• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.32-49
• /
• 1996

An approach to providing computational support for concurrent design is discussed in the context of an automobile wiring harness design problem. Key issues include the development of an architecture that supports collaboration among specialists, the development of hierarchical representations that capture different characteristics of the design, and decomposition of tasks to achieve a tradeoff between efficiency and robustness of the system. We present an architecture in which the main design tasks are supported by agents-asynchronous and semi-autonomous modules that automate routine design tasks and provide specialized interfaces for working on particular aspects of the design. The agent communication and coordination mechanisms permit members of an engineering team to work concurrently, at different levels of detail and of different versions of the design. The design is represented hierarchically, with detailed models maintained by the participating agents. In conjunction with the architecture and design representations, issues pertaining to the exchange of information among different views of the design, management of dependencies and constraints, and propagation of design changes are discussed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.70-73
• /
• 2004

The packaging of the integrated circuits requires knowledge of ceramics and metals to accommodate the fabrication of modules that are used to construct subsystems and entire systems from extremely small components. Composite ceramics (Al$_2$O$_3$-SiO$_2$) were tested for substrates. A stress analysis was conducted for a linear work-hardening metal cylinder embedded in an infinite ceramic matrix. The bond between the metal and ceramic was established at high temperature and stresses developed during cooling to room temperature. The calculations showed that the stresses depend on the mismatch in thermal expansion, the elastic properties, and the yield strength and work hardening rate of the metal. Experimental measurements of the surface stresses have also been made on a Cu/Al$_2$O$_3$-SiO$_2$ceramic system, using an indentation technique. A comparison revealed that the calculated stresses were appreciably larger than the measured surface stresses, indicating an important difference between the bulk and surface residual stresses. However, it was also shown that porosity in the metal could plastically expand and permit substantial dilatational relaxation of the residual stresses. Conversely it was noted that pore clusters were capable of initiating ductile rupture, by means of a plastic instability, in the presence of appreciable tri-axiality. The role of ceramics for packaging of microelectronics will continue to be extremely challenging.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.308-312
• /
• 2003

The packaging of the integrated circuits requires knowledge of ceramics and metals to accommodate the fabrication of modules that are used to construct subsystems and entire systems from extremely small components. Composite ceramics ($Al_2O_3-SiO_2$) were tested for substrates. A stress analysis was conducted for a linear work-hardening metal cylinder embedded in an infinite ceramic matrix. The bond between the metal and ceramic was established at high temperature and stresses developed during cooling to room temperature. The calculations showed that the stresses depend on the mismatch in thermal expansion, the elastic properties, and the yield strength and work hardening rate of the metal. Experimental measurements of the surface stresses have also been made on a $Cu/Al_2O_3-SiO_2$ ceramic system, using an indentation technique. A comparison revealed that the calculated stresses were appreciably larger than the measured surface stresses, indicating an important difference between the bulk and surface residual stresses. However, it was also shown that porosity in the metal could plastically expand and permit substantial dilatational relaxation of the residual stresses. Conversely it was noted that pore clusters were capable of initiating ductile rupture, by means of a plastic instability, in the presence of appreciable tri-axiality. The role of ceramics for packaging of microelectronics will continue to be extremely challenging.

• 한국산림과학회지
• /
• 제100권2호
• /
• pp.292-304
• /
• 2011

본 연구는 우리나라의 벌채제도와 외국의 벌채제도를 비교하여 입목벌채 허가제도 개선에 관한 시사점을 도출하는 한편, 벌채업무 담당 그룹(공무원)과 목재벌채 실행그룹(산림소유자, 벌채업자, 산림조합, 산림법인)을 대상으로 입목벌채 제도에 대한 인식 및 활성화 요인 등에 관한 설문조사를 실시하여 제도 개선에 필요한 기초 자료를 제공하고자 수행되었다. 독일과 일본의 벌채제도를 분석한 결과, 산림의 다양한 기능발휘를 저해 할 수 있는 개벌 면적은 축소하고 있는 추세이며, 벌채기준으로 획일적인 벌기령을 적용하지 않고 지역 산림여건을 감안하는 유연한 산림시업의 표준으로서 벌기령을 활용하는 한편, 벌채 후 갱신확보를 위해 지역에 맞는 적절한 갱신방법을 제시하는 벌채제도를 운용한다는 시사점을 도출하였다. 입목벌채 허가제도에 대한 인식 및 활성화 요인 등에 관해 벌채업무 담당 공무원 그룹과 목재벌채 실행그룹을 대상으로 한 설문조사 분석결과, 기준 벌기령은 벌채업무 담당그룹 만이 소나무(3.13)와 삼나무(3.05)의 벌기령이 적정하다는 인식을 보였고 기타 수종의 벌기령은 하향 조정해야 한다는 의견을 보였다. 개벌면적에 대해서는 1 벌구 5 ha 이내, 최대 합계면적 30 ha 한도 기준에 대해서는 벌채 업자와 산림법인 그룹만이 현행보다 확대가 필요하다는 인식을 나타냈다. 현행 벌채제도에 대한 활성화 요인으로는 벌채면적의 확대, 시설지원, 기술교육의 강화, 장비지원 확대, 행정 간소화, 다양한 혜택 부여 등이 제시되었는데, 기술교육 강화가 집단 간의 인식 차이에서 유의수준이 가장 낮게 나타났다.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2018

현행 무선업무 및 무선국 분류체계의 문제점을 분석하고, 일본의 전파관리 사례를 조사하여 합리적이고 효율적인 전파관리 방안을 마련하는 것이 본 연구의 내용 및 범위이다. 본 연구결과를 전파법 시행령, 무선업무 및 무선국종 분류기준 등에 관한 법제도 제개정 시 기초자료로 활용할 수 있다. 향후 새로운 무선업무/무선국의 정의 및 분류체계에 대한 상세한 해설집을 마련하여 실무에서의 정책 순응도를 높이는 한편, 무선국 허가 검사 업무의 정합성 및 효율성 제고에 기여할 수 있을 것으로 기대된다.

