polyene산의 생합성 및 성장률에 깊이 관계할 가능성이 있다고 판단되었다.

• Asia pacific journal of information systems
• /
• 제21권2호
• /
• pp.89-116
• /
• 2011

In collaborative tagging systems such as Delicious.com and Flickr.com, users assign keywords or tags to their uploaded resources, such as bookmarks and pictures, for their future use or sharing purposes. The collection of resources and tags generated by a user is called a personomy, and the collection of all personomies constitutes the folksonomy. The most significant need of the folksonomy users Is to efficiently find useful resources or experts on specific topics. An excellent ranking algorithm would assign higher ranking to more useful resources or experts. What resources are considered useful In a folksonomic system? Does a standard superior to frequency or freshness exist? The resource recommended by more users with mere expertise should be worthy of attention. This ranking paradigm can be implemented through a graph-based ranking algorithm. Two well-known representatives of such a paradigm are Page Rank by Google and HITS(Hypertext Induced Topic Selection) by Kleinberg. Both Page Rank and HITS assign a higher evaluation score to pages linked to more higher-scored pages. HITS differs from PageRank in that it utilizes two kinds of scores: authority and hub scores. The ranking objects of these pages are limited to Web pages, whereas the ranking objects of a folksonomic system are somewhat heterogeneous(i.e., users, resources, and tags). Therefore, uniform application of the voting notion of PageRank and HITS based on the links to a folksonomy would be unreasonable, In a folksonomic system, each link corresponding to a property can have an opposite direction, depending on whether the property is an active or a passive voice. The current research stems from the Idea that a graph-based ranking algorithm could be applied to the folksonomic system using the concept of mutual Interactions between entitles, rather than the voting notion of PageRank or HITS. The concept of mutual interactions, proposed for ranking the Semantic Web resources, enables the calculation of importance scores of various resources unaffected by link directions. The weights of a property representing the mutual interaction between classes are assigned depending on the relative significance of the property to the resource importance of each class. This class-oriented approach is based on the fact that, in the Semantic Web, there are many heterogeneous classes; thus, applying a different appraisal standard for each class is more reasonable. This is similar to the evaluation method of humans, where different items are assigned specific weights, which are then summed up to determine the weighted average. We can check for missing properties more easily with this approach than with other predicate-oriented approaches. A user of a tagging system usually assigns more than one tags to the same resource, and there can be more than one tags with the same subjectivity and objectivity. In the case that many users assign similar tags to the same resource, grading the users differently depending on the assignment order becomes necessary. This idea comes from the studies in psychology wherein expertise involves the ability to select the most relevant information for achieving a goal. An expert should be someone who not only has a large collection of documents annotated with a particular tag, but also tends to add documents of high quality to his/her collections. Such documents are identified by the number, as well as the expertise, of users who have the same documents in their collections. In other words, there is a relationship of mutual reinforcement between the expertise of a user and the quality of a document. In addition, there is a need to rank entities related more closely to a certain entity. Considering the property of social media that ensures the popularity of a topic is temporary, recent data should have more weight than old data. We propose a comprehensive folksonomy ranking framework in which all these considerations are dealt with and that can be easily customized to each folksonomy site for ranking purposes. To examine the validity of our ranking algorithm and show the mechanism of adjusting property, time, and expertise weights, we first use a dataset designed for analyzing the effect of each ranking factor independently. We then show the ranking results of a real folksonomy site, with the ranking factors combined. Because the ground truth of a given dataset is not known when it comes to ranking, we inject simulated data whose ranking results can be predicted into the real dataset and compare the ranking results of our algorithm with that of a previous HITS-based algorithm. Our semantic ranking algorithm based on the concept of mutual interaction seems to be preferable to the HITS-based algorithm as a flexible folksonomy ranking framework. Some concrete points of difference are as follows. First, with the time concept applied to the property weights, our algorithm shows superior performance in lowering the scores of older data and raising the scores of newer data. Second, applying the time concept to the expertise weights, as well as to the property weights, our algorithm controls the conflicting influence of expertise weights and enhances overall consistency of time-valued ranking. The expertise weights of the previous study can act as an obstacle to the time-valued ranking because the number of followers increases as time goes on. Third, many new properties and classes can be included in our framework. The previous HITS-based algorithm, based on the voting notion, loses ground in the situation where the domain consists of more than two classes, or where other important properties, such as "sent through twitter" or "registered as a friend," are added to the domain. Forth, there is a big difference in the calculation time and memory use between the two kinds of algorithms. While the matrix multiplication of two matrices, has to be executed twice for the previous HITS-based algorithm, this is unnecessary with our algorithm. In our ranking framework, various folksonomy ranking policies can be expressed with the ranking factors combined and our approach can work, even if the folksonomy site is not implemented with Semantic Web languages. Above all, the time weight proposed in this paper will be applicable to various domains, including social media, where time value is considered important.

