• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.713-716
• /
• 2007

Interests have been focused to the renewable energy because energy cost of fossil fuel increased and global climate change caused by CO2 evolution became severe. To overcome these problems, it is essential to develop the energy conversion technologies of renewable resources. Therefore, production and utilization state of wood and woody waste was firstly investigated and then various technologies (pyrolysis, gasification, and combustion) converting the wood and woody waste to energy were summarized. Some case studies of woody waste utilization in europe was introduced with the policy of EU countries. Economical aspect of woody waste was compared with the current fossil fuels and the energy policy of wood and woody waste was suggested.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.43-47
• /
• 2011

In woody waste separated from municipal solid waste, medium density fiberboard was major contributors with particleboard, paper, plywood and log, with different composition based on collected period. In chemical compositional analysis of woody waste, it was similar to softwood based on carbohydrate composition analysis. Based on the carbohydrate composition, saccharified solution from MWW could be good resource for biorefinery.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.57-60
• /
• 2004

Recently. as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust af the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. The present study purposed to analyze the physical and dynamic characteristics of woody cement boards, which were made by modifying water-cement ratio for each wood inclusion rate based on a hardening-accelerator inclusion rate set in previous studies and, based on the findings. to provide basic data about the physical properties of inorganic boards made of waste wood, in order to Produce woody cement boards using waste wood, which has problems in being used in the manufacturing of woody cement boards.

• 한국자원식물학회지
• /
• 제22권4호
• /
• pp.293-298
• /
• 2009

종자 수확 후 버려지는 산업용 대마를 이용한 목질 펠릿제조 가능성과 제조된 펠릿의 특성을 살펴보았다. 산업용 대마의 성분 분석 결과 활엽수와 비슷한 리그닌 함량과 당구성을 보였으며, 회분 분석 결과 무기물 함량이 0.5% 정도이어서 연료로 사용할 경우 재의 생산량은 크지 않을 것이다. 원소 분석 결과 대기 오염을 유발할 수 있는 질소와 황 함량을 분석한 결과, 황 성분은 전혀 포함하지 않고 있으며, 약간의 질소 성분을 포함하고 있는데 이는 현사시나무와 비슷한 수준이었다. 고위발열량 측정 결과 대마 목부는 현사시나무보다 다소 낮은 값을 나타내었다. 바이오매스 생산량이 큰 대마 목부를 이용하여 제조한 펠릿은 활엽수로 제조한 펠릿과 비슷한 화학적 성질과 발열 특성을 가질 것으로 기대되어 고체연료로서의 이용이 가능할 것으로 사료되었다.

• 한국환경과학회지
• /
• 제21권1호
• /
• pp.97-103
• /
• 2012

Suspended wood waste was being inflow into the dam and the problem of waste disposal has been occurred. In this study, ethanol production using woody floater wastes was performed to estimate value in use for raw material of renewable energy. To achieve the goal, experiments of acid hydrolysis and ethanol fermentation using dam woody floater as raw materials for bioethanol was carried out. In the results of field survey in the chungju dam, kind of woody floater was mainly Japanese larch (Larix leptolepis) and hybrid poplar (Populus tomentiglandulosa). The results of sugar extraction showed that sugar content was higher in Larix leptolepis than Populus tomentiglandulosa. Extracted sugar from wood waste was effective consumed by yeast(P. Stipitis and S cerevisiae). In the experiment consumption of sugar including glucose, galactose and xylose, the consumption rate of S. cerevisiae is faster than that of P. stipitis. and efficiency for ethanol production is higer in S. cerevisiae than P. stipitis. Also it can be confirmed that resource as ethanol production using wood waste was available.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.154-165
• /
• 2020

