• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.478-485
• /
• 2012

고분자는 우수한 투과선택도 및 가공성으로 인하여 여러 기체 혼합물의 분리를 위한 막의 소재로 널리 이용되고 있다. 본 연구에서는 polyamide 복합막을 이용하여 $CH_4$ 및 $CO_2$ 혼합기체의 분리특성에 관한 연구를 수행하였다. 본 연구를 위한 모사 기체로는 순수 메탄과 이산화탄소를 혼합하여 사용하였으며, 서로 다른 운전조건에서의 투과실험을 수행하였다. 주입 기체의 유량은 800~1000 $cm^3/min$으로 변화시켰으며, stage cuts의 변화는 50~60 %로 하였다. 또한 분리막의 운전 온도는 $30{\sim}70^{\circ}C$에서 변화시켰으며 기체의 초기 주입압력은 6 bar로 설정하였다. 각 실험조건에서 메탄과 이산화탄소의 투과도를 평가하였고 이때 permeate에서의 이산화탄소에 대한 선택도를 함께 평가하였다. 또한 본 연구에서는 Arrhenius plots를 이용하여 메탄과 이산화탄소의 분리막에 대한 투과 활성화 에너지를 얻었다.

• 한국터널지하공간학회 논문집
• /
• 제16권6호
• /
• pp.599-614
• /
• 2014

TBM으로 시공되는 터널은 기계에 의해 전단면 굴착(full face tunnelling)이 이루어지므로, 굴착면에 접근하는 것이 매우 제한적이다. 이러한 한계를 극복하고 TBM 터널에서 굴착면 전방의 지반상태를 정확히 예측할 수 있는 기술은 매우 드물다. 본 연구는 TBM에서 전기비저항을 사용하여 굴착면 전방의 이상지반을 예측할 수 있는 TBM 비저항 예측(TRP)시스템을 개발하고, TBM 현장에서의 적용성과 예측 정확성을 검증하기 위해 EPB 쉴드 TBM으로 시공 중인 지하철 터널에서 현장 실험을 수행하였다. TBM 비저항 예측 시스템은 전극을 사용하여 지반의 전기비저항을 측정하고, 이를 바탕으로 역해석을 수행하여, 이상지반의 위치와 두께 및 전기적 특성을 예측한다. 전극이 부착된 강관을 유압으로 굴착면에 압입하여, 전극이 지반과 완전히 접촉하도록 장치를 제작하였다. 또한, 전극이 챔버 내부를 관통하여 나아가도록 하는 동시에 토사유출을 방지하도록 설계하여 현장에서의 전방예측을 가능하게 하였다. 1차 실험 결과, 굴착면 근접 지반과 굴착면 전방 지반의 전기비저항 및 유전율이 동일하게 나타나 이상지반이 존재하지 않음을 예측하였다. 2차 실험 결과, 굴착면 전방 약 1 m 지점부터 상대적으로 낮은 유전율 비를 가지는 이상지반 구간이 약 5 m 길이로 존재함을 예측하였다. 이는 각각 지표에서 물리탐사 또는 시추를 통해 조사된 지반상태 및 TBM 굴착 중 예측 구간에서 반출되었던 버력을 관찰한 기록과 잘 일치하였다.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.376-385
• /
• 2016

본 연구는 신규간호사의 현실충격의 개념을 정립하고 정의하기 위해 시행되었다. 연구 분석 방법은 Schwartz-Barcott와 Kim의 혼종모형(Hybrid model)을 이용하였으며, 자료 수집은 S시와 G시에서 일하고 있는 6명의 신규간호사와 현실충격과 관련된 문헌으로부터 수집하였다. 본 연구 결과, 신규간호사의 현실충격은 3개의 영역과 9개의 속성으로 도출되었다. 3개의 영역은 인지적 영역, 정서적 영역, 상황적 영역으로 도출되었다. 인지적 영역은 현실충격을 일으키는 요인을 인지하는 것이며, 정서적 영역은 현실충격을 일으키는 상황을 직면한 후 나타나는 부정적인 정서 반응이며, 상황적 영역은 현실충격을 일으키는 상황을 말한다. 즉, 신규간호사의 현실충격 정의는 신규간호사는 (i) 학교에서 배운 것과 실무와의 차이, (ii) 이상과 현실의 가치 차이를 인지하고 (iii) 선임 간호사들의 전문성 부족, (iv) 간호사로서 존중받지 못하는 현실, (v) 생각했던 것보다 역할가중을 경험하게 되면서 무력감, 관계의 어려움, 혼란, 압박감과 같은 부정적인 정서를 갖게 되는 것을 말한다. 결과적으로 본 연구는 신규간호사의 현실충격의 개념을 정립함으로 인해 신규간호사의 현실충격을 경감할 수 있는 전략에 실제적인 밑거름이 될 수 있는 자료를 제공했다는데 의의가 있다.

