• 대한인간공학회지
• /
• 제29권4호
• /
• pp.435-444
• /
• 2010

To identify and evaluate the risk factors in WMSD work, a number of ergonomic workload evaluation methods have been developed. In the legal examination of WMSD risk factors, simple observational workload evaluation methods are widely used instead of using costly measurement equipments such as EMG and motion analyzer. The simple workload evaluation methods can be categorized into three groups; risk factor checklist methods, posture observation methods, and manual material handling task evaluation methods. In terms of the categories, this survey summarized several representative workload evaluation methods and compared them each other. Then some industrial application cases referring each the workload evaluation methods were surveyed. Due to the characteristics of each method, the selection and application procedure of workload evaluation method should be appropriate for the corresponding work. Therefore, some guidelines for the selection and application procedure of workload evaluation method were suggested.

• Architectural research
• /
• 제8권2호
• /
• pp.43-48
• /
• 2006

The appropriate fleet estimation of the excavation equipment is a major factor in the determination of the cost and time requirements of a project. But the decision of what kind of equipment selected is often based on heuristic methods or trial and error in Korea. Thus, this study proposes a prototype model that uses genetic algorithms to select fleet estimation of loaders (backhoe) and trucks used in excavation work. To verify the applicability of this model, the case study was performed. And the result of the genetic model was compared with that of the trial & error method. The use of the genetic model suggested this study required 44days, 2 units of backhoes, 7 units of trucks, and a total cost of 171,839,756 won. With the estimated fleet number of equipment, the minimum cost of excavation work can be calculated, taking account of the time-cost trade-off. By utilizing this prototype model, the efficiency of excavation work can be improved.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.169-171
• /
• 2012

Although work-efficiency of construction machinery is a critical factor for estimating its workable-quantity per unit time, the coefficient figure table presented in the Poom-Sam that is used for Construction Cost Estimation of public sectors in Korea is very subjective for practical usage. In order to suggest objective work-coefficient table for a Tub Grinder, domestic and overseas documentary records were investigated and on-going construction sites were also visited. The research found that the table can be revised by means of detailing down by several factors. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.256-259
• /
• 2004

In the present study, AZ31B sheets has a bad formability in room temperature, but the formability is improved significantly as increasing the temperature because of rolled magnesium alloy sheet has a hexagonal closed packed structure (HCP) and a plastic anisotropy. In this paper, after tensile test in various temperatures, strain rate, show the tensile mechanical properties, yield and ultimate strength, K-value, work hardening exponent(n), strain rate sensitivity(m). As temperature increased, yield, ultimate strength and K-value, work hardening exponent(n) are decreased but strain rate sensitivity(m) is increased. As cross-head-speed increased, yield, ultimate strength and K-value, work hardening exponent(n) are increased. And according to the temperature, how change the plastic anisotropy factor R. In addition, we observed how temperatures and cross-head-speed effect on microstructure.

• 한국컴퓨터정보학회논문지
• /
• 제23권6호
• /
• pp.33-41
• /
• 2018

This study examined the work - family relationship of married women in the digital age centered on avoidance of childbirth. Married women 's age, education level, family members living together, work - family affects the avoidance of childbirth. Also, it is analyzed that similar childbirth avoidance phenomenon occurs in the result of the number of future children. Based on the results of the research, it can be suggested that the support of the family living together, the stable employment of married women, and the family-friendly incentive system will have a positive effect on childbirth.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.99-106
• /
• 2004

In developing criteria for establishing workstation reach limits, it is essential to select the appropriate anthropometric stereotype for solving a specific design problem. The most important factor for comfortable workstation is to eliminate trunk flexion from the neutral (upright) posture. A solution to this design can be developed using population stature and link length data. This paper provides a methodology for design of comfortable workstation using anthropometric stereotype. Application of this methodology can be utilized in various designs for work space including standing and sitting workplace. For the purpose of this study, the data are measured by some parts on body such as stature, arm length, wrist height, elbow height, and shoulder hight. The samples for this study are randomly chosen from university students in Seoul and Kangnung during sixteen months (2003.3-2004.6).

• 대한가정학회지
• /
• 제34권4호
• /
• pp.309-326
• /
• 1996

The purpose of the study was to preset the relationships between role conflict and psychological/physical distress of dual/earner families in Pusan. the questionnaire was composed of socio-economic status, wives' work time, spouse's emotional support scale, husbands' housework participation, role conflict scale, psychologica/physical distress scale. The major findings were as follows : 1. The level of role conflict and psychological/physical distress were higher among wives than among husbands. 2. Role conflict were the most important factor affecting the level of psychological/physical distress directly. 3. Wives' psychological/physical distress were significantly affected by role conflict and socio-economic status directly. Wives' psychological/physical distress were affected by wives' work time, husbands' emotional support, husbands' housework participation indirectly. 4. Husbands' psychological distress was significantly affected by role conflict and husbands' housework participation directly. Husbands' physical distress was significantly affected by role conflict directly. Husbands' psychological/physical distress were affected by wives' work time, wives' emotional support indirectly.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.532-543
• /
• 2004

The present work have been developed the interpretation processor including the behavior of material failure and the separation phenomena under transient dynamic loading (the operation of explosive bolt) using AUTODYN V4.3, SoildWork 2003 and TrueGrid V2.1 programs. It has been demonstrated that the interpretation in ridge-cut explosive bolt under dynamic loading condition should be necessary to the appropriate failure model and the basic stress of bolt failure is the principal stress. The use of this interpretation processor developing the present work could be extensively helped to design the shape and the amount of explosives in the explosive bolt having a complex geometry. It is also proved that the interpretation processor approach is an accurate and effective analysis technique to evaluate the separation mechanism in explosive bolts.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.214-215
• /
• 2013

Recently, Construction industry has been trying to reduce environmental impacts reflecting the global trend 'Green Growth'. However most of previous studies focused on operation & maintenance phases and do not have been approached construction phases. In addition, environmental management factors by project participants are assessed with only weight of factors, overlooking these work difficulty. Therefore This study aims to deducted the critical environmental management factors by project participants considering work difficulty in plan, design and construction phase. The basis data is collected through literature reviews and interview targeting each project participant and analyze these data using importance-difficulty analysis(IDA).

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.245-255
• /
• 2011

A novel single-stage AC/DC converter with the soft-switching characteristic based on interleaving technology and an LLC topology is proposed here. The converter is integrated by an interleaved cell and an LLC cell. Because the components of the system are reduced as a result of integrating, the cost decreases. Since interleaving technology is adopted, the converter can work in a high voltage input state. The LLC topology chosen here ensures that the switches on the primary side work in the ZVS condition and that the diodes on the secondary side work in the ZCS condition, which decreases the switching loss of the system. A theoretical analysis and the design procedures of the proposed converter are proposed and discussed in detail. Simulations and experimental studies with a 100W prototype are done to prove the analysis.