• 약학회지
• /
• 제57권3호
• /
• pp.213-218
• /
• 2013

This study examines factors associated with fixed budgets for pharmaceuticals and clawback system for pharmaceutical industry in European countries. We used information from a survey held in 2005~2006 by Austrian Health Institute. Several information including pharmaceutical pricing policies, marketing conditions for pharmaceutical industry and patient' choice of drugs was collected. Five out of twenty five countries in EU were considered as countries with fixed budgets for pharmaceuticals and remaining 20 countries were considered as countries without fixed budget system. Comparisons were made for each information. Countries with fixed budgets for pharmaceuticals were more likely to have internal (or external) reference pricing system and other pricing mechanisms. In addition, they were more likely to permit pharmaceutical industry to be engaged in public advertising and information provision towards patients. They guaranteed patient participation in drug choice decisions. The countries with fixed budgets for pharmaceuticals were more likely to have conditions that enable the fixed budget system to work better compared to those without fixed budget system. Therefore, the study results imply that we need to check whether we have similar conditions to the countries that already have fixed budgets for pharmaceuticals when we want to introduce fixed budget mechanism for pharmaceuticals in Korea in the future.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.37.5-37
• /
• 2002

$\textbullet$ Wearable I/O Devices relieve the restriction of working space to the worker. $\textbullet$ And They permit very active work achievement to the worker. $\textbullet$ But, current Wearable I/O Devices still have some controversial points. $\textbullet$ The worker needs serie system operations to wear and take off devices. $\textbullet$ Also, it is not easy to change any device which is currently used when the worker uses some devices. $\textbullet$ So, we propose the Compact Wireless Communication Module to solve these problem. $\textbullet$ For that purpose, we implemented the proposed module, and proved the efficiency and convenience.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.45-48
• /
• 2003

Over the past few decades, there has been increasing research and commercial activity in invasive and non-invasive biomedical technology. One important challenge to developing these devices involves the increasing density of electrical interconnects. Resistance spot welding is limited in the density of interconnect based on either the size of welding head or the positional precision with which a weld can be made. Development of an automated laser microwelding system would permit the continued advancement of these important biomedical technologies. The objective of this work is to demonstrate the application of pseudo-pulse Nd:YAG laser technology as an alternative to resistance spot welding in performing electrical interconnection within biomedical products. To date, some experiments have been conducted by using a pseudo-pulse 1064 nm Nd:YAG laser, a successful weld of a 25 ${\mu}{\textrm}{m}$ diameter Pt/Ir wire to a 316 stainless steel shim can be made. Another application involves welding clips, which may be used for external interconnection, to electrodeposited nickel domes that make particular interconnections to specific insulated wires within a cable. These results show a great deal of promise for developing such a process.

• Steel and Composite Structures
• /
• 제6권4호
• /
• pp.319-333
• /
• 2006

A rectangular plate made of a porous material is the subject of the work. Its mechanical properties vary continuously on the thickness of a plate. A mathematical model of this plate, which bases on nonlinear displacement functions taking into account shearing deformations, is presented. The assumed displacement field, linear geometrical and physical relationships permit to describe the total potential energy of a plate. Using the principle of stationarity of the total potential energy the set of five equilibrium equations for transversely and in-plane loaded plates is obtained. The derived equations are used for solving a problem of a bending simply supported plate loaded with transverse pressure. Moreover, the critical load of a bi-axially in-plane compressed plate is found. In both cases influence of parameters on obtained solutions such as a porosity coefficient or thickness ratio is analysed. In order to compare analytical results a finite element model of a porous plate is built using system ANSYS. Obtained numerical results are in agreement with analytical ones.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.109-119
• /
• 2018

This study has performed to identify the effect of safety behavior, safety climate and its satisfaction through the Behavior Based Safety Program for 5 sites of the same Company. The study result indicated that the level of recognized safety behavior, climate and its satisfaction improved by conducting observation of worker behavior, jobsite feedback, displaying feedback chart, safety training, behavior modification committee. Additionally, the participation level of safety activity and conformity level of safety rule improved. The recognized level of safety climate improved together with recognized safety value by management, safety participation of direct boss, communication with each other to be dealt with safety matter, safety training material to be contained unsafe behavior and practical hazard, understanding and conducting safety standard. In addition, The recognized level of satisfaction improved together with safety behavior and climate. As a result, this program provided an opportunities to correct worker's unsafe behavior to safe behavior in conjunction with increasing number of observation, providing additional time to have a safety check, safety suggestion to improve work situation and a permit to work rule. It will be integrated into health and safety management system to be able to reduce industrial accident.