• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.234-245
• /
• 2003

Most of the concrete bridge structures are exposed to damage due to the excessive traffic loading and the aging of the structure. The damage of concrete causes the further deterioration of the function in the concrete structure due to corrosion of the reinforced bars and decohesion between the concrete and the reinforced bar. The quick rehabilitation of the damaged concrete structures has become of great importance in the concrete structural system in order to avoid the further deterioration of the structures. Recently fiber sheets are used for strengthening the damaged concrete structures due to its many advantages such as its durability, non-corrosive nature, low weight, ease of application, cost saving, control of crack propagation, strength to thickness ratio, high tensile strength, serviceability and aesthetic. However, the lack of analytical procedures for assessing the nominal moment capacity by the fiber sheet reinforcement leads to difficulties in the effective process of decisions of the factors in the strengthening procedure. In this work, flexural strengthening effects by fiber sheets bonded on bottom face of the member are studied for the reinforced concrete T beam. In addition, auxiliary flexural strengthening effects by U-type fiber sheets bonded on bottom and side faces of the member to prevent delamination of the bottom fiber sheet are theoretically investigated. The analytical solutions are compared with experimental results of several references to verify the proposed approach. It is shown that the good agreements between the predicted results and experimental data are obtained.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.139-145
• /
• 2016

Dumbbell is the most basic topology that can be used in almost all kind of network experiment within it or just by little expansion. While Transmission Control Protocol TCP is the basic protocol that is used for the connectivity among networks and stations. TCP major and basic goal is to provide path and services to different applications for communication. For that reason TCP has to transfer a lot of data through a communication medium that cause serious congestion problem. To calculate the congestion problem, different kind of pre-cure solutions are developer which are Loss Based Variant and Delay Based Variant. While LBV keep track of the data that is going to be passed through TCP protocol, if the data packets start dropping that means congestion occurrence which notify as a symptom, TCP CUBIC use LBV for notifying the loss. Similarly the DBV work with the acknowledgment procedure that is used in when data ACK get late with respect to its set data rate time, TCP COMPOUND/VAGAS are examples of DBV. Many algorithms have been purposed to control the congestion in different TCP variants but the loss of data packets did not completely controlled. In this paper, the congestion control algorithms are implemented and corresponding results are analyzed in Dumbbell topology, it is typically used to analyze the TCP traffic flows. Fairness of throughput is evaluated for different TCP variants using network simulator (NS-2).

• Progress in Medical Physics
• /
• v.16 no.3
• /
• pp.125-129
• /
• 2005

The first step in the commissioning procedure of a treatment planning system is always verification of the basic beam data. In this work, we have measured POD curves and beam profiles between 1 $\times$ 1 cm$^{2}$ and 40 $\times$ 40 cm$^{2}$ . In an attempt, Pinnacle 7.4f detect discrepancies between predicted dose distribution and delivered dose distribution. The discrepancies between measurement data and caculation data was found. The delivered dose was underestimated in field but overestimated out of field. The D$_{max}$ depth of 1 $\times$ 1 cm$^{2}$ was reduced about 2 mm. For the larger field size ($\geq$4$\times$4 cm$^{2}$, the beam profile and PDD curve showed good agreement between measurement data and calculation data.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1818-1827
• /
• 2018

