• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.429-436
• /
• 2005

This paper reflects on the ergonomical criteria for a humane working atmosphere in industrial buildings while respecting and paying close attention to the physical, mental, and stressful demands of the work environment. It describes effective construction codes and standards of practice and their importance in ensuring a safe environment for working people. Also addressed are the objectives for a productive work environment and its organization. The paper considers the significance of a proper working environment, the use of dangerous working materials, the use of proper ventilation, climate, and lighting to ensure that the productivity of the enterprise is met with common goals shared between employer and employee. The connection between the legal foundation and the design of industrial construction is the focus of this paper. It shows that the planning and executive persons are obliged to observe the relevant construction laws and regulations including standards and codes of practice. Additionally discussed are the possible solutions and consequences for development in the productional, constructional, and ergonomical fields of design.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1847-1852
• /
• 2004

This article provides the connection between feedback stabilization and interpolation conditions for n-D linear systems (n > 1). In addition to internal stability, if one demands performance as a design goal, then there results an n-D matrix Nevanlinna-Pick interpolation problem. Application of recent work on Nevanlinna-Pick interpolation on the polydisk yields a solution of the problem for the 2-D case. The same analysis applies in the n-D case (n > 2), but leads to solutions which are contractive in a norm (the "Schur-Agler norm") somewhat stronger than the $H^{\infty}$ norm. This is an analogous version of the connection between the standard $H^{\infty}$ control problem and an interpolation problem of Nevanlinna-Pick type in the classical 1-D linear time-invariant systems.

• Journal of the Korean Society of Safety
• /
• v.30 no.2
• /
• pp.27-34
• /
• 2015

Nowadays, remodeling cases for some apartment like Hyundai through the support of government are reported. Conventionally, balcony and aisle are extended for additional private area or balcony which is supported by new frame is extended. In extension work at site, dowel bar is conventionally inserted in old concrete slab for connection with old and new slab, however, an examination for structural safety is rarely performed prior to construction, if ever, vertical load is only considered for structural analysis. When conventionally connected structures are exposed to earthquake, the old and new structures have individual earthquake behavior with different mode, which may lead the elimination of resistance to earthquake in new structures. As of this reason, new detailing connection system which can have light weight and sufficient ductility performance is developed for application to domestic extension works. Additionally, user manual and specification are also developed for fertilization of application for the developed technology.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.141-145
• /
• 2006

The development of information & communication technology in 21st century along with the mass media In 20th century, the influence of state-of-art culture in our society rapidly increased in these days. This state-of-art culture makes the world becomes single-channeled by network, and there is a big change not only in human life but also in concept and understand for art and space. The development of digital paradigm and media technology is exerting a strong influence on the Ubiquitous computing environment that is being drawn great interest. The ubiquitous is concerned as expansion of media art, and the interactive art which is part of media art has the similarity with the ubiquitous computing environment. In this study, the possibility of connection between the territory of ubiquitous environment which is recently focused and has strong interrelation feature, and the territory of interacting will be examined. Furthermore, possibility of new space design work through seeking the possibility of connection between two territories will be estimated.

• Structural Engineering and Mechanics
• /
• v.8 no.4
• /
• pp.343-360
• /
• 1999

This work applies a structural analysis method based on an analytical solution from the Fourier series which transforms a half-range cosine expansion into a static solution involving plated structures. Two sub-matrices of in-plane and plate-bending problems are also formulated and coupled with the prescribed boundary conditions for these variables, thereby providing a convenient basis for a numerical solution. In addition, the plate connection are introduced by describing the connection between common boundary continuity and equilibrium. Moreover, a simple computation scheme is proposed. Numerical results are then compared with finite element results, demonstrating the numerical scheme's versatility and accuracy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.339-340
• /
• 2012

Green frame is combined by structural steel and reinforcements of Green column and beam and unified by cast-in-place concrete. However, when upper reinforcements penetrate structural steel hole, the execution is difficult due to interference of joint and a rib of deformed reinforcements. Therefore, the objective of this study is to propose the reinforcement tools to improve productivity of precast structure connection construction. The reinforcement tools proposed in this study can be helpful to improve constructability, safety, duration, and cost comparing with conventional reinforcement method since unskilled workers can deal with reinforcements easily.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.302-303
• /
• 2018

This study analyzed the major revision factors and revision contents for 'Construction-Standard-Production-Rate for Construction Works in 2018. Part 16. Pipe Laying Down and Connection" which was revised by the construction expense estimation standard's middle and long-term plans. The main reasons for the revision was analyzed to be unclear construction scope, limitations in applicable pipe material based on the facility type, labor force mainly composed of ordinary workers, limitations of labor force, and incomplete appropriation standard for the tool rent fee and equipment expenses. Through revision of factors, common items were newly established, organization was revised, the labor force was mainly composed of the technicians, and basis for appropriation of equipment expenses was arranged. In addition, through periodic revision, the appropriation standard for bend and special pipes was set. Consequently, more practical construction cost estimate standard is arranged through revision.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.412-419
• /
• 2001

In accordance with the PON(passive optical network) could be setup, effective connections with light sources, optical detectors, and optical fibers are the best sensitive points to represent the efficiency of network. Therefore, in this paper we designed and fabricated optical transceiver connection chip that was consisted of channel waveguide, Y-branch, and CWDM on the 2" BK7 glass substrate. This chip can be used for 1.31/1.55${\mu}{\textrm}{m}$ CWDM network and 1.55${\mu}{\textrm}{m}$ region dense WDM network.work.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.289-302
• /
• 1999

As the size and complexity of network increase Distributed System Management (DSM) will be significant issue within information network in order to increase the high reliability and to improve the flexibility of network management. The OSI management model has several problems. The key problems are that it does not fully address the problem of how to develop communication protocol in support of DSM and how to classify the management connection criteria. In this paper to solve first problem described above this paper propose the connectionless CMIP to accomplish for effectively managing the distributed management managing systems to handle the dynamic informations. To work out second problem we introduce the connection criteria in the hierarchy of management system and finally evaluate the efficiency of a suggested protocol during cooperative negotiation among the managing system.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.288-296
• /
• 2012

The method proposed by the author is intended for assistance in decision-making (concerning changes of connections) by operators of complex distribution systems during states of malfunction (particularly in the events of malfunctions, for which the consequences encompass extended parts of the network), through designation of connection action scenarios (creating substitute configurations). It is the use by the classifying system working with the co-evolution algorithm that enables the effective creation of substitute scenarios for the Medium Voltage electric power distribution network. The author also completed works concerning the possibility of using cooperation of the evolutionary algorithm and the co-evolutionary algorithm with local search algorithms. The method drawn up may be used in current systems managing the work of distribution networks to assist network operators in taking decisions concerning connection actions in supervised electric power systems.