• 자원리싸이클링
• /
• 제18권5호
• /
• pp.19-25
• /
• 2009

몰리브덴 산업에서 가장 중요한 광물인 휘수연석($MoS_2$) 정광은 일련의 산화배소정제 공정을 통하여 공업용 산화몰리브덴(technical grade $MoO_3$)으로 제조되어 각종 몰리브덴 화합물의 중요한 원료로서 사용된다. 본 연구에서는 저품위 휘수연석 정광의 산화배소 특성을 조사하였다. 실험은 0.08 atm~0.21 atm의 산소분압과 793~823 K의 배소은도 범위에서 TGA 장비를 사용하여 수행하였으며, 사용한 휘수연석 정광의 입자크기는 평균 $67\;{\mu}m$ 이다. 실험 결과 산화배소 온도 823 K, 시간 60분에서 95% 이상의 휘수연석이 산화몰리브덴으로 전환되는 것으로 나타났다. 또한 Jander 식이 저품위 몽골산 휘수연석 정광의 산화배소 속도 데이터를 분석하는데 유용한 것으로 분석되었으며, 산소 분압에 대해서는 0.11 차인 것으로 조사되었다.

• The Korean Journal of Ecology
• /
• 제25권1호
• /
• pp.9-17
• /
• 2002

Human activities greatly affect the environment causing its degradation. Urban development and road networks construction cause main impacts on ecosystems and particularly on vegetation cover: road constructions induce complete degradation of the vegetation cover and often leaves a hare land, sometimes without even a soil cover. Reconstitution of vegetation cover is necessary to limit superficial erosion and land slipping on the road, towards a reintegration of the site in the neighbouring landscape. Many approaches have been studied over the last 30 years aiming at this reconstitution of vegetation cover. At frost, the main purpose of land reclamation was to create a new ecosystem. At this time, the environment created was rather a "garden" with a new soil adapted to the plantation of "decorative" species. Then, in early 90′s many studies on the restoration ecology concept rather focused on adapting the vegetation to the existing conditions on the site, as in a side road embankment for example. Nowadays, we notice a large tendency towards the use of such adapted native species instead of industrially produced seeds. In southern France, our team have led research on the potentials of those local species for their use in revegetation processes with hydro-seeding. We therefore developed an approach combining the use of different types of species: Industrially produced, native and wild cultivated species. This method integrates the benefits of using available low costing seeds that are already used on large scale projects with better adapted species, issued form the cultivation of native species and seed production for their use on smaller scale and more costly but more effective results. The use of wild cultivated species seeds was developed in order to limit the cost and reduce harsh natural seed withdrawal in the natural environment In the case of the use of native species. Besides, the use of such seeds allowed a larger geographical scale of use than with local native seeds. In addition, our team began two years ago a research project in Lebanon aiming at the Introduction and development of the revegetation techniques in Lebanon. In fact, this country bared since 20 years the consequences of urban pressure on its environment especially by the development of quarries and road networks. Therefore, pioneer work is necessary to aim at the adaptation of these techniques to the local environment.

• 지역사회간호학회지
• /
• 제12권2호
• /
• pp.361-374
• /
• 2001

This study was done to identify a status of home visiting project as a community health nursing system, that was the organization. personal who have age, educational background, marital status, position, experience of the home visiting in the public sectors in part of Seoul. Kyonggi, Kang-won area, It was done to provide basis data for the development of effective visiting nurses project in the health sectors, where was Health Centers in urban and rural. Branch of Health Center in rural and Health posts. The question airs were distributed 352 public health workers who working place was 118 health workers in 12 health centers in Seoul. 56 public health workers among 39 health center and other public health sectors in Kyonggi and 178 public health workers among health center and health care sectors. Data collected from October to December. 2000. The analysis by SAS system with F test, percentage and frequency. The major result were as follows. The general characteristics of the respondent show that most of them were graduates from community college and RN-BS with broadcast that they had not completed CPHN course but only two health workers have trained for the visiting nurses project. As for their grade in the position, the most of health workers have seventh level and the other CHP were above sixth level in the health care post that in the government structure. This indicates that workers do not have great authority in decision making, the most period of works in the position was one and two years indicating that they change jobs frequently. On an average their clinical experience was 4.11 years which is ideal for the total service. As for preparation of staff for home visiting workers education on visiting nurses program have to receive short term or longer term training course for strong emphasis. The analysis showed that public health visiting workers responds about active job performance that based on an area, approach of acting by districts, education and position are shown statistically significant difference between acceptance of the visiting nursing job show the same as well as visiting nurses project. Special concerns for visiting Nursing care spread came to burden, many of activity carry out main solution is covered the health problem connective support system needs of quality and quantity which out health problem. As 71.1% of visiting health service held on the poor population was under the guardianship of the law, but people who health insurance wide application under law shown a tendency to increase gradually. The general characteristics of the patients showed 56.2% of female on average of age was 66.1 years old, they have health problem was the most of 47.6% of high blood pressure and stroke, the other and as a problem that economics, which is complex welfare with out health problem. Community health care service should be combined health and social work program. The form of delivery of visiting health care given the most guide and education with counselling and support. (33.6%) Among the six category of visiting care service shown statistically significant difference and next is fundamental care, remedy care with priority.

