• 한국안전학회지
• /
• 제28권1호
• /
• pp.88-94
• /
• 2013

The purpose of this study is to find out the difference of foot pressure according to the firefighter's work postures for providing the basic information to prevent Musculoskeletal disorders. This study was conducted by 9 male firefighters. Work postures were selected for rescuee handling, fire hose and hydraulic rescue equipment work postures. These were divided into 3 position, "High", "Middle" and the postures of taking out and letting down hydraulic rescue equipment were analyzed as starting point and end point respectively. Foot Pressure was used to analyze contact area, peak pressure, and maximum force in terms of work postures, and compared between fire hose and hydraulic rescue equipment work postures. The results of foot pressure are as follows. According to the results of rescuee handling work postures, one person handling posture showed wide contact area and foot pressure showed the highest at right foot. Accoridng to the (High), (Middle), (Low) postures of fire hose, the results didn't show the difference among the contact area, peak pressure and maximum force. As the results of hydraulic rescue equipment work postures, (Low) postures showed the highest in terms of the right foot of contact area, peak pressure and maximum force and (High) postures showed the highest in left foot. The increase of foot pressure lead to be inconvenience of low extremity and muscle fatigue for maintaining postural control cause pain. Thus, it is necessary to design insole-equipped working shoe for reduce the impulse and effect of foot during the rescuee handling work which standing out as foot pressure.

• 복식문화연구
• /
• 제19권5호
• /
• pp.1019-1030
• /
• 2011

The aim of this study was to develop a pattern of flight attendant uniform shirts to provide better comfort for their work postures. Flight attendants' work postures were evaluated to determine the problems of clothing and mobility during their work. The pattern of the flight attendants' uniform shirt was altered by applying dynamic wearing ease(DWE). DWE was calculated from four standardized dynamic postures and a static posture. An experimental garment was made with the altered postures. The researcher redesigned the pattern of the uniform shirts, which minimizes physical limitations in movements. The fit and mobility of the shirts were evaluated. Results of this study are as follows. First, the five representative work postures were selected by "clothing stress" and "repetitiveness." These postures included raised arms, twisting midriff and shoulder postures. Five representative postures were selected by using the ergonomic posture assessment device index(OWAS). Second, the experimental garment was developed by applying DWE across the back and at armhole depth, back length, and side length. Third, the fit and mobility of the experimental garments and the original uniform shirts were compared at the flight working environment set and 5 dynamic body postures of raising arms. The experimental garments made with an altered pattern provided better fit and mobility than the original sample shirts.

• 한국산업보건학회지
• /
• 제8권1호
• /
• pp.36-49
• /
• 1998

The purpose of this study is to investigate the relationship between the work postures and upper extremity cumulative trauma disorders(CTDs) in female medical insurance bill reviewers(n=448). This study included diagnosis for CTDs, anthropometry and job analysis (workstations and posture). The characteristics of subject were 33.6 years of average age and 8.7 years of average work duration. The results were as fallows. Ergonomic conditions of workstation were unsuitable compared with anthropometry result. The height of work surface(79.5 cm) and chair(43.0 cm)were high. work space was small, and legs space under the table was limited. Work postures were awkward compared with recommended neutral postures. Neck flexion($21.0-36.0^{\circ}$), elbow elevation, shoulder abduction ($46.0-47.0^{\circ}$). wrist radial and ulnar deviation, forearm supination and pronation, and wrist repeated motion(12.7-21.5 freq./min) were analyzed as hazardous risk factors by job analysis. The prevalence of CTDs was 32.8 % by medical diagnosis. The prevalence rate of CTDs in hazardous work posture group was significantly greater than safe work posture group both neck-shoulder (relative prevalence = 5.2, p<0.001) and wrist-hand (relative prevalence = 2.5, p<0.05).

• 대한인간공학회지
• /
• 제28권3호
• /
• pp.81-85
• /
• 2009

Work related musculoskeletal disorders(WMSDs) was a leading cause of sick leave and injuries in the industries of our country. Posture was an important consideration in the design of work method and workplaces, because it affected the ability of workers to use various equipments and influenced how long they could perform their job without feeling discomfort, fatigue, and musculoskeletal disorders. Imbalanced lower limb postures such as a squatting posture were awkward working postures common to the shipbuilding shops, farms, automobiles assembly lines in our country. Different awkward working postures were known to be associated with specific musculoskeletal disorders. Eight postures in lower limb postures divided into balanced and imbalanced postures were evaluated by electromyographic(EMG) activity for lower limb muscles. Twelve male subjects participated in this study. This paper was to analyze the effects of lower limb muscles workload according to lower limb postures(knee angle) and working time. The ANOVA results showed that most EMG root mean square(RMS) values were statistically significant effect according to lower limb postures(knee angle) and working time. Therefore, the results of this study will provide the basis to evaluate workload of lower limb postures correctly adopted by workers in various jobs and the ergonomic reference to prevent WMSDs.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.165-170
• /
• 2012

Objective: The aim of this study is to develop new K-OWAS on the basis of the anthropometry of Koreans considering works in shipbuilding and heavy industry for evaluation whole-body working postures. Background: Work Related Musculoskeletal Disorders(WMSDs) were a leading cause of sick leaves and injuries in the industries of our country. Especially, awkward working postures and handling of heavy weight are known as a main cause of WMSDs. OWAS, RULA and REBA are much used as the method for evaluating the awkward working postures. OWAS is the working postures evaluation method that can be used for the evaluation of whole-body working postures. OWAS was the method made based on the anthropometry of the foreigner, working postures and weight does not fit our work state. Method: This method was evaluated considering the anthropometry of the Koreans, working postures and weight in shipbuilding and heavy industry work state in Korea. Results: Correlation of action level of OWAS and subjective discomfort for each body parts were not statistically significant($p{\geq}0.1$). But correlation of action level of K-OWAS and subjective discomfort for torso and waist were statistically significant($p{\leq}0.1$). Conclusion: K-OWAS was suitable in the evaluation of upper body including torso and waist. Application: New method for whole-body working postures from this study prevent WMSDs and help improvement of working environment and design of working method.

