• 한국건축시공학회지
• /
• 제16권4호
• /
• pp.331-339
• /
• 2016

건축물의 고층화, 복합화, 대형화에 따라 다양한 공법이 개발되고 있어 주요 공종에 대한 공법 선정의 중요성이 대두되고 있다. 그러나 프로젝트의 특성을 충분히 고려하지 못하고 있고 주요 공법의 선정을 위한 객관적 기준이나 자료 또한 부족한 실정이며, 실무자의 경험과 직관에만 의존하여 선정이 이루어지고 있는 점이 지적되어 왔다. 이러한 문제점을 해소하기 위해 퍼지, AHP, CBR 등 인공지능이론을 이용한 주요 공종의 공법 선정을 위한 다양한 연구가 진행되었다. 그러나 실무에서 공법 선정 시 공종별 특성 및 현장별 조건을 고려하여 주요 공종마다 각기 다른 여러 가지 공법 선정 모델을 적용하기는 어렵다. 이에 본 연구에서는 매트릭스 분석과 선형변환을 이용하여, 실무에서 활용이 용이한 범용적인 성격의 의사결정지원 모델을 제시하고, 사례 연구를 통해 흙막이 공법 선정 과정에 적용하여 연구모델의 정합성을 검증하였다.

• 한국간호교육학회지
• /
• 제20권4호
• /
• pp.628-638
• /
• 2014

Purpose: This study identifies the relation among the essentials of fundamental nursing skills performance (EFNSP), work capability and stress from work experienced by new clinical nurses. Method: This is a cross-sectional descriptive study with a self-reported questionnaire. The subjects were 224 new clinical nurses employed by general hospitals having more than 400 beds. The data, collected from February 10 to March 7, 2014, were analyzed using descriptive statistics, t-tests, ANCOVA, Pearson's correlation analysis and hierarchical linear regression. Results: The highest frequency of EFNSP of new clinical nurses was vital sign measurement (4.74, ${\pm}.89$) and the lowest frequency of performance was Basic CPR & defibrillator application (1.81, ${\pm}.94$). There were significant positive correlations between frequency and confidence of EFNSP (r=.64, p<.001), frequency and work capability (r=.34, p<.001), and confidence of EFNSP and work capability (r=.48, p<.001), but negative correlation stress from work and work capability (r=-.17, p=.009). General characteristics, stress from work, frequency and confidence in EFNSP and stress from work explain 25.1% of work capability. Conclusion: This result suggests the importance of EFNSP education in nursing schools and availability of opportunities to practice EFNSP during the post-graduation waiting period until assignment to a hospital.

• 경영과정보연구
• /
• 제18권
• /
• pp.163-182
• /
• 2006

In social welfare arena field practicum has been an essential instrument and method for social work students to get socialized to the social work professional. However, to whom involve in the actual field practicum-universities(or colleges), institutes - have some difficulties. On the base of community welfare is a clinical approach in this times. To strengthen community welfare policy, the beginning of community welfare committee is such a good opportunity to tackle the problems of the field practicum. This study suggest that the problem of the field training are 1) a guidance of an individual social work institute, 2) the lack of social work institute, 3) the absence of the trainee's sense of values, 4) the bad conditions of the field practicum for social work students in undergraduate courses at the university(or college), and 5) the lack of professionalism for supervisors. This study makes the following social work suggestions to vitalize field practicum in community welfare. It is more likely important to 1) make the law of the field practicum for undergraduate social work courses, 2) make the coordinated programs of the field practicum for undergraduate social work course in community welfare, 3) enlarge the opportunity that a field specialist take further education, 4) support and carry of supervisor reeducation, 5) make the program development of trainee's personal experiences in social work values, and 6) social work professors make a practice in the social work field.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1197-1202
• /
• 2009

Cost allocation on cogeneration is a methodology dividing the input of common cost to electricity cost and heat cost. In the cost allocation methodology of the electricity and heat on a cogeneration, there are energy method, work method, proportional method, benefit distribution method, reversible work method, various exergetic methods, and so on. In previous study, various cost allocation methodologies have been applied and analyzed on a gas-turbine cogeneration producing the 33.1 MW of electricity and the 32.2 Gcal/h of heat, a steam-turbine cogeneration producing the 22.2 MW of electricity and the 44.3 Gcal/h of heat, and combined-cycle cogeneration producing the 314.1 MW of electricity and the 279.4 Gcal/h of heat. In this study, we integrately analyze the results of previous studies and examine the generality and rationality each methodology. Additionally, a new point of view on the values of alternative electricity efficiency and alternative heat efficiency in the previous methodologies was proposed. As the integrated result, we conclude that reversible work method of various common cost allocation methodologies is most rational.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.67-74
• /
• 2010

The fabrication method of aspheric lens is changed from machining to press molding so as to improve the productivity. In the case of the press molding method, the temperature control of the molding die is most impotent, because the temperature of each molding die determines the quality of lens. But any practical method for direct measuring of the lens temperature and the die internal temperature is yet unknown. Besides, in the case of the press molding system in which the heating and pressing and cooing of a die is done at one work station, the cycle time for the system is yet too long. The paper shows an improved structure of radiant sequential system in which the heating and pressing and cooing of dies is done at individual work station so as to cut down the cycle time. To know the die internal temperature, numerical results are given using ANSYS. An experimental radiant sequential system is developed and tested. Finally, the Taguchi method is applied in order to optimize the setting conditions of individual work station.

