• Journal of Internet Computing and Services
• /
• v.6 no.2
• /
• pp.141-152
• /
• 2005

Many organizations have been recognizing the necessity of workflow automation technologies according to the rapid expansion of business process oriented applications, such as enterprise resource pianning, customer relationship management, electronic approval management, and so on, Thus, they have started adopting workflow management systems as an essential technological solution for their workflow processes, However, we need some technological extensions and improvements on them in order to accommodate a new type of workflow processes, which is called cross-organizational global workflow processes that require a certain level of collaborations between the organizations engaged in the global workflow processes, Fragment-driven workflow modeling methodology is a Bottom-Up methodology composing a global workflow by defining each organization's own activities, which is called a fragment through a realtime cooperative system. The approach is able to not only simplify the modeling work but also keep each organization's independence in modeling a global workflow, In this paper, we describe the fragment-driven workflow modeling methodology and realize the methodology through the implementation of a cooperative swimlane workflow modeling system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.54-63
• /
• 2006

This work proposes a 14b 100MS/s 0.18um CMOS ADC with optimized resolution, conversion speed, die area, and power dissipation to obtain the performance required in the fourth-generation mobile communication systems. The 3-stage pipeline ADC, whose optimized architecture is analyzed and verified with behavioral model simulations, employs a wide-band low-noise SHA to achieve a 14b level ENOB at the Nyquist input frequency, 3-D fully symmetric layout techniques to minimize capacitor mismatch in two MDACs, and a back-end 6b flash ADC based on open-loop offset sampling and interpolation to obtain 6b accuracy and small chip area at 100MS/s. The prototype ADC implemented in a 0.18um CMOS process shows the measured DNL and INL of maximum 1.03LSB and 5.47LSB, respectively. The ADC demonstrates a maximum SNDR and SFDR of 59dB and 72dB, respectively, and a power consumption of 145mW at 100MS/s and 1.8V. The occupied active die area is $3.4mm^2$.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.78-88
• /
• 2016

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In design phase, especially, collaboration based on BIM system has being a key factor for successful next generation building project. Through the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. In various industrial fields, cloud computing technology is utilized as a promising solution which can reduce time and cost of hardware infrastructure. Among the cloud computing technology, VDI is receiving a great deal of attention from it market as an essential part cloud computing. VDI enables to host multiple individual virtual machines by using hypervisor. It has an advantage to easy main device management. Therefore, this study implements a step-by-step user's DaaS by analyzing the desktop resource data of the workers from Pre-design phase to Schematic design, Design develop and Construction design phase. It also develops BIM environment based on test of BIM modeler and designers in architectural design firm. The goal of the study is to enable the cloud computing BIM server. It provides cost saving, high-performance quality of working environment and cooperation's convenience and high security when doing BIM work in small and medium sized architectural design firm.

• Journal of Families and Better Life
• /
• v.29 no.3
• /
• pp.23-41
• /
• 2011

The purpose of this study is to explore social supports for elderly housing and their residential lives in small cities along rural counties of the United States and Canada, and suggest future implications for age-concentrated rural villages in Korea. In this study, five small and medium cities in non-metropolitan counties of California and Ontario province were visited and elderly residents and service experts were interviewed about their perceptions of community integrated social support networks for senior residences. The senior housing complexes were built due to influx of both metropolitan and rural residents seeking warm localities, traffic connections, business purposes in active production areas. and leisure attractions. There are five main social support networks for senior housing issues in these areas. First, the areas are claimed for senior zones and accordingly health industries are encouraged by local authorities. Second, the community is homogeneously constructed as a senior friendly environment and include features such as an RV park and mobile cottages. Third, senior-helping seniors are offered active work through golf-cluster active retirement communities. Fourth, traditional theme production camps are mobilized by the elderly workers. Lastly, an information system is maintained for screening volunteers and for senior abuse prevention. On the other hand, residential lives are occasionally negatively influenced by unbalanced concentrations of elderly facilities such as nursing stations and funeral homes. For the future of Korean rural elderly policies, suggestions are made as follows: first, an integrated urban and rural township that contains attractive places for early retiring people who seek a warm atmosphere in later life needs to be constructed. Second, an integrated model retirement village of urban and rural retirement life needs to be initiated as a measure of evaluating the adaptation process of movers in senior concentrated zones. Third, a cooperation system among governmental ministries needs to be formed with the long- term goal of establishing a traditional rural town of independent housing districts and medical facilities in rural areas. Fourth, productive and active lifestyles need to be maintained as the local community and government develop successful retirement rural villages, by limiting the expansion of nursing related facilities. Finally, generation integrated visiting welfare programs and services need to be further developed for the housing areas especially in the winter, when social integration and activity are relatively low.