• 대한인간공학회지
• /
• 제10권2호
• /
• pp.3-13
• /
• 1991

As the VDT work constrains work postures because of its work characteristics. VDT worksta- tions should be properly designed so as to be fitted to various types of physical conditions of op- erators. Therefore, in this study, the preferred settings of VDT wrokstation dimensions of operators. Therefore, in this study, the preferred settings of VDT workstation dimensions and work postures were studied in order to determine the appropriate dimensions and the work postures for VDT operators which will alleviate the musculoskeletal troubles or visual fatigue. The scpoe of the study is as follows. 1. Measurement and analysis of the preferred settings of the height of workstation, keyboard, seat, and screen among the experienced VDT operators. 2. Anaysis of the relationship between the preferred settings of workstation height and the seat height control among the experienced VDT operators. 3. Analysis of the work postures of the experienced VDT operators.

• 대한산업공학회지
• /
• 제28권2호
• /
• pp.223-231
• /
• 2002

Recently, work-related musculoskeletal disorders(WMSDs) have rapidly increased and have been a major issue in the field of industrial safety. Of several physical risk factors for WMSDs, which include postures, vibration, repetitive work, speed or acceleration of movements, etc., awkward postures have been known as one of the major causes of WMSDs. For reducing the potential for injury as a result of postures, cost effective quantification of the magnitude for physical exposure to poor working postures is important and needed. To do this, several postural classification schemes have been developed and used in industrial sites. It is known that perceived discomfort for joint motions and muscle strength for females were much less than those for males. However, the existing postural classification schemes were developed without considering these gender effects. This study aims to develop a new postural classification scheme for female workers, based on the perceived discomfort for joint motions. The result showed that there was significant difference between the schemes for female and male. It was also found that when compared with OWAS, RULA and REBA, postural load was quantified more precisely with the developed scheme. It is recommended that different schemes according to gender of workers involved in work be used in order to accurately evaluate postural load of work postures.

• 대한인간공학회지
• /
• 제25권3호
• /
• pp.61-66
• /
• 2006

Awkward work postures in workshop highly affect on work-related musculoskeletal disorders(WMSDs). Especially, in automobiles assembly process, these awkward work postures of workers may cause serious injury and illness. This study is to compare the performance among the evaluation tools which can measure the work-loads caused by the awkward work postures in automobiles assemble process. RULA, REBA and TVAL(Toyota Verification of Assembly Line) are used as the evaluation tools. The 85 jobs selected in the automobiles assembly process are applied to the three tools and their performances are analyzed after the evaluation of the work-load in each job. Through various measures of performance such as statistical test, DUNCAN test, regression test etc., the tendencies and characteristics among them are analyzed in detail.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.473-480
• /
• 2011

Objective: This paper presents the results of a literature review undertaken to analyze the types and risk factors of unsafe posture in accordance with the crops and the working position and to introduce various ergonomic intervention approaches. Background: There is clear and consistent evidence that agricultural work has been rated as one of the dangerous occupations in the world. A considerable number of adverse health conditions, including musculoskeletal disorders(MSDs) are related to agricultural work. Method: An agricultural work requires squatting, kneeling, and bending(stooping) postures for significant periods of the work day which due to a wide variety of activities such as planting, cultivating and harvesting various agricultural products. Thus, each of these postures is analyzed in detail to recommend the improvement methods. Results: Various unsafe postures in agricultural works are revealed and analyzed. It is proven that ergonomics intervention has the potential benefits to reduce MSDs among agricultural workers. Two types of ergonomic intervention methods were discussed to improve unsafe working postures, engineering controls and administrative controls. Conclusion & Application: As a concluding remark, this article can be used as a reference manual for the agricultural workers and also used to raise the research community's awareness to the risk of unsafe working postures for workers in agriculture.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.704-712
• /
• 2018

This study analyzed working postures using the Ovako Working Posture Analysis System (OWAS) to improve work clothes for construction workers. A video taken at a construction work site was stopped at regular intervals and the postures of relevant body parts proposed by OWAS was recorded. Additionally, based on analysis of the working postures code, the level of work action for each postures was classified from stage I to IV. General workers frequently straightened or bent forward at the waist, and used their legs to stand, bend, or walk. Wood workers moved extensively from the waist, keeping their legs relatively straight and their arms held below their shoulders, repeatedly tapping with a hammer weighing less than 10.0kg. Rebar bending workers mainly bent forward at the waist, with both legs bent or standing with one leg bent. Rebar transport and fixing workers walked with the waist straight, and occasionally one or both hands held above the shoulders. Their work also involved holding a hook, which weigh less than 10.0kg, in their hands, and the difficult task of lifting and placing long rebars, which weigh from 10.0 to 20.0kg or more. Concrete pouring workers bent or twisted their back to the side. Therefore, this study suggests that design goals should be different when developing workwear for each type of worker.