• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.174-179
• /
• 2007

The cutting automation of boat's wooden pattern is strongly required to improve the productivity and quality of boats in leisure boat industry. This paper is concerned with the development of wooden pattern machining technology by the machining center. The leisure boat is designed with a 3 dimensional design s/w. The NC cutting data are generated in a CAM s/w and are verified using verification s/w. The cutting forces are monitored to analyse the cutting process. The surface characteristics of machined surface are investigated at various cutting conditions such as spindle speed, feed speed, the cutting direction of wood, and wood material.

• Conservation Science in Museum
• /
• v.14
• /
• pp.7-12
• /
• 2013

The conservation has been conducted for the fragments of an wooden boat in the Neolithic Age, excavated from Bibong-ri, Changnyeong, Korea. The vacuum-freeze drying have been applied to mostly to the small relics, such as wooden lacquerwares or small wooden goods etc.. Therefore, the large objects like a wooden boats have been treated almost by air-drying after impregnation with aqueous PEG solution. The air-drying is needed to impregnate with PEG aqueous solution during long period and run the risk of the fault generation. This report explain an example adapted for the fragments of the wooden boat by humidity-controlled drying(HCD) with slow adjusting moisture content. We did the chemical pre-treatment, PEG aqueous solution. The concentration of the aqueous solution was increased gradually from 10% to 80%. After the impregnation, the objects were dried by the HCD. The dimensional stability of the fragments after treatment was good.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.762-769
• /
• 2009

A canoe is one of the most popular boats in leisure on the water. Generally canoe has been built by good wooden strips. And canoe built by FRP is used for business recently. But by the users' demands for good quality and the restriction to environmental pollution the wooden canoes are required for personal and canoe building business. The modern wooden canoes were built by the strip construction method are used typically. However it is not suitable for the mass productivity requires effective resource operations and managements of men, materials, times, and price. On this paper the new construction method, called the piling-up laminated construction method, is studied to building a canoe using the piling-up with the laminated wooden plates gives more productivity than the others. First a canoe with various curved surfaces is designed from 3D design system. And the hull of canoe model is divided horizontally to generating the laminated plates that will be converting real wooden plates available from the market and will be routed by the manufacturing machine. After the simulating and analyzing of piling-up with the laminated plates, the canoe is building with less times, less men, less resources, and lower price than other method, avoid of the requirements of additional building tools. On the next paper the constructing of a real canoe using the manufactured wooden plates will be studied.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.5-38
• /
• 2006

Although in Korea there are only three examples of wooden coffins being found in burial mounds - from the Daho-ri, Songhyun-dong, and Munyung tombs, in Japan data on the shape and structure of wooden coffins from the Gofun era is relatively abundant. The wooden coffins of the Gofun era of Japan can be classified into either the dugout log style or the combined boards style according to their method of manufacture. They can also be divided by shape, into such categories as the boat shape, the split bamboo shape, the box shape, and so on. The box shape category can be further divided into the assembled type and the nailed type, according to how the boards are put together. Japanese Umbrella Pine (Sciadopitys verticillata) was favored as coffin-wood in all ages, but during the later Gofun era easily obtained woods such as the Japanese cedar (Cryptomeria japonica) or the Hinoki Falsecypress (Chamaecyparis obtusa) were also used. The coffins found at Daho-ri and Songhyun-dong are similar to the Japanese dugout log style in shape and manufacture, while the king's and queen's coffins excavated at Munyung Tomb are seen to have had direct influence on the appearance of nailed coffins Japan. The coffin in Songhyun-dong 7th mound was originally a dugout log boat. It was probably used for practical reasons such as the bugproof, anti-corrosion qualities of camphor wood, not because of ideological reasons such as in a boat burial (in which the boat takes the deceased to the after world). Because the Changnyong region is inland, where camphor trees do not grow, using an already existing boat may have been the only way to procure a camphor-wood coffin. From historical circumstances, it may be inferred that the camphor trees were imported into Korea from Japan, between which there was much cultural exchange.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.16 no.1
• /
• pp.1-15
• /
• 1980

An underwater recording system was designed to measure the sound spectra of the underwater noises produced by fishing gears in operation. Recorded were noi~es from three types of fishing gears: an anchovy set net, three anchovy boat seine net and a stern trawlnet. Acoustic analysis were made using a heterodyne analyzer, a digital frequency analyzer and a level recorder. The no;'e produced by the anchovy set net was found in the high frequency region of the onset of ambient noise spectrum with a slope of - 6 dB/octave. Here the ambient noise spectrum is higher, though similar in shape, than Knudsen spectrum, and is attributed to the breaking action of the coastal wave. Measured noise spectra during the fishing operations of the anchovy boat seine nets are attributed to the background noise of the sea in the presence of the fishing vessels. The frequency distribution of the noise was 20~5, 000 Hz in the case of two steel anchovy boat seiners, and 20-3,000 Hz in the case of the wooden anchovy boat seiner. The predominant frequency range was 250~350 Hz and maximum sound pressure level was 122 dB (re $1\muPa$) in the case of the steel boat and ] 17 dB in the case of the wooden boat. The noises produced by the trawl fishing gears are remarkably higher than the background noi~e in the presence of the fishing vessel. The frequency distribution of the noi~e was 20-6,300 Hz. The predominant frequency range was 100~200 Hz and maximum sound pressure level was 137 dB ( re $1\muPa$) . The noise spectra were not so much different from that caused by vibrations of the towing cable and the structure of the ground rope of the trawl net towed in an experimental tank.

• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.1
• /
• pp.22-82
• /
• 2000

The ship hull construction materials of fishing boat has changed in order that wooden, steel, and fiber glass reinforced plastic(FRP). The fishing boat made from FRP has increased every year because that materials has proved excellent of the characteries for fishing boats construction members. Recently, FRP tend towards evasion for the pollution of air enviroment. Therefore. the materials of fishing boat construction must be exchanged by another one. Aluminium alloys must be recommended for fishing boats construction mateials because that is light weight and corrosion resisting in the sea water. Regulation of the standard of ship hull construction for aluminium alloys fishing boats did not enact laws in the interior now. Therefore, this regulation was studied by the following items. that is Rudder, Bottom construction, Side hull plate construction, Deck plate construction, piller. Water tight bulkhead, Deep tank, Fish tank, Stern construction, Superstructure, Deck house construction, Hatch, Engine room opening, Hatch opening, Bulwark, Welding and Rivet etc. A study on the regulation will be contributed to enact laws for fishing boat construction of aluminium alloys.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.412-417
• /
• 1992

In full-speed cruising, the airborne sound pressure levels are measured from 11 small fishing boats operated around Cheju Island. In these measurement, 9 measuring positions are selected in each fishing boats. The results of measurements and analyses are as follows: 1. The sound pressure levels in FRP boats are higher than those in wooden boats. 2. The highest sound pressure level is 112dB(A) at the engine room in C boat, while the lowest one is 72dB(A) at the front deck in K boat. 3. The highest sound pressure level is shown to be in the frequency band less than 500Hz. 4. The highest sound pressure level is shown to be in the frequency band less than 500Hz. 5. Through all 9 positions, the sound pressure levels are higher in B and C boat and lower in E and K boats.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.7 no.1
• /
• pp.57-78
• /
• 1970

The Korea inshore fishing boats are the size up to 30G.T., and their construction commonly employs the traditional wide wooden planking. Nevertheless, the hull forms have been developed with chine-type straight-framed sections which give developable surface party, but not on the whole: especially not on the whole portion of the hull are preferable for them. Considering many merits in the boat construction, the author, excluding cases of the FRP construction by hand lay-up or spray-up method and of the ferro-cement construction, finds out no reasons to depart from the chine-type hull forms of a developable surface in future development of their hull forms, too. In this report, the author proposed new designs of the developable hull surface for four typical boats forming the main structure of Korean inshore fishing fleets; 5G.T.-class multi-purpose boat, 10G.T.-class angling and longlining boat, 20G.T.-class drift and gill netters, and 27G.T.-class stow netters, and presented the tank test results on their propulsion resistance. The tank test had two purposes; one is to present the powering schedule of the new designs and the other to investigate the resistance characteristics of this kinds of boat in comparision with those of equivalent round-type boats at operational speed ranges. Between the both types of the boat no material differences in powering are expected. Hence, the author is confident of that saving in the construction cost of the developable hull over that of the round-type boat may result in considerable contribution to the over-all boat economy.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.54-59
• /
• 2004

Experiments were carried out to measure the variation of the compass error on ship's head up bearing by magnetic compass and electromagnetic compass on berthing at the pier in order to obtain a basic information on the utilization of autopilot system using electromagnetic compass in fishing boat. The wooden fishing boat, turned on attracting fish lamps of power consumption 85kW, steering magnetic compass and electromagnetic compass indicated westerly compass error with 7$^{\circ}$ and 13 $^{\circ}$~16$^{\circ}$ respectively. The FRP fishing boat, turned on attracting fish lamps of power consumption 130kW, electromagnetic compass indicated easterly compass error 19$^{\circ}$~23$^{\circ}$. The steel fishing boat, turned on ship's navigation equipments of power consumption 225kW, steering magnetic compass indicated westerly compass error with 16$^{\circ}$. While the difference of compass error using electromagnetic compass indicated westerly compass error with 68$^{\circ}$ on the upper deck when the navigation and fishing equipment turn on compare to turn off the equipment, it had easterly compass error with 16$^{\circ}$, 32$^{\circ}$, 20$^{\circ}$ on the forecastle deck, wheel house and compass deck respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.