• Radiation Oncology Journal
• /
• 제23권4호
• /
• pp.223-229
• /
• 2005

목적: 근접방사선 치료시 직장내 선량측정은 치료간(Inter-fraction) 직장의 형태가 변화하므로 측정의 재현성을 이룰 수 없다. 본 연구에서는 근접방사선치료용 다목적 팬톰(Multi Purpose Brachytherapy Phantom, MPBP)을 제작하여 치료 시와 동일한 조건을 재현하였고 이때 측정한 선량 값을 직장의 부작용을 줄이기 위해 선량최적화에 적용하고자 하였다. 대상 및 방법: 자궁경부암 근접방사선 치료 시 탄뎀(tandem)과 난형체(ovoid)를 사용한 환자 4명을 대상으로 다이오드 검출기를 이용하여 직장표시 기준점 R1에서 선량측정을 시행하였다. 환자 당 5회씩 총 20회 직장선량을 측정하였다. 그리고 반복 측정 시 다이오드 검출기의 설정 변화(set up variation)를 분석하였다. 그리고 자체 제작된 근접방사선치료용 다목적 팬톰에서 MFA (Multi Function Applicator)를 이용하여 치료 시와 동일한 조건을 재현한 후 열형광선량계(TLD)를 이용하여 직장 표시 기준점 좌표 위치에서 선량을 측정하였다. 결과: 직장 내 다이오드 검출기의 측정 결과 설정 변화는 환자 1의 경우에 Y방향에서 최고 $11.25{\pm}0.95mm$보였고, 환자 2와 3은 Z 방향에서 각각 $9.90{\pm}4.50mm$와 $20.85{\pm}4.50mm$를 나타냈다. 그리고 환자 4는 Z 방향에서 $19.15{\pm}3.33mm$의 변화를 나타내었다. 또한 다이오드 검출기 위치에 따른 평균선량 값은 $122.82{\pm}7.96cGy{\sim}323.78{\pm}11.16cGy$로 나타났다. MPBP에서 TLD의 측정 결과는 직장 표시 기준점(R1)에서 환자1과 4는 상대오차가 각각 최고 8.6%와 7.7%를 보였고, 환자2와 3은 각각 1.7%와 1.2%의 오차를 보였다. 그리고 R과 R2에서 측정한 선량 값들은 환자 2의 R 지점을 제외하고 계산값과 비교하여 $1.7{\sim}8.6%$ 높은 값을 나타냈다. 그리고 반복측정으로 인한 위치변화와 그에 따른 선량 값의 변화는 분석하지 않았다. 계산 값과 측정값의 상대오차가 미국의학물리학회 보고서에서 권고한 15% 내에서 잘 일치하는 것으로 분석되었다. 결론: 자체 제작된 근접치료용 다목적 팬톰(MPBP)은 치료 시와 동일한 조건에서 선량측정의 재현성을 이룰 수 있었고, 직장의 기준점에서 선량을 정확히 분석할 수 있었다. 또한 팬톰에서 측정한 데이터를 이용하여 직장의 부작용을 줄이기 위해 치료 전 선량 최적화를 이루는데 충분한 자료로 활용할 수 있다고 판단되었다.