To assign the functionality of the regenerated fiber from waste MDF(wMDF) made of pitch pine, we examined the dyeing characteristics of natural dyes, sappan wood as a polychromatic natural red series, monochromatic gardenia as a yellow series, and indigo blue series. For nonemordanting dye, the colors of regenerated fiber dyed by sappan wood and gardenia were reddish yellow (YR) and yellow (Y) series, respectively, and dyeing conditions were appropriate a 30 ~ 50 g/L of dyeing materials at 60 ℃ for 60minutes of dyeing time. We obtained regenerated woody dyed fibers (Re-WDF), YR to the red (R) series by premordanting with Al and Cu mordant for sappan wood and the purplish red (RP) series by Fe premordanting. In the case of gardenia, only Y series colors were developed in nonemordanting dye or all three mordants. Indigo dye produced Re-WDF with greenish yellow (GY) tone at 1%, green (G) tone at 3%, and blue (B) tone at 5% concentration or more. Re-WDF with indigo showed the best light fastness followed by sappan wood and gardenia. In particular, the light fastness of Re-WDF with gardenia was very poor. The light fastness was somewhat improved by premordanting(Fe>Cu>Al) both sappan wood and gardenia dyes.

• 한국환경복원기술학회지
• /
• 제18권1호
• /
• pp.153-163
• /
• 2015

The study was conducted to develop ecological restoration method of damaged area in DMZ vicinities. As the material for the ecological restoration, forest soil and trees waste have been used. Forest soils were collected for experiments in Yanggu, Gangwon Province. Effect of ecological restoration was analyzed through germination experiment. Germination experiment was performed using 12 kinds of woody and herbaceous seeds. Woody and herbaceous seed germination in test pot was relatively evenly. Mixed material consisting of forest soil and trees waste seemed a possibility as the material for the restoration. The effects on seed germination were higher in the case of mixing more than 70% by volume ratio of local resources. Total number germinated individuals were different depending on the mixing ratio of soil sampling depth. Individual plants showed different trends depending on the experimental combination. Results of the woody seed germination were affected only in the soil sampling depth. Seed germination of herbaceous received a combined effect on soil sampling depth and mixing ratio.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.43-49
• /
• 1998

The availability of large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethane (PU) foams are prepared with reacting isocyanates and polyols, and are used. in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanediisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate.hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight. of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liquefying woody materials. Liquefying rate was increased with more than 3 % addition of inorganic and organic catalysts and raising reaction temperature more than $150^{\circ}C$. Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted in 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rates. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents have significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted condition.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.39-44
• /
• 2010

순환유동층 연소로에서 폐목질계 바이오매스를 이용한 5 MWe 규모의 발전시설에 대한 경제적 타당성에 대하여 고찰하였다. 초기투자비, 폐목재의 가격, 탄소배출권, 계통한계가격과 같은 주요 변수들이 사업의 경제성에 미치는 영향을 분석하였다. 폐목재를 무상으로 공급하고, 기반투자비용 106.5억원, 계통한계가격 99원/kWh의 기준에서 사업의 내부수익률은 16.67%로 계산되어 사업성이 비교적 높은 것으로 예상되었다. 사업의 수익에 영향을 크게 미치는 인자는 계통한계가격, 가동율, 초기투자비, 폐목가격, 탄소배출권의 순으로 나타났다. 또한 사업 위험도를 관리하기 위하여 판매처를 다양화할 수 있는 방안의 하나로 열판매가 가능한 열병합발전을 고려할 필요가 있는 것으로 판단된다.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.32-42
• /
• 2012

Wood biomass including forest residues, waste wood, and construction residuals has been widely generated in Korea, but forest biomass from the National Forest Management Operation Project plays a big role in generating wood biomass. Unfortunately the promotion policy of woody energy organized by the Forest Service in Korea concentrates more on demand creation rather than on supply expansion. Therefore, in order to utilize insufficient wood resources effectively, it is greatly required to develop uses for maximizing their added value. In particular, more attention to the use of the second generation biomass has been paid in foreign countries because there is a threshold that the first generation biomass cannot produce enough biofuel without threatening food supplies and biodiversity. In Korea, wood pellets are regarded as the alternative clean fuels to oils and coals that emit green house gases into the atmosphere. However, using wood as pellet raw materials can not be an economic way because the value of wood disappears right after burning in the boiler in spite of its contribution to the decrease of carbon emission. Differently from wood pellets, kraft pulping process using woody biomass produces black liquor as a by-product which can be used to generate electricity, bioenergy and biochemicals through gasification. Thus, it can be more economical to make a torrefaction of lignocellulosic biomass such as low-quality wood and agricultural leftovers as raw materials of pellets.