• Journal of Digital Convergence
• /
• v.9 no.4
• /
• pp.213-222
• /
• 2011

The purpose of this paper is to propose a smart work implementation strategy of Korean companies. Recently in Korea, the interest in smart work is growing and actively promoting but the introduction of private enterprise strategy is absent. However the smart work has been highlighted several issues. In this paper, among the issues, we studied the strategy for introducing smart work system with respect to the related research and literature on strategies and guidelines that may be introduced to the system. With reference to the actual introduction of the basic directions for the procedure proposed by the Korea Communications Commission, we try to review the operating guides and to propose smart work 2.0 implementation strategy, framework and some procedure.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.111-117
• /
• 2013

In this paper, we have proposed novel technique to improve maintainability for training vehicle of underwater weapon system. In case of under water weapon, the fire procedure is related with operation of expulsion system in submarines. So the submarine crews should practice the complex fire procedure of weapon system by using training vehicle, which is safer and cheaper than operational weapon. After emitted from submarine, the training vehicle rise to the surface and should be withdrawn from the sea. The recovered training vehicle is transported to maintenance depot and pass through the recycling procedure including disassembling the vehicle, data acquisition & analysis, battery charge, replacing expandable components, testing the captive equipment, and assembling the vehicle. The disassembling & assembling of training vehicle which is composed of watertight section or airframe, is time-consuming work. So in this paper, we have studied the elements of recycling procedure and propose the method to exclude the assembling & disassembling work for maintainability improvement.

• Journal of Korean Society for Quality Management
• /
• v.16 no.1
• /
• pp.32-42
• /
• 1988

The general n/m job-shop problem is easy to state what is required, but it is extremely difficult to make any progress whatever toward a solution. This paper was first to examine a heuristic procedure of general n/m scheduling generation focused on the procedure of MWRK (Most Work Remaining) presented by Giffler and Thompson (1960) among others. Then modified procedure was proposed to obtain better solution in light of the key measure of performance compared with that of the literature presented by Baker (1974). The modified procedure then has been extended to other example problem to test the better results and to assure the properness of application.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.169-177
• /
• 1997

The purpose of this paper is to study the ideal Auto-surveying system and to establish the standard of work procedure involved with completing a precise three-dimensional topographic survey with RTK GPS equipment, a pen based personal computer, and real time CADD software. The fieldwork was done at a golf course which could be regarded as a heavy civil project site such as the reclamation and the site preparation work in December of 1997. The proposed Auto-surveying system and the work procedure in this paper is based on the data processing and the resultant topographic map of the golf course.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.153-156
• /
• 2003

Recently, as changing construction environment, we have come to need rational systematic and transparent in construction industry. In other to consider application possibility of CM in specialty construction, in this study improvement of procedure management by several construction phases in the coating with paint work.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.5 no.7
• /
• pp.49-58
• /
• 1982

To secure a good quality computer program, the software manufacturing procedure is carefully studied into 2 categories, manufacturing and developing phase. The former consists of 8 steps which are divided into 2 main categories, work-contains and documentation, the letter contains work planning, progress management, walk through and quality control. In this paper, I suggest the general procedure of standardization for software manufacturing.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.157-160
• /
• 2000

This study is concerned with how to optimize the Input sequence of product models with sequence -dependent setup time in Mixed-Model Assembly Line (MMAL) using conveyor system. Usually MMAL consists of a number of stations linked by conveyor belt and each station has a work zone limited by upstream and downstream boundaries. To avoid improper interference between operators in the adjacent stations and excess of machine moving range, operators are forced to complete their operations within their predetermined work zone. In this study, our goal is to determine sequence of models for minimizing the total work unfinished within their work zone. A generalized formulation of the product sequencing problem in MMAL is presented and we developed an optimal procedure using Branch & Bound. Also we developed a heuristic procedure using local search.

• Coupled systems mechanics
• /
• v.3 no.1
• /
• pp.1-25
• /
• 2014

In this work, we present the theoretical formulation, operator split solution procedure and partitioned software development for the coupled thermomechanical systems. We consider the general case with nonlinear evolution for each sub-system (either mechanical or thermal) with dedicated time integration scheme for each sub-system. We provide the condition that guarantees the stability of such an operator split solution procedure for fully nonlinear evolution of coupled thermomechanical system. We show that the proposed solution procedure can accommodate different evolution time-scale for different sub-systems, and allow for different time steps for the corresponding integration scheme. We also show that such an approach is perfectly suitable for parallel computations. Several numerical simulations are presented in order to illustrate very satisfying performance of the proposed solution procedure and confirm the theoretical speed-up of parallel computations, which follow from the adequate choice of the time step for each sub-problem. This work confirms that one can make the most appropriate selection of the time step with respect to the characteristic time-scale, carry out the separate computations for each sub-system, and then enforce the coupling to preserve the stability of the operator split computations. The software development strategy of direct linking the (existing) codes for each sub-system via Component Template Library (CTL) is shown to be perfectly suitable for the proposed approach.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.111-117
• /
• 2008

An automation process of filter unit is presented for the application of the assembling procedure and dry furnace work. By that automation procedure, it is expected to enhance working environment such as reducing laboring load, harmful gas, and burning scald. Furthermore, this automation process also minimizes via standardization of manufacturing process so that it may increase productivity and reliability. An automation process of filter unit is presented for the application of the assembling procedure and dry furnace work. Filter automation process also gives a good quality and productivity by simplifying to only one line from the complicated process such as filter cutting$\rightarrow$ adhering$\rightarrow$fabricating in a very small space. It is found that a new conceptual design of dry furnace shows the better quality like uniform heat distribution compared to the conventional design. It is also found that the present design gives a better working environment by adding cooling system.

• Journal of the Korea Safety Management & Science
• /
• v.1 no.1
• /
• pp.69-77
• /
• 1999

One of the objectives of any task design is to provide a safe and helpful workplace for the employees. The safety and health module may include means for confronting the design with safety and health regulations and standards as well as tools for obstacles and collisions detection (such as error models and simulators), Virtual Reality is a leading edge technology which has only very recently become available on platforms and at prices accessible to the majority of simulation engineers. The design of an automated manufacturing system is a complicated, multidisciplinary task that requires involvement of several specialists. In this paper, a design procedure that facilitates the safety and ergonomic considerations of an automated manufacturing system are described. The procedure consists of the following major steps. Data collection and analysis of the data, creation of a three-dimensional simulation model of the work environment, simulation for safety analysis and risk assessment, development of safety solutions, selection of the preferred solutions, implementation of the selected solutions, reporting, and training. When improving the safety of an existing system the three-dimensional simulation model helps the designer to perceive the work from operators point of view objectively and safely without the exposure to hazards of the actual system.