• 지역사회간호학회지
• /
• 제8권1호
• /
• pp.116-132
• /
• 1997

The purpose of the study is to find out how laws related to the nursing profession can be improved by analyzing the rules and regulations concerning nursing. Furthermore, to help settle legal matters in the process of doing nursing work. The data used for the study are the Health and Medical Act, the Maternal and Child Health Act, the School Health Act, the Special Act for Health and Medical Service in Rural Areas, the Industrial Health & Safety Act and the Notice on Nursing Professional Courses analyzed by age and content. The results of the study are as follows : First, basic nursing practice includes 'nursing care for recuperation and assistance in medical treatment and in special areas including the pre-vention of disease, maintenance of health, control of environment, and other therapeutic activities. It is suggested that the phrase 'assistance in medical treatment' should be eliminated as it limits the basic nursing practice to the assistance of the medical treatment. Second, Article 56 of the Health & Medical Act prescribes a special nurse but it does not prescribe a specific job. Accordingly, the new provison concerning the specific jobs of a special nurse should be added or a job guide should be inseated. Third, it is prescribed that those who have completed the training course after obtaining a license are qualified to be a midwife, a special nurse and a nurse practitioner working in special areas. However, school nurses, occupational health nurses and maternal and health workers are required to obtain a nurse license, but not to take an additional training course. Nurses working in special areas should be legally recognized as nurse specialists. The regulations to control various qualification standards consistently should be established. Fourth, the qualifications and types of nurses by area prescribed by Article 54 of the Health and Medical Act are not consistent with those of special nurses as recognized by affiliated organizations of the Korean Nurse Association and some hospitals. Accordingly, the qualifications and types of special nurses should be adjusted in consideration of special nurses. Fifth, as Article 16, Paragraph 2 of the Health and Medical Act does not prescribe the type and scope of first - aid treatment that nurses can provide, the first-aid treatment of nurses might be considered as an unlicensed practice. The specific regulations regarding these matters should be established. Sixth, the contents of the nursing record, which are prescribed by Article 21 of the Health and Medical Act as a duty, include 1) matters concerning body temperature, pulse, breath and blood pressure 2) matters concerning drug prescription 3) matters concerning input and output 4) matters concerning the treatment and nursing care (Article 17 of the Enforcement Regulations, Health and Medical Act). However, these matters are limited to basic nursing care and assistance in medical treatment. The new recording methods on nursing process are suggested to be adopted legally. Seventh, the prescription right entrusted to nurses which are prescribed by the School Health Act, the Special Act on Health and Medical Service for Rural Areas, and the Industrial Health and Safety Act are not consistent with the rights of nurses as prescribed by the Health and Medical Act. New regulations prescribing the partial right for medical treatment entrusted to nurses in consideration of the restraint of time and place in emergency situations should be established.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.233-244
• /
• 2006