• Radiation Oncology Journal
• /
• 제26권2호
• /
• pp.104-112
• /
• 2008

목적: 기존치료에 반응하지 않는 다발성 간전이를 동반한 대장암 환자에서 방사선치료와 병합한 수지상세포 면역치료의 독성과 반응도를 조사하였다. 대상 및 방법: 2004년 5월부터 2006년 11월까지 다발성 간전이가 동반된 대장암 환자들 중에서 항암화학 요법에 반응하지 않은 환자 중 지원자를 대상으로 연구를 시행하였다. 본 임상 시험에 대하여 동아대학교병원과 부산대학교병원의 임상윤리심의위원회의 허가를 획득하였고, 동의서에 서명한 환자들을 임상 시험의 대상으로 등록하였다. 환자의 말초 혈액으로부터 수지상세포를 추출하여 배양하였다. 임상시험 일자에 맞추어서 $6{\times}10^6$개의 수지상세포를 바이알(0.5 ml)에 넣어서 디씨백/아이알 주사를 만들었다. 수지상세포 면역치료는 2주 간격으로 간전이암조직에 3회 주사하고, 5주에 내약성 평가를 하였다. 내약성 평가를 통과한 환자에게는 8주에 4번째 수지상세포 면역치료를 하였다. 병의 악화가 없거나 임상시험에 대한 환자의 동의 철회가 없는 경우에는 5, 6번째 수지상세포 면역치료를 각각 12, 16주에 시행하였다. 방사선치료는 수지상세포 면역치료를 주사할 간전이암 부위에 주사하기 전일 및 당일에 4 Gy씩을 조사하였다. 내약성 평가는 $3{\times}10^6$개의 수지상세포로부터 시작하여, $12{\times}10^6$개의 수지상세포까지 시행하였다. 내약성 평가의 최대 내성 용량으로 추가 임상시험을 하였다. 수지상세포 면역치료 주사를 맞은 모든 환자들에서 안전성 평가를 하였다. 4회 이상 주사를 맞은 환자들을 대상으로 10주에 치료 반응을 평가하여 유효성을 조사하였다. 결과: 임상시험에 등록한 24명 중 22명에서 수지상세포 면역치료를 시행하였다. 내성약 평가에는 14명이 등록하여 11명에서 평가를 완료하였다. 시험약과의 관련성이 있을 것으로 생각되는 grade 3 이상의 약물반응으로 인한 이상반응은 없었다. $12{\times}10^6$개의 수지상세포를 내성용량으로 확인하였고, 내성용량인 $12{\times}10^6$개 수지상세포 면역치료를 이용하여 8명에서 추가로 시험을 하였다. 치료에 대한 환자들의 내성은 양호하였고, grade 3을 초과하는 치명적인 부작용은 발생되지 않았다. 4회 이상의 수지상세포 면역치료 주사를 받은 환자가 17명이었고, 이 중의 15명에서는 종양의 반응도 평가가 이루어졌다. 본 연구의 목적은 안전성 평가이지만, 면역치료의 유효성 평가를 위해, 방사선치료와 수지상세포 면역치료 주사가 시행된 부위 외의 간전이암에서 반응도를 조사 하였다. 면역치료의 반응은 평가가 이루어진 환자들에서 정지성 병변이 4명, 진행성 병변이 11명 이었다. 결론: 수지상세포 면역치료와 병행한 방사선치료는 이론적으로 국소 및 전신 제어에 상승효과가 있을 것으로 기대할 수 있다. 하지만 기존 치료에 반응하지 않는 매우 진행된 직장암 환자들을 대상으로 한 본 연구에서는 방사선 치료와 병합한 수지상세포 면역치료로 인한 심각한 부작용의 발생은 없었다는 결과와 4예에서의 정지성 병변의 관찰을 보고한다. 수지상세포의 최대 투여 용량, 적절한 투여 방법, 적절한 방사선의 양, 방사선과 수지상 세포의 적절한 투여 간격 등에 관한 추가 연구를 통하여, 향후 제 2상, 3상 시험으로서의 진행 여부에 긍정적인 결과를 얻을 수 있다고 판단한다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• 대한한의학원전학회지
• /
• 제9권
• /
• pp.555-652
• /
• 1996

