• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.1-7
• /
• 2005

Tree species of wooden structural members of the Beomeo Temple were identified based on light and scanning electron microscopic characters in the present study. Of 10 structural members, 9 softwoods and 1 hardwood were identified. Among softwood members, 7 belonged to hard pine of the Sylvestris section, and the remaining 2 to hard pine of other than the Sylvestris section and hemlock of the genus Tsuga, respectively. A single hardwood member was identified as white oak of the Prinus section under the subgenus Lepidobalanus.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.39-44
• /
• 1994

This study was carried out to investigate features pertaining to spiral thickenings, which was considered one of the most important diagnostic values, for wood identification. Species, kind of cells with spiral thickening, and ridge numbers of spiral thickening per axial mm were recorded in 71 families, 144 genera, 316 species of Korean hardwoods. Spiral thickening was observed in 128 of 316 species, about 40.5 % of all the investigated, and classified into 6 types on the basis of distributional patterns and morphological features as follows: 1. Type 1, present throughout all vessel element, which was found in 14 families, 19 genera, 43 species. 2. Type 2, present only in small vessel element, which was found in 18 families, 29 genera, 41 species. 3. Type 3, present both in small vessel element and wood fibers, which was found in 8 families, 17 genera, 29 species. 4. Type 4, present in wood fibers, which was found in 1 family, 1 genus, 1 species. 5. Type 5, present only in tail of vessel element, which was found in 4 families, 5 genera, 9 species. 6. Type 6, being present in vessel element faintly or partially, which was found in 2 families, 3 genera, 5 species.

• Journal of Species Research
• /
• v.7 no.3
• /
• pp.240-247
• /
• 2018

Though several wood decay fungi have been reported in the world-wide, only about 600 wood decay fungi have been reported in Korea to date. Thus, the objective of this study was to secure resources for the wood decay fungi in Korea. We investigated wood decay fungi in Yeoninsan Provincial Park, Korea, and the collected specimens were identified based on ITS sequence analysis. Two species were unrecorded species in Korea: Postia hirsuta (Polyporales, Basidiomycota) and Hyphodontia reticulata (Hymenochaetales, Basidiomycota). Another species was previously reported without detailed description: Ceriporia alachuana (Polyporales, Basidiomycota). Here, we provided additional detailed microscopic features and phylogenetic analysis of these species.

• Journal of Korean Society of Forest Science
• /
• v.10 no.1
• /
• pp.41-45
• /
• 1970

This study was carried out to investigate the identification of the woods of commercially important exotic tree species grown in Korea. The test trees used in this study were selected 21 species grown in Kwangyang and Suwon, Korea. The items of macroscopical features were observed and examined principally on the annual rings, transitions spring to the summerwood, pore types and arrangements, sap and heartwoods, wood colors, odor and tastes, resin ducts, parenchymas, and rays etc. The microscopical features observable in the elements, and their compositions such as vessels, tracheids, wood fibers, ray parenchyma cells, and intercellular cannals were observed and measured. The observed and measured results investigated were synthesized, and accordance with these results macroscopical and microscopical keys were prepared for the wood identification as seen in the text.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.177-183
• /
• 2009

Characteristics analysis and species identification of post were carried out in four old traditional wooden frame houses in Cheongdo-gun. The diameter and height of post, and distance between posts are related with each other. It was considered that the traditional wooden frame houses were constructed according to the diameter and height of post as a basic dimension in distance between posts. Of the wood member samples obtained in the site, softwoods in three old houses and hardwoods in one old house were separated through light microscopy. The hardwoods were found to be Castanea crenata. and softwoods were all identified as Pinus densiflora.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.11-21
• /
• 2005

The purpose of this study was to identify the species of the woods used in the main building (Daewoongjeon) of Bulgapsa temple in YeongGwang. Eighty eight woods sampled were divided into four parts; pillars(21), rafters(19), purlins(16) and other wood elements(12). Four species were identified; Pinus spp. (hard pines; diploxylon), Abies spp., Quercus spp. and Zelkova serrata Makino. Pillars and corner-angle rafters were mainly Zelkova; however, other wood elements were mostly Pinus spp. The high ratio of Zelkova in this building would be ascribed to the preference of this species to pines owing to its superior quality before the late Chosun Dynasty.