Objective: The objective of this work was to determine the prevalence of the pathologies that caused the condemnation of pig carcasses in an area of intensive pig farming and Mediterranean climatology and to evaluate their influence in a risk-based inspection procedure for slaughterhouses. Methods: A retrospective observational investigation was carried out from 2002 to 2016 into the pathological processes that caused the condemnation of pig carcasses in a slaughterhouse from South-eastern Spain. The seasonal effect on the causes of condemnation carcass was reported. Negative binomial model was used to evaluate the effect of season on the rate of antemortem rejections and post-mortem condemnations. Histopathological examinations were performed to confirm the diagnosis. Results: The risk of antemortem rejections (0.0564%) was significantly greater in summer (risk ratio [RR] = 1.57). Autumn was associated with higher rate (RR = 1.69) of the total postmortem condemnations (0.1046%). Significantly higher rates of pronounced anaemia (0.0111%) were observed in summer (RR = 3.20). The main causes of anaemia were observed gastroesophageal ulcers and haemorrhagic enteropathies. Significantly highest risk of erysipelas (0.0074%) were observed in autumn (RR = 5.485). About other zoonosis, only eight cases (0.0013%) of carcasses were declared unfit due to tuberculosis lesions. Porcine muscular cysticercosis was not detected. Nevertheless, nonspecific causes such as generalized infections and emaciation represented the half of the condemned carcasses (50.90%). Conclusion: The pathologies leading to the condemnation of carcasses in this study can be considered representative of the pathologies that affect the pig population from a region with a high intensive production and Mediterranean climatology because this slaughterhouse receives a lot of animals from many farms of different size in a high intensive pig production zone (Mediterranean region). Increased knowledge of environmental factors that may foment the appearance of the diseases is essential for implementing inspection programs based on risk assessment in pig's slaughterhouses.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.115-131
• /
• 2000

In the study of craniofacial deformity, it is very important that identifying the factor which can affect the morphology and which is closely related to the morphology, because it can not only improve the comprehension of growth and developmental process but also be applied in growth prediction and treatment modality. Several investigators have already mentioned the characterstics of head posture and airway space in relations to morphologic difference. But it is very meaningful work in clarifying the correlation between morphology, head posture and airway space that observing the change of head posture after morplologic change caused by operation and the change of airway space after same procedure. To investigate above correlation, I selected normal group which is consisted of 43 adults and mandibular prognathism group which is consisted of 47 adults who had been operated by sagittal split ramus osteotomy and were followed up more than 1 year. With their lateral skull radiograghs, reference lines which can evaluate each measuring points and areas without effect of postural change were first determined. And using above reference lines, change of airway space, positional change of tongue and hyoid, change of cranial and cervical angulations were measured. The results obtained from the study were as follows 1. In the change of head posture, the position of tongue and hyoid neighboring to pharynx is more closely related to the reference line of cervical column than to reference line of cranium. 2. After mandibular setback operation, the airway dimension was decreased to 81.6% of preoperative state at 1 month postoperatively and was slightly increased to 89.7% at 1 year postoperatively. 3. Posterior movement of tongue plays important role in decrease of airway dimension and inferior movement of hyoid was closely correlated with posterior movement of tongue. 4. Postoperative anterior movement of mandible, namely, morphologic relapse had correlation with relapse phenomenon of airway dimension. 5. Craniocervical angulation increased postoperatively. Especially in the postoperative early state, there was increased foreward inclination of cervical angulation rather than increase of cranial angulation. But at postoperative 1 year it was observed that cervical inclination was returned to preoperative state and cranial angulation was increased gradually. 6. Increase rate of airway dimension was correlated with the increase of cranial angulation from postoperative 1 month to 1 year. In conclusion, relapse tendency of airway dimension following increase of cranial angulation was found after mandibular setback operation and it is considered that increase of cranial angulation is one of compensatory mechanism in airway maintenance.

• Journal of Korea Water Resources Association
• /
• v.40 no.12
• /
• pp.985-994
• /
• 2007

Small hydropower is the one of the cleanest one among new and renewable energy with less green house gas emissions. Recently, the necessity of developing small hydropower is emerging since its remaining potential resources in this country are abundant. However, a survey or research on the small hydropower development has been hardly performed since the 1990#s. These circumstances encourages a systematic approach for the small hydropower development. The purpose of this study is to propose a methodology of the location analysis for developing small hydropower. To this end, constraint and location criteria with weights are established and quantification method of each factor is presented. Especially, the analysis procedure is established on the basis of GSIS. Also the study focus on raising the objectivity and precision of analysis by developing system model with automatic search. The proposed methodology is applied to Bochung stream in Keum Riverbasin. The result selects the four and two locations of dam type and run-of-river type respectively. This study will be beneficial to the future activation of small hydropower development as a fundamental work.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.32-40
• /
• 2010

