• Explosives and Blasting
• /
• v.12 no.1
• /
• pp.5-31
• /
• 1994

On the Seoul Sub-way Tunnel works (8-6 site ). Cautious blasting works were so effectivelly tarried out the vibration record were under 0.3cm /sec and blasting noise was under 75dB which was measured at the ground of house. As a result cautious blasting works under above allowable value was not influenced the structure of house and living. On the architectural survey, There were some hair crack on the wall and floors but this was not a crack from balsting work.

• Explosives and Blasting
• /
• v.11 no.1
• /
• pp.5-33
• /
• 1993

On the cable Tunnel works. Cautious blasting works were so effective and carried out. The vibration record were under 0.4cm / sec and blasting noise are under 75dB Which it was measured at the ground of Tailor House. As a result cautious blasting works under above allowable value, are not Influenced the structure of house and living. On the architechtural survey, there were some hair crack on the wall but this was not crack from recently blasting work.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.351-354
• /
• 2002

NAPTR(Naming Authority Pointer) is a type of resource record specified IETF RFC 2915. NAPTR enables to register various services in tile domain name systems and thus Provides a way to discover services available on specific hosts. This paper describes the design and implementation of a proxy DNS system aimed at supporting NAPTRS. The goal of this work is to study on the feasibility of the service discovery registered in DNS via NAPTR records. This research result can be applied to service discovery in the resource information management for high performance GRID environments as well as to implement generic ENUM services

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.3
• /
• pp.212-221
• /
• 2007

This paper describes on the evaluation and management of work process in suction hopper dredger and grab bucket dredger as an application of a PC-based ECDIS system. The dynamic tracking of dredging bucket and the data logging of grab dredging information were performed by using the grab dredging vessel "Kunwoong G-18". The position and route tracking of the dredger moving toward the ocean dumping site of dredged material was performed by using the hopper dredging vessel "Samyang-7". The evaluation of wok process in the dredging field, for grab dredger, was continuously carried out on January to May, 2006, in Incheon Hang and for hopper dredger, on July to December, 2003, in Busan Hang, Korea. The dredging information, such as dredger's position, heading, dredging depth and route track which was individually time stamped during the dredging operation, was automatically processed in real-time on the ECDIS and displayed simultaneously on the S-57 ENC chart. From these results, we conclude that the ECDIS system can be applied as a tool in order to manage the work process during the dredging operation, and also in order to generate the factual record of the dredging activities that is sufficient for dredging inspector to accurately evaluate the contract performance even in the absence of a full-time onboard inspector.

• Journal of the Korean Institute of Educational Facilities
• /
• v.23 no.6
• /
• pp.27-34
• /
• 2016

Although the scale and number of university facilities have increased, the maintenance of these facilities has not been efficient as maintenance costs incurred during facility operation periods, as well as management time, have not been sufficiently considered. In this study, the maintenance record data of national universities was compared and analyzed to analyze factors that incur maintenance costs according to the uses and costs of the facilities. According to the results, the number of cases of maintenance and repair work for basic educational facilities was shown to be the largest, accounting for 79%. The number of maintenance and repair work occurred according to work type was examined. According to the results, the highest ratio of maintenance and repair work occurred in the field of construction, specifically, the maintenance costs required for facility supplementation accounted for the highest ratio. Maintenance costs per unit area decreased over time in the newer university facilities, while showing a tendency to increase in older university facilities. However, there were cases where maintenance costs did not show any trends due to factors such as the limited maintenance budgets owing to the characteristics of public service facilities and facilities in the stage of deterioration or destruction after the stage of stabilization. This study is considered to be helpful for efficient university facility maintenance plans and budget calculations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1952-1959
• /
• 1999

The work factor approach, so-called single specimen technique could be used to determine energy release rate from a single test record for unidirectional CLS specimen. In the present study, the work factor approach was extended to determine the mixed-mode fracture toughness of multi-directional graphite/epoxy laminated composites. Multi-directional CLS specimens were used for fracture tests. The stacking sequences used for the lap and the strap were $[90_2/0_2]_s/[0_4/90_4]_s$ and $[0/\pm45/0]_s/[0_2/\pm45_2/0_2]_2$, respectively. For both cases, the fracture toughness determined from the work factor approach was compared with that determined from the compliance method. It was found that both methods produced fracture toughness within a maximum 15% difference for each stacking sequence. The fractography analysis also showed that the fiber bridging occurred for$[0/\pm45/0]_s/[0_2/\pm45_2/0_2]_2$ case while it did not occur for $[90_2/0_2]_s/[0_4/90_4]_s$ case.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.2
• /
• pp.1-9
• /
• 2018

Currently, the record of part-timer is mainly written in handwriting or using excel work schedule, paper work recorder, and time attendance program using POS program. And, work table, commute records, paycheck are managed separately. Time-attendance information is not linked and is managed separately, and payment of wages is often not done accurately. And, it is difficult to pay the wages because it is not able to accurately grasp the state of attendance of part-timer. Therefore, it is necessary to have a transparent wage and work management system based on the trust between the owner and the part-timer. In this paper, we design a system that can perform real-time commute check using beacon, transparent wage management, wage calculation by automatic calculation, and smooth communication between owner and the part-timer. We have also implemented a store management mobile application using Android Studio 2.3, Eclipse, Android 5.1 and Beacon devices in a MySQL environment.

• Journal of Korean Society of Archives and Records Management
• /
• v.22 no.1
• /
• pp.177-200
• /
• 2022

Administrative information datasets are a kind of record produced based on an organization's work performance. A dataset is evidence of the act of recording and contains a lot of information that can be used for work. Datasets have been neglected in Korea's records management system. However, as the law was revised in 2020, the management of administrative information datasets was legislated. Organizations that require management of administrative information datasets have already gradually begun record management. The core of managing administrative information datasets is the preparation of the Management Reference Table for the dataset. Regardless, there is confusion with the Records Management Reference Table for Dataset in institutions that work on records management, and it is difficult to work because the Management Reference Table for Dataset has a new concept. This study looked into the problems in the records management of datasets that appeared at the beginning of work. It isuggests a method to effectively settle records management for datasets. In that way, the Management Reference Table was selected as the research subject, and the problems discussed so far were summarized. In addition, the items of the current Management Reference Table were analyzed. As a result of the study, we have proposed the simplification of items in the Management Reference Table, the reorganization of areas in the Management Reference Table, the introduction of the concept of retention periods, and the preparation process of the Management Reference Table.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1298-1303
• /
• 2008

In Korea, the management and remedial system of the slope near national road and highway has been studied actively. But in case of the slopes exist at the residential area and local government, there is not exact record of them. So in this study, we carried out analysis about nearly 14000 slopes which were reported by local government as the dangerous area. and went to the field work some of them.

• Journal of the Korean housing association
• /
• v.21 no.4
• /
• pp.59-69
• /
• 2010

Imwongyeongjeji, Administration of Our Daily Life in Woods and Fields, is a sort of encyclopedia compiled by Seo, Yoo Goo in Joseon Dynasty in the 19th century. This voluminous work is made up of 16 chapters with various references including many articles dealing with architecture. The chapter Seomyongji covering the daily necessities contains a number of methods and materials of building construction. The distinctive feature of these articles is that they are mostly from Joseon's books. It is not similar to other chapters which are made of quotations from Chinese books. Especially, he quoted many of articles about architecture from his own work Geumhwagyeongdokgi, Record of Plowing and Reading in Geumhwa. In addition, He selected only empirical knowledge, put it in the book, and commented on it in his judgment. These articles provide valuable information on architectural knowledge in late Joseon period.