• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.459-468
• /
• 2011

The main purpose of this study was to examine the influence of treatment amounts of Slurry Composting and Biofiltration liquid fertilizer (SCBLF) on biomass growth of Yellow poplar (Liriodendron tulipifera) and to compare bioethanol production from the harvested wood. Relative growth rate, biomass production and leaf characteristics were significantly enhanced by SCBLF treatment and medium treatment plot showed highest value. Nitrogen compounds and water content in SCBLF affected to increase chlorophyll contents which led improving biomass production (64.67%) and glucose contents (6.07%) than control. Organosolv and dilute acid pretreatments were preliminarily carried for bioethanol production, and the pretreatment processes were conducted at all the same solid to liquid ratio (1 : 10), reaction temperature ($150^{\circ}C$), preheating time (40 min) and residence time (10 min). The water insoluble solid recovery of Organosolv pretreatment with 1% sulfuric acid as a catalyst was the lowest and that of medium treatment plot was 44.81%. Exchangeable cations in SCBLF might be affected to increase pretreatment effect. The simultaneous saccharification and fermentation process was followed to determine the ethanol production of the pretreated biomass. The highest ethanol production yield based on initial weight was obtained from high treatment plotby Organosolv pretreatment with 1% sulfuric acid (16.11%). But regarding biomass production, medium treatment plot produced most, and bioethanol production was increased by 72.93% than control.

• Journal of Ginseng Research
• /
• v.16 no.2
• /
• pp.138-145
• /
• 1992

Rooting test of 5 species plants in Acanthopanax genus was carried out to see the comparative effect of growth regulators NAA IBA and IAA. And the results are summarized as in the following compendia; (1) When hard and soft-wood cutting from new shoot of 5 species were taken and dipping treated with growth regulators such as NAA IBA and IAA at varied concentration levels their roofings were mostly more superior to the control that untreated. And also treatment of NAA and IBA among treated substances were more effective than IAA. (2) The effects on the rooting number and rate made a great difference according to species of Acanthopanax genus even if the same regulator was treated. (3) Decreasing effects of rooting by high concentration obstacle (especially at 2,000 rpm) of NAA and IBA in other species except A. sieboldianum were mostly serious. On the other hand, that in case of IAA treatment was not risen in most species except A. sessiliflorus.

• Korean Journal of Plant Resources
• /
• v.15 no.3
• /
• pp.269-278
• /
• 2002

To establish the mass propagation methods of Weigela subsessilis,, a promising native plant species for horticultural use, several factors influencing rooting from stem cuttings were evaluated. Softwood cuttings showed best rooting rate, 70~77%, in all the cutting media tested, 2.8 times more than hardwood cuttings in which perlite was best medium. The rooting from hardwood cuttings was promoted by higher concentration of all growth regulators used,500 mg.L$^{-1}$ NAA being the best with 80%. More than 80% of softwood cuttings treated by growth regulators produced roots, especially 100, 500, and 1000mg.L$^{-1}$ NAA producing 97％. Roofings from semi-wood cuttings was enhanced by all the growth regulators, except 1000 mg.L$^{-1}$ concentration in which rooting was reduce. Higher rooting rate was obtained by higher concentration and longer soaking duration of NAA in case of hardwood cutting. Softwood cutting showed 100 ％ rooting by soaking treatment with 500 mg.L$^{-1}$ NAA for 3 min. Rooting rate of semi-hardwood cuttings was promoted by higher concentration and longer soaking with growth regulators, However, the degree of improvement was lower than soft and hardwood cutting.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.6-14
• /
• 2018