• Journal of Ginseng Research
• /
• v.37 no.4
• /
• pp.491-495
• /
• 2013

Wood-cultivated ginseng, including roots in its dried form, is produced in forest land without using artificial facilities such as light barriers. To identify suitable sites for the propagation of wood-cultivated ginseng, factor combination technique (FCT) and linear combination technique (LCT) were used with geographic information system and the results were superimposed onto an actual wood-cultivated ginseng plantation. The LCT more extensively searched for suitable sites of cultivation than that by the FCT; further, the LCT probed wide areas considering the predominance of precipitous mountains in Korea. In addition, the LCT showed the much higher degree of overlap with the actual cultivation sites; therefore, the LCT more comprehensively reflects the cultivator's intention for site selection. On the other hand, the inclusion of additional factors for the selection of suitable cultivation sites and experts' opinions may enhance the effectiveness and accuracy of the LCT for site application.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.68-78
• /
• 2006

The purpose of this study was to estimate the identification of thermophilic hacterial with fermentation of pig manure. To identify the characters of thermophilic bacteria related to fermentation at a high temperature condition, we selected 28 different kinds of original settling thermophilic bacteria that were sampled at different 23 areas. They were distributed 1$1{\times}10^5{\sim}10^8CFU$ at medium and the enzyme activity at $55^{\circ}C$ incubation condition, especially cellulase and a-amylase, were higher than those of $30^{\circ}C$. Partial sequencing data for 165 rDNA region were obtained from 28 samples representing 15 different genera. Bacillus subcilis, one of those bacteria, has endodermic spores at high fermented condition.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.20-28
• /
• 2004

26 wooden relics excavated in Jedeok bay, Jinhae, Gyeongsangnam-do, Korea were identified. Wood species identified were consisted of 7 softwoods and 19 hardwoods. Softwoods identified were hard pines (Pinus spp.), while 19 hardwoods were consisted of 15 Lepidobalanus (Quercus spp.), 1 Cyclobalanopsis (Quercus spp.), 1 Meliosma oldhami Miq., 1 Platycarya strobilacea S. et Z., and 1 Carpinus spp., respectively. The wooden fences were composed of a variety of wood species such as hard pines (Pinus spp.), Lepidobalanus (Quercus spp.), Meliosma oldhami Miq. and Carpinus spp. Wooden members of ship were consisted of Lepidobalanus (Quercus spp.), and parts of ship body were hard pines(Pinus spp.). The other relics that uses were unknown were hard pines (Pinus spp.), Lepidobalanus (Quercus spp,), Cyclobalanopsis (Quercus spp.), and Platycarya strobilacea S. et Z.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.458-474
• /
• 2022

Many methods have been explored to increase the palatability of pine (Pinus merkusii), the most common wood used for termite baiting. However, because of the undersupply of pine in Indonesia, it is crucial to vary the wood species for termite baiting and look for potential alternatives. Furthermore, various studies have shown that baiting time influences the intensity and pattern of termite attacks. Therefore, the present research aimed to study the preferences of subterranean termites and find the ideal baiting time among community wood species from Bogor, West Java, as a baiting alternative to pine. The woods tested were Acacia mangium (acacia), Falcataria moluccana (sengon), Anthocephalus cadamba (jabon), Maesopsis eminii (manii), Swietenia mahagoni (mahogany), Hevea brasiliensis (rubberwood), and P. merkusii (pine). Field tests were carried out based on the American Society for Testing and Materials D 1758-06 at the Arboretum, Faculty of Forestry and Environment, IPB University, with a baiting time of one to six months. The results led to the identification of four species of termites, namely Microtermes sp., Macrotermes sp., Shedorhinotermes sp., and Capritermes sp.. The frequency of termite attacks on the test site reached 93.1%. Rubberwood was the most potential wood bait for subterranean termites, indicated by the highest average weight loss value (65.8%) with a shorter optimal baiting time (up to one month) than that of other tested woods.