• Korean journal of food and cookery science
• /
• v.15 no.1
• /
• pp.8-15
• /
• 1999

The purposes of this study were to estimate the work measurement by the work sampling methodology. The results of the study were summarized as follows; The percentage of labor activities based on the analysis of work sampling were as follows; 1) In the A welfare facilities for the elderly, direct work function, indirect work function and delay were 68.28%, 8.73%, 22.99%, respectively. 2) In the B welfare facilities for the elderly, direct work function, indirect work function and delay were 70.04%, 9.42%, 20.54%, respectively.

• Journal of Surface Science and Engineering
• /
• v.51 no.3
• /
• pp.185-190
• /
• 2018

Dopant-free silicon heterojunction solar cells using Transition Metal Oxide(TMO) such as Molybdenum Oxide($MoO_X$) and Vanadium Oxide($V_2O_X$) have been focused on to increase the work function of TMO in order to maximize the work function difference between TMO and n-Si for a high-efficiency solar cell. One another way to increase the work function difference is to control the silicon wafer resistivity. In this paper, dopant-free silicon heterojunction solar cells were fabricated using the wafer with the various resistivity and analyzed to understand the effect of n-Si work function. As a result, it is shown that the high passivation and junction quality when $V_2O_X$ deposited on the wafer with low work function compared to the high work function wafer, inducing the increase of higher collection probability, especially at long wavelength region. the solar cell efficiency of 15.28% was measured in low work function wafer, which is 34% higher value than the high work function solar cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.721-723
• /
• 2007

Commercial conductive metal inks are available, but metals used in these have unsuitable work function for efficient OLED device performance. Metals with low work function tend to oxidize easily, which makes it challenging to develop low work function metal inks. In this research we describe printed low work function Al cathode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1706-1707
• /
• 2007

A possibility of work function engineering on ZnO thin film is studied by in-situ and ex-situ doping process. The work function of ZnO thin film decreases with increasing boron and phosphorus doping quantity. But, the work function of Al-doped ZnO (AZO) thin film increases as the boron doping quantity incresess. The range of work function change on ZnO thin films is 3.5 eV to 5.5 eV. This result shows that the work function of ZnO thin film is indeed engineerable by changing materials of dopants and their compositional distribution of surface. We also discuss the possible mechanism of work function engineering on ZnO thin films.

• Resources Recycling
• /
• v.11 no.3
• /
• pp.37-45
• /
• 2002

Triboelectrostatic Separation procese is a technology that different particles charged after contact and rubbing different materials are separated in an electric field. At this time, charged polarity of different materials depends on their own work function. Therefore this study discovers work functions of various plastics and determines charging characteristics for the specific optimum operation condition. The experiment is conducted with two sample sets composed of various different plastics. Each sample is charged by contact and rubbing different materials. Surface charge of charged particles is measured by Faraday Cage. The specific work function of an each plastic is driven by measured charging amount and charged particles are separated in a certain electric field ($\pm$20 kV). At last, the relationship between charging amount and separation efficiency is induced by the separation experiment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.563-567
• /
• 2006

Indium tin oxide (ITO) used as an electrode in organic light emitting diodes (OLEDs) and organic thin film transistors (OTFTs) was modified by a self-assembled monolayer (SAM). For device fabrication, surface of the ITO was modified by immersion in a solution including various phosphonic acid at room temperature in order to increase work function of an electrode. The work function of ITO with SAM was measured by Kelvin probe. Work function increase of 0.88 eV was observed in ITO with various SAM. Therefore, ohmic contact is achieved in an interface between ITO and organic semiconductors (pentacene). We analyzed the origin of work function increase of ITO with SAM by X-ray photoelectron spectroscopy. We confirmed that increase of oxygen bonding energy attributed to increase the work function of ITO. These results suggested that ITO with the SAM gives a high possibility for high performance of OLEDS and OTFTs.

• Journal of Nutrition and Health
• /
• v.26 no.4
• /
• pp.443-454
• /
• 1993

The purposes of this study were to analyze the work patterns of selected hospital foodservices by Work Sampling methodology, and to investigate the relationship among operational factors affecting productivity. The hospitals were classified into 3 groups by the percentage of patient meals, and the percentage of special patient diet, and the menu items of patients meals. The groups clustered were characterized by productivity. Work Sampling methodology was utilized to analyze the work patterns of hospitals with selected 3 hospitals to investigate the productivity the productivity and labor times used in each work functions. Productivity index analyzed by Work Sampling were 10.36 min/meal, 10.95 min/meal, and 12.19 min/meal, respectively X, Y, Z hospital. Z hospital was significantly different from time used in direct work function and delay. Direct work function time was the highest, delay the lowest in Z hospital. The relation between the results of Work Sampling and the productivities of 3 groups showed not by delay but direct work function in the classification used in this study.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.198.2-198.2
• /
• 2014

We investigated change of the electronic structure, chemical states and elements ratio in graphene film by using photoelectron spectroscopy (PES). The graphene electrode has attracted considerable interest due to its possible applications in flexible organic light emitting diodes (F-OLEDs). However, to use the graphene for OLEDs, sufficient increase of work function is required, that is related with hole injection barrier. Plasma treatment is one of the most widely used method in OLEDs to increase the work function of the anode such as indium tin oxide (ITO). In this work, we used the plasma treatment, which is generated by various gas types such as O2, and Ar to increase the work function of the graphene film. From these results, we discuss the relation among the change of work function, plasma power, plasma treatment time and gas types.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.63-63
• /
• 2010

Using both experimental and theoretical approaches, we have investigated the adsorption properties of an organic molecule (HATCN), which is used in OLEDs as an efficient hole injection layer, on metal and inert surfaces. We have also studied the structural and electronic properties of such interfaces and the dependences on deposition thickness. We have observed different trends in work function changes with different surfaces. Our photoelectron spectroscopic measurements have revealed an abnormal phenomenon in HATCN on a metal (Cu) surface: the work function decreases at lower coverage (~monolayer) of HATCN on a metal (Cu) surface, but it increases back and becomes higher than that of a bare Cu surface at higher coverage. It has, on the contrary, been observed that the work function of graphene surface just increases as the HATCN coverage increases. Our first-principles density functional calculations has not only verified our experimental observations, but also disclosed the underlying mechanism of such abnormal and different work function behaviors. We have found that the change in work function results from mutual polarization induced by the geometrical deformation and the bond dipole formed at the interface due to the charge redistribution. At low coverage of HAT-CN on Cu substrate, the former reduces the work function significantly by pulling down the vacuum level, while the latter tends to push up the vacuum level resulting in the work function increase.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.78-82
• /
• 1992

The changes in work function due to hydrogen and deuterium adsorption on W(123) plane are measured by means of Field Emission Method. In the case of hydrogen or deuterium adsorption, work function of W(123) plane at 78 K increase and after a maxium value, it decrease and saturated as increasing coverage. After annealing the tungsten emission tip at 200 K, the coverage corresponding to maximum change in work function was shifted toward low coverage and the effect of work function by terraces or steps of which orientation is [ O l l ] was observed.