This study was carried out with respect to the heat release rate (HRR) properties of building wood. Heat release characteristics were measured using a cone calorimeter (ISO 5660-1) with four kinds of wood. The time to ignition measured after the combustion in $25kW/m^2$ external heat flux was 35 to 55 s. Time to ignition of both lauan and red pine was marked with the most delayed value in each of 54 s, 55 s. The maximum heat release rate ($HRR_{peak}$) was $156.87{\sim}235.1kW/m^2$, and the risk of early fire was highest in spruce. Total heat release of red pine was obtained in the highest value with $114.2MJ/m^2$. The mean effective heat of combustion of Japanese cedar was 19.1 MJ/kg and the highest among the samples. Fire risk of wood by FPI was orderly increased from lauan ($0.2468s{\cdot}m^2/kW$), red pine ($0.2339s{\cdot}m^2/kW$), spruce ($0.2308s{\cdot}m^2/kW$) to Japanese cedar ($0.2231s{\cdot}m^2/kW$). Fire risk of wood by FGI get increased from lauan ($0.5088kW/m^2{\cdot}s$), red pine ($0.5111kW/m^2{\cdot}s$), Japanese cedar ($2.8522kW/m^2{\cdot}s$) to spruce ($3.0662kW/m^2{\cdot}s$). Therefore, the risk of fire on the heat release characteristics of woods were found that spruce and Japanese cedar showed the high value compared with the other specimens.

• Fire Science and Engineering
• /
• v.32 no.3
• /
• pp.19-26
• /
• 2018

Experiments on the combustion characteristics of untreated wood specimens and also treated ones with boric acid and ammonium pentaborate were carried out using a cone calorimeter according to ISO 5660-1 standard. As a result, comparing to untreated specimen, the fire performance index (FPI) of the specimens treated with boron compounds increased by 1.2 to 2.1 times and the fire growth index (FGI) increased by 1.6 to 8.4%. Also, total smoke release rate (TSR) was 9.0 to 28.3% lower than that of the untreated specimen. It is understood that the test specimens treated with the boron compound produces a carbonized layer with a flame retarding effect. The highest CO concentration, 0.01112%, for the untreated specimen was observed at 418 s, but the specimens treated with boron compound decreased 13.2 to 37.5% compared to untreated specimen. Therefore, wood treated with boron compounds is expected to have lower fire hazards and risks.

• The Korean Journal of Mycology
• /
• v.45 no.3
• /
• pp.241-245
• /
• 2017

Chaga mushroom (Inonotus obliquus), which has invaluable medicinal uses, grows only on living trees. To date, it is still harvested from its natural habitat and is not cultivated artificially. We artificially cultivated chaga mushrooms by inoculating its sawdust spawns on Betula platyphylla var. japonica in 2007, and monitored mushroom growth on the inoculated trees for 9 years. The mushrooms grew less than 1 cm per year, with the largest mushroom growing up to 9 cm in the 9 years of study. There was no difference in the growth (diameter at breast height) of trees with viable and non-viable I. obliquus. In conclusion, artificial cultivation of chaga mushroom was successful. Our findings suggest that selection of large B. platyphylla var. japonica as host tree could lead to better I. obliquus productivity. Further improvements of the method are needed to increase the success rate of I. obliquus inoculation.

• The Korean Journal of Mycology
• /
• v.23 no.2 s.73
• /
• pp.105-113
• /
• 1995

The mycelia of Lepista nuda were isolated from the different basidiocarps, collected from the forests of Robinia pseudo-acaciae and mixed forests of R. pseudo-acaciae and Quercus serrata. On the different woods, the growths of mycelia collected were compared with those transferred from Applied Mycology Division, RDA. Also, the measurements of dry weight loss, as growth of mycelia, were correlated to the productions of carbon dioxide on the different wood substrates. The growth of mycelia was observed to be best on the woods of R. pseudo-acaciae; followed by the growth on the woods of Morus alba. The growth rate of mycelia appeared to be various, depending on the different kinds of wood substrates. The soild-cultures of the mycelia on the sawdust of the R. pseudo-acaciae woods and the grains of sorghum and corn were conducted, but the basidiocarps were not obtained from these. Therefore, this mycelium collected was believed to be important as new mushroom utilizing the different woods resources instead of Q. serrata.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.65-72
• /
• 2009