In this work, the method of acquiring the pupil function of optical system is proposed. The wavefront aberration and the intensity distribution of pupil can be analysed with the pupil function. This system can be adopted to the manufacturing line of optical pickup directly and also has good performance to analysing various property of optical instrument. It is one kind of inverse problem to get pupil functions by 3D beam data. The extended Nijboer-Zernike(ENZ) approach recently proposed by Netherlands research group is adopted to accompany to solve these inverse problem. The ENZ approach is one of a aberration retrieval method for which numerous approaches are available. But this approach is new in the sense that it use the highly efficient representation of pupil functions by means of their Zernike coefficients. These coefficients are estimated by using matching procedure in the focal region the theoretical 3D intensity distribution and measured 3D intensity distribution. The algorithm that can be applied more general circumstance such as high-numerical aperture instrument is developed by modifying original ENZ approach. By these scheme, MS windows based GUI program is developed and the good performance is verified with generated 3D beam data.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.317-324
• /
• 2013

Twitter sentiment analysis is to classify a tweet (message) into positive and negative sentiment class. This study deals with SentiWordNet(SWN)-based twitter sentiment analysis. SWN is a sentiment dictionary in which each sense of an English word has a positive and negative sentimental strength. There has been a variety of SWN-based sentiment feature extraction methods which typically first determine the sentiment orientation (SO) of a term in a document and then decide SO of the document from such terms' SO values. For example, for SO of a term, some calculated the maximum or average of sentiment scores of its senses, and others computed the average of the difference of positive and negative sentiment scores. For SO of a document, many researchers employ the maximum or average of terms' SO values. In addition, the above procedure may be applied to the whole set (adjective, adverb, noun, and verb) of parts-of-speech or its subset. This work provides a comparative study on SWN-based sentiment feature extraction schemes with performance evaluation on a well-known twitter dataset.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.6
• /
• pp.747-761
• /
• 2011

This paper presents an investigation on the change in the statical behavior and the ultimate capacity of steel cable-stayed bridges after cable failure. Cable failure can occur due to fire, direct vehicle clash accidents, cable or anchorage fatigue, and so on. Moreover, the cable may be temporarily disconnected during cable replacement work. When cable failure occurs, the load, that was supported by the broken cable is first transferred to another cable. Then the structural state changes due to the interaction between the girder, mast, and cables. Moreover, it can be predicted that the ultimate capacity will decrease after cable failure, because of the loss of the support system. In this study, the analysis method is suggested to find the new equilibrium state after cable failure based on the theory of nonlinear finite element analysis. Moreover, the ultimate analysis method is also suggested to analyze the ultimate behavior of live loads after cable failure. For a more rational analysis, a three-step analysis procedure is suggested and used, which consisted of initial shape analysis, cable failure analysis, and live load analysis. Using this analysis method, an analytical study was performed to investigate the changes in the structural state and ultimate behavior of steel cable-stayed bridges.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.175-181
• /
• 1993

Radiosurgery requires integral procedure where special devices and computer systems are needed for localization, dose planning and treatment. The aim of this work is to verify the overall mechanical accuracy of our LINAC and develop dose calculation algorithm for LINAC radiosurgery. The alignment of treatment machine and the performance testing of the entire system were extensively carried out and the basic data such as percent depth dose, off-axis ratio and output factor were measured. A three dimensional treatment planning system for stereotactic radiosurgery has been developed. We used an IBM personal computer with C programming language (IBM personal system/2, Model 80386, IBM Co., USA) for calculating the dose distribution. As a result, deviations at isocenter on gantry and table rotation for our treatment machine were acceptable since they were less than 2 mm. According to the phantom experiments, the focusing isocenter were successful by the error of less than 2 mm. Finally, the mechanical accuracy of our three dimensional planning system was confirmed by film dosimetry in sphere phantom.