Of many volatile organic detergents for metals, benzine(CAS No. 8030-30-6), of which the toxicity has not yet been proven, has been used as an alternative of the halide compounds in the consideration of toxic effects, global warming and the destruction of ozone layer. In order to evaluate the effects of the benzine on human body by investigating the subchronic inhalation toxicity, to obtain the basic data for establishing the criteria of exposure in working environments and to classify the hazardousness in compliance with the Industrial Safety and Health Act by evaluating the hazardousness, repeated inhalation exposure test was carried with SD rats. The rats were grouped by 10 females and males each. The repetitive inhalation exposures were carried out at 4 levels of concentration of 0 ppm, 60 ppm, 300 ppm, and 1,500 ppm, for 6 hours a day, 5 days a week, for 13 weeks. The results are described hereunder. 1. No death of the animals of the exposed and controlled groups in the test period. Not any specific clinical symptoms, change in feed intake quantity, abnormality in eye test, or change in activity were observed. 2. In the 300 ppm and 1,500 ppm groups, weight reduction in the female groups and weight increase of liver and kidney in the male groups compared with control group were observed with statistical significance(p<0.05). 3. In the blood test, the HCT increased in the male 300 ppm group and the number of hematocyte increased, MCV and MCH decreased in the male 1,500 ppm group. In the female 1,500 ppm group, the HB decreased and the distribution width of the hematocyte particle size increased. In the blood biochemistry test, the TP in the male 1,500 ppm group and the LDH in the female 1,500 ppm group were increased with statistical significance(p<0.05). 4. Under the test conditions of the present study with SD rats, the NOEL was evaluated to be from 60 ppm to 300 ppm for both male and female groups. By extrapolation, the NOEL for human who work 8 hours a day was evaluated to be from 128 ppm to 640 ppm 5. Since the NOEL evaluated in this study do not exceed 60ppm(0.184 mg/L) the test material does not belong to the classification of the hazardous substance "NOEL${\leq}$0.5mg/L/6hr/90day(rat), for continuous inhalation of 6hours a day for 90 days" nor to the basic hazardous chemical substance class 1(0.2 mg/L/6hr/90day(rat) defined by the GHS which is a criteria of classification and identification of chemical compounds. However, considering the boiling point($30-204^{\circ}C$), flashing point($-40^{\circ}C$), vapor pressure(40 mmHg), and the inflammable range(1.0 - 6.0 %), sufficient care should be taken for handling in the safety aspects including fire or explosion.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.181-195
• /
• 1997

The purpose of this study was to investigate factors affecting the composition and concentrations of fumes generated from various types of welding processes. The results are as follows. 1. Iron(Fe), zinc(Zn) and manganese(Mn) were predominant in Welding fumes. The Fe content in total fumes was 25.5% in coated electrode and 28.2% in $CO_2$ are welding, and the Zn content was 4.5% and 9.1%, respectively, and the Mn was 3.6% and 7.8%, respectively. 2. It was found that the important factors determining composition and concentration of fumes were type of industries, type of welding processes, type and composition of electrodes, composition of base metals, confinement of workplaces or condition of ventilation, work intensity, coated metals such as lead and Zn in paint. 3. The Mn content in airborne fumes was highly correlated with that of electrode(r=0.77, p<0.01) and was about 4 times higher than that in electrodes or base metals. The results lindicate that Mn is well evaporated into air during welding. The higher vapor pressure of Mn may explain this phenomenon. 4. the airborne total fume concentrations were significantly different among types of industries(p<0.001). The airborne total fume concentration was higher in order of sleel-structure manufacturing($GM=15.1mg/m^3$), shipbuilding($GM=13.2mg/m^3$), automobile-component manufacturing ($GM=7.8mg/m^3$) and automobile assembling industry($GM=3.0mg/m^3$) 5. The airbone total fume concentration was 6 times higher in $CO_2$ welding than in coated electrode welding, and approximately 3 times higher in confined area than in open area, in steel-structure manufacturing industry. 6. The concentration of welding fume outside welding helmet was about 2 times higher than that inside it. It is recommened that air sampling be done inside helmet to evaulate worker's exposure accurately, for it has an outstanding effect on reducing worker exposure to fumes and other contaminants.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.751-757
• /
• 2003

10 wt% A1$_2$O$_3$-Y$_2$O$_3$-CaO를 첨가한 SiC-30 wt% TiC 분말을 스파크 플라즈마 소결(SPS) 방법을 사용하여 급속 치밀화 하였다. SPS 공정은 매우 빠른 승온 속도와 짧은 시간에 완전 치밀한 시편을 얻을 수 있다. 본 실험에서, 승온 속도와 압력은 $100^{\circ}C$/min과 40MPa이고, 소결 온도 범위는$1600^{\circ}C$~$1800^{\circ}C$이었으며, 10min 동한 유지하였다. $Al_2$O$_3$, $Y_2$O$_3$ 및 CaO를 첨가한 SiC-30 wt% TiC 복합체는 $1700^{\circ}C$ 이상 온도에서 스파크 플라즈마 소결 방법으로 완전 치밀화가 이루어졌다. 모든 SPS 공정 온도에서 탄화큐소으 상전이나 YAG 결정상의 형성 없이 3C-SiC와 TiC 만이 XRD에서 나타났다. 급속 소결한 SiC-30 wt% TiC 복합체의 미세구조는 비교적 작은 등축상 SiC 결정립과 비교적 큰 TiC 결정립으로 구성되었다. $1750^{\circ}C$에서 제조한 시편의 이축강도능 635.2MPa이고, 파괴인성은 6.12 MPaㆍ$m^{1/2}$이었다.