• 한국건설관리학회논문집
• /
• 제9권6호
• /
• pp.204-215
• /
• 2008

리모델링 공사는 신축공사와 달리 철거공사가 주공정으로 선행되어야 하는데 현행 철거공사는 개략적 수준의 철거관리계획에 의한 생산성만을 강조한 철거 형태로 인해 폐자재 재활용이 되지않고 있어 자원낭비, 환경파괴를 가중 시키고 있으며, 철거작업 중 작업자의 안전과 구조체의 안전등이 전혀 고려되지 않고 철거하는 것이 현실이다. 따라서 친환경 철거공사가 되기 위해서는 프로세스의 개선이 우선 되어야하며 그 단계를 1) 철거관련 조사분석, 2) 철거관리 도서작성, 3) 철거관리 시공계획서작성, 4) 철거시공 및 감리, 5) 철거 후 관리의 5단계로 구분 하였으며, 특히 철거도면 작성으로 표준철거 WBS가 구축되고, 철거장비 및 공법, 폐기물 투하, 철거공정계획 수립이 가능하며 마감재 철거 후 구조체의 안전점검을 실시하므로써 철거중 불가피한 보수보강이 가능하며, 철거완료 Check list 작성에 따라 리모델링 본공사의 Database 활용이 가능하게 되었다. 본 논문에서는 현행리모델링 철거공사 프로세스(AS-IS)의 문제점을 분석하고 개선된 친환경 리모델링 철거공사 프로세스(TO-BE)를 IDEF0 모델을 사용하여 제안하고자 한다.

• 대한인간공학회지
• /
• 제30권6호
• /
• pp.757-764
• /
• 2011

Objective: The aim of this study was to provide a method to improve the compliance and reduce the time by reducing the workload during the model change work. Background: The enterprises are constructing the small quantity batch production system by increasing the number of model change and reducing model-changing. However, the compliance is low because the work is strenuous and high skills are needed, so the system management is facing with many difficulties. Method: After classifying the model change work according to the purposes(preparation, change and adjustment) with the target of mascara filling machine, element tasks time were measured and the motion analysis(therblig symbol) and REBA analysis were performed. The study incorporated 3 independent variables as the number of motion, REBA score and the element time. The dependent variable is the type of element work as preparation, change and adjustment. The statistical test was performed by one-way ANOVA(${\alpha}$ < 0.05). Results: For the preparation, the number of motions appeared in the order of Use(U), Transport Loaded(TL), and Position(P). The order appeared in change is Use(U), Release Load(RL), and Grasp (G). The adjustment appeared in the order of Position(P) and Use(U). The results of average motion time as the element work times divided by the number of motion appeared in the order of adjustment(1.85sec/motion), preparation(1.11sec/motion), and change(0.62sec/motion). The results of REBA showed that the average risk level of change and adjustment were medium, but 53.1% of change and 42.9% of adjustment were evaluated as high. Conclusion: Reducing the avoidance and improving the compliance of work could be expected if the job autonomy were improved by improving the working postures with high risk level. Application: It is expected to solve the problem of reducing the time of model change work in the small quantity batch production system. The future work is to carry out the improvement directions found in the results and compare the results after improvement.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.127-134
• /
• 2008

The purpose of this study is to propose the decision making technique in roof waterproofing method at the early construction stage. Selecting the suitable construction method is difficult because of the complex interrelationships between many factors of influencing the construction method selection. This study presents an example of selecting suitable method by analyzing LCC (Life Cycle Cost) in roof waterproofing work. In this study, roof waterproofing method is analyzed by LCC(Life Cycle Cost) which is consists of the initial costs, running costs, and removal costs. Sheet waterproofing, membrane waterproofing and asphalt waterproofing costs are compared to select the most economic method. The result of this study revealed that considering LCC is useful in selecting the proper method in the construction work.

• Journal of Radiation Protection and Research
• /
• 제30권1호
• /
• pp.17-25
• /
• 2005

원자력 발전의 안정성이 사회적 문제로 제기된 이후 작업종사자에 대한 작업 중 방사선 피폭량에 대한 관심이 높아지고 있다. 현재의 방법에 의하면 방사선 작업 계획의 수립 시 작업 공간 내 선량률이 일정하다는 가정 하에 피폭선량을 예측하므로 작업 경로에 따른 피폭선량의 변화에 대한 고려가 이루어지지 않고 있다. 본 연구에서는 작업자와 선원과의 거리가 고려되 수정된 방사선 피폭량 계산식을 이용하여 방사성 폐기물 저장시설에서의 작업 중 작업경로 변화에 따른 방사선 피폭량을 계산하였다. 이 계산식을 이용하여 주어진 작업 공간과 선원 조건하에서 작업 중 방사선 피폭량을 최소로 하는 최적 작업경로를 탐색할 수 있는 수치해석 알고리즘을 제안하였다. 이를 위하여 2차원 작업공간에서 무한개의 작업경로를 유한개의 경로로 근사화하고 근사화된 모든 작업경로 중 피폭선량이 최소가 되는 작업경로를 탐색하였다. 또한, 3차원 그래픽 기술과 Java 프로그래밍을 이용한 가상작업 시뮬레이션 프로그램을 개발하고 작업 공간의 선량률 가시화 및 가상 작업 시뮬레이션을 수행하여 방사선 작업 계획의 수립을 위한 도구로서의 가능성을 검토하였다. 수치해석 계산과 시뮬레이션 과정을 통하여 최적 작업경로는 작업자와 선원과의 거리를 증가시키고 작업 시간을 단축시킬 수 있는 경로로 제시되었고, 이를 바탕으로 방사선 피폭량은 작업시간뿐만 아니라 작업자와 선원간의 거리에 영향을 받음과 최적화된 방사선 방호를 위해 작업경로가 고려되어야 함을 확인하였다.

• Environmental Engineering Research
• /
• 제9권4호
• /
• pp.168-174
• /
• 2004