Up to the present the scholastic achievements in the history of the medical system have been rather scare despite its importance in the Korean History. Hence, this dissertation attempts to examine the significance of the institute in the Korean History, covering the period from the ancient times through the early Chosun-Dynasty. In the ancient times, the medical practice relied primarily upon human instincts and experiences at the same time, shaman's incantations were widely believed to cure diseases, the workings of evil spirits supposedly. For the period from the Old Chosun through Samhan(巫堂), Chinese refugees brought a long medical knowledge and skills of the continent. New Chinese medicine, traditional practices and incantations were generally used at this time. Medicine and the medical system were arranged by the period of the Three Countries(三國時代). No definite record concerning Koguryo remains now. As for Paekje, however, history shows that they set up the system under the Chinese influence, assigning medical posts such as Euibaksa(medical doctor), Chaeyaksa(pharmacist), and Jukeumsa(medicine man) within Yakbu(department of medicine). Scientifically advanced, they sent experts to Japan, giving a tremendous influence on the development of the science on ancient Japan. After the unification of the three countries, Shilla had their own system after the model of Dang(唐). This system of the Unified Shilla was continued down to Koryo and became the backbone of the future ones. In the ancient time religion and medicine were closely related. The curative function of the shaman was absolute. Buddhism played a notable part in medical practice, too, producing numerous medical monks. The medical system of Koryo followed the model of Dang with some borrowings from Song(宋). Sangyakkuk(尙藥局) was to deal exclusively with the diseases of the monarch whereas Taeeuigam(太醫監) was the central office to handle the national medical administration and the qualification test and education for doctors. In addition, Dongsodaebiwon(東西大悲院), Jewibo(濟危寶), and Hyeminkuk(惠民局) were public hospitals for the people, and a few aristocrats practiced medicine privately. In 987, the 6th year of Songjong(成宗), local medical operations were installed for curing the sick and educating medical students. Later Hyonjong(顯宗), established Yakjom(clinics, 藥店) throughout the country and officials were sent there to see patients. Foreign experts, mainly from Song, were invited frequently to deliver their advanced technology, and contributed to the great progress of the science in Korea. Medical officials were equipped with better land and salary than others, enjoying appropriate social respect. Koryo exchanged doctors, medicine and books mainly with Song, but also had substantial interrelations with Yuan(元), Ming(明), Kitan(契丹), Yojin(女眞), and Japan. Among them, however, Song was most influential to the development of medicine in Koryo. During Koryo Dynasty Buddhism, the national religion at the time, exercised bigger effect on medicine than in any other period. By conducting national ceremonies and public rituals to cure diseases, Taoism also affected the way people regarded illness. Curative shamanism was still in practice as well. These religious practices, however, were now engaged only when medication was already in use or when medicine could not held not help any more. The advanced medical system of Koryo were handed down to Chosun and served the basis for further progress. Hence, then played well the role to connect the ancient medicine and the modern one. The early Chosun followed and systemized the scientific and technical achievement in medicine during the Koryo Dynasty, and furthermore, founded the basis of the future developments. Especially the 70 years approximately from the reign of Sejong(世宗) to that of Songjong(成宗) withnessed a termendous progress in the field with the reestablishment of the medical system. The functions of the three medical institute Naeeuiwon(內醫院), Joneuigam(典醫監), Hyeminkuk(惠民局) were expanded. The second, particualy, not only systemized all the medical practices of the whole nation, but also grew and distributed domestic medicaments which had been continually developed since the late Koryo period. In addition, Hyeminso(惠民局, Hwarinwon(活人院)) and Jesaenwon(濟生院)(later merged to the first) played certain parts in the curing illness. Despite the active medical education in the capital and the country, the results were not substantial, for the aristocracy avoided the profession due to the social prejudice against technicians including medical docotors. During the early Chosun-Dynasty, the science was divided into Chimgueui (acupuncturist), Naryogeui(specialist in scrofula) and Chijongeui (specialist in boil). For the textbooks, those for the qualification exam were used, including several written by the natives. With the introduction on Neoconfucianism(性理學) which reinforced sexual segregation, female doctors appeared for the female patients who refused to be seen by male doctors. This system first appeared in 1406, the sixth year of Taejong(太宗), but finally set up during the reign of Sejong. As slaves to the offices, the lowest class, female doctors drew no respect. However, this is still significant in the aspect of women's participation in society. They were precedents of midwives. Medical officials were selected through the civil exam and a special test. Those who passed exams were given temporary jobs and took permanent posts later. At that time the test score, the work experience and the performance record of the prospective doctor were all taken into consideration, for it was a specialized office. Most doctors were given posts that changed every six months, and therefore had fewer chances for a goverment office than the aristocracy. At the beginning the social status of those in medicine was not that low, but with the prejudice gradully rising among the aristocracy, it became generally agreed to belong to the upper-middle technician class. Dealing with life, however, they received social respect and courtesy from the public. Sometimes they collected wealth with their skills. They kept improving techniques and finally came to take an important share in modernization process during the late Chosun-Dynasty.