For the breeding purpose, in this study we attempted to select a new Lentinula edodes strain by comparing mycelial growth rate, fruit-body quality and mushroom productivity per substrate weight of hybrid strains with parent strains. Nineteen hybrid strains were made by cross of di-karyotic and mono-karyotic to develop strains suitable for sawdust cultivation of L. edodes. Among the nineteen strains, ten were selected by comparing mycelial growth rate on PDA media and wood rot on sawdust-based substrates. The most mushroom harvesting was achieved by 100 days incubation from KFRI 960, KFRI 961, KFRI 962, KFRI 963, KFRI 964, KFRI 971, KFRI 973 and 125 days from KFRI 968, 970. Experiment of incubation periods with the ten strains showed that there were productivity differences between 100 and 150 days incubations. Through comparison of hybrid strains' mushroom productivity it was found that there was no difference in mushroom productivity through crossing high temperature types with high temperature types, crossing low temperature types with high temperature types and crossing unknown temperature types with high temperature types, but there was difference through crossing middle temperature types with high temperature types. Hybrid strains showed better productivity compared with parent strains. Fruiting temperature type analysis of hybrid strains confirmed that strains of high temperature types have a dominant character.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.103-109
• /
• 2011

This study was conducted to develop mass production method by proper cutting time, and the concentrations of plant growth regulators of Spiraea spp. Plants of hard wood was cut on March 3th, the rooting rate in S. salicifolia and S. cantoniensis was 11.3% comparatively higher than that about 5% in S. trichocarpa, S. miyabei, S. japonica, S. thunbergii and S. fritschiana. The rooting of control was 6.0%, however the $125{\sim}1,000mg{\cdot}L^{-1}$ IBA or NAA for 3 hour soaking was above 15.0% in the S. salicifolia. Therefore soaking in $125mg{\cdot}L^{-1}$ of IBA or NAA solution was recommended before cutting. The proper cutting time for soft wood from May 7 to September 17 in S. trichocarpa, S. cantoniensis, S. prunifolia, and S. thunbergii was September 17 when the soft stem was changed hard and the temperate was proper for rooting, high and low, $25{\pm}3^{\circ}C$ and $18{\pm}3^{\circ}C$. The rooting of September 17 was above 70% in S. salicifolia and S. fritschiana. However, the rooting from middle of May to early August was low below 20% in all the genus of Spiraea.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.618-629
• /
• 2009

The objective of this study was to examine the impact of pruning (P treatment) and transplanting (T treatment) of Acer palmatum on cambial growth and compartmentalization of pruning wounds for one year after treatments. Changes of cambial electrical resistance (CER), sizes of pruning wounds, cambial growth of trunks and stems near the wounds, and total phenols at branch unions during the period were examined using a total of 49 trees. After harvesting, areas of discolored wood behind the wounds, relative proportions of extractives, holocellulose and lignin at branch unions were also determined. CER and the cambial growth of trunk at 30 cm above the ground (TGR) were inversely correlated, and differences of CER and TGR among three treatments were significant. TGRs of control, P treatment and P+T treatment after the treatments were 112.2%, 72.4% and 52.5% of the annual growth for the year before the treatments, respectively. The cambial growth rate of stem (SGR) at 1.5 cm above the branch bark ridge and the closure rate of pruning wound (WCR) for one year after treatments were positively correlated, and WCR of P treatment of 39.8% was significantly higher than that of P+T treatment of 31.8%. Wounds of P+T treatment formed greater discolored area per unit area of pruning wound (D/W Ratio) than those of P treatment significantly. Lower WCR and higher D/W Ratio of P+T treatment suggested less ability of compartmentalizing the wounds than P treatment. Total phenols at branch core of pruning wound for both treatments heightened a month after treatment, and then lowered. The contents at below core of the wound were higher than those at control ones continuously, while they became similar each other at above core. Relatively high phenol contents of the extractives at P+T treatment implied that trees with P+T treatment allocated more energy to compartmentalize their wounds. Holocellulose and lignin contents at the branch core of treated branch unions of both treatments were lower and higher, respectively, than at the same part of the union with living branch, as results of the tree reaction to protection from wounding and microbial invasion.