• Journal of the Korean earth science society
• /
• v.27 no.3
• /
• pp.279-288
• /
• 2006

We incorporated cooperative learning focusing on the 'Crustal Deformation' in five classes of second grade students, at an all-girls' middle school of Gimje city. The groups of cooperative learning were composed of four members of students each, according to the heterogeneous level. We conducted a pretest on the students' preference before incorporating the cooperative learning. After ten weeks of cooperative school work, the students took a post test with the same questions as the pretest. The result of this method greatly impacted the change on the students' scientific preference. It means that the students showed a positive change in their awareness of and participation in science classes, compared to before. However it is difficult to distinguish the differences in their scientific attitude on the recognition about scientists and habits which make them think scientifically. This resulted from the short period of ten weeks which is not sufficient to carry out the study strategy effectively. Surveys of the students on cooperative learning indicates that the middle level students prefer this method unlike the higher or lower level students. we are convinced that they can learn from the students of higher level and are able to help the lower level with the interaction through cooperative learning. According to the result of the survey, the method has some weaknesses; it arouses the high noise levels and consequent disturbance due to verbal interaction and of conflicts due to disagreements when they discuss the process. On the contrary, advantages are developing the students's interest in science class, helping them to learn, creating positive participation in class, and fostering mutual collaboration with other students through cooperative learning.

• Journal of Korea Game Society
• /
• v.7 no.2
• /
• pp.83-90
• /
• 2007

One result of the trend towards globalization is an increased number of projects that focus on natural language processing. Automatic speech recognition (ASR) technologies, for example, hold great promise in facilitating global communications and collaborations. Unfortunately, to date, most research projects focus on single widely spoken languages. Therefore, the cost to adapt a particular ASR tool for use with other languages is often prohibitive. This work takes a more general approach. We propose an International Phoneticizing Engine (IPE) that interprets input files supplied in our Phonetic Language Identity (PLI) format to build a dictionary. IPE is language independent and rule based. It operates by decomposing the dictionary creation process into a set of well-defined steps. These steps reduce rule conflicts, allow for rule creation by people without linguistics training, and optimize run-time efficiency. Dictionaries created by the IPE can be used with the speech recognition system. IPE defines an easy-to-use systematic approach that can obtained 92.55% for the recognition rate of Korean speech and 89.93% for English.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.147-163
• /
• 2013

The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.140-145
• /
• 2010

In this work, to theoretically analyze the nonlinear charging characteristic, a Radial Basis Function Neural Network (RBFNN) is adopted. Based on the RBFNN, an charging characteristic tendency of a Linear Type Magnetic Flux Pump (LTMFP) is analyzed. In the paper, we developed the LTMFP that generates stable and controllable charging current and also experimentally investigated its charging characteristic in the cryogenic system. From these experimental results, the charging current of the LTMFP was also found to be frequency dependent with nonlinear quality due to the nonlinear magnetic behaviour of superconducting Nb foil. On the whole, in the case of essentially cryogenic experiment, since cooling costs loomed large in the cryogenic environment, it is difficult to carry out various experiments. Consequentially, in this paper, we estimated the nonlinear characteristic of charging current as well as realized the intelligent model via the design of RBFNN based on the experimental data. In this paper, we view RBF neural networks as predominantly data driven constructs whose processing is based upon an effective usage of experimental data through a prudent process of Fuzzy C-Means clustering method. Also, the receptive fields of the proposed RBF neural network are formed by the FCM clustering.

• Applied Microscopy
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2009

GM-CSF is a multipotent growth factor, which also plays an important role during the process of wound healing. rrhGM-CSF was specifically produced from rice cell culture in our laboratory (Hanson Biotech Co., Ltd, Daejeon). The rrhGMCSF contains more oligosaccharide side chains than any other types of GM-CSF. This work was taken to evaluate the influence on wound healing of rrhGM-CSF in male golden hamsters. Full thickness skin defects of 9 mm in diameter were made in the back of hamsters, and 100 ${\mu}L$ ointment containing rrhGM-CSF 50 ${\mu}g/mL$ was applied. Control groups were given ointment without rrhGM-CSF. The wound sizes were relatively reduced and skin was well regenerated in the experimental group compared with the control group. Structurally, reepithelialization and architecture of the skin following injury were well accomplished in the experimental group. And also, positive reaction of PCNA of the skin following injury was more prominent in rrhGM-CSF containing ointment treatment group. Since this type of GM-CSF has highly glycosylated side chains, the effectiveness might be retain longer and stable, regarding acceleration of wound healing in the animal model. The present study has important implications for further development of the therapeutic manipulation of wound healing using rrhGM-CSF.