• Journal of the Korean Wood Science and Technology
• /
• 제43권3호
• /
• pp.287-294
• /
• 2015

본 연구는 4개 산지(유고슬라비아, 이탈리아, 영국, 불가리아)의 24년생 글루티노사오리나무를 대상으로 종압축 및 휨강도 특성을 규명하고, 또한 이들을 생장속도(평균연륜폭)와의 관계도 규명하였다. 압축강도는 $231{\sim}326kgf/cm^2$의 범위였고, 산지 간 차이를 보였다. 세 개 산지는 생장이 좋을수록 압축강도 및 압축영계수는 저하되는 것으로 나타났으나, Yugoslavia산지는 생장이 가장 좋으면서도 가장 높은 강도 값을 나타냈다. 휨강도는 $426{\sim}727kgf/cm^2$의 범위였고, 산지 간 차이가 있었다. 휨강도는 생장이 좋을수록 강도 및 영계수가 커지는 것으로 나타났다. 종자 산지가 다른 글루티노사오리나무 중 유고슬라비아산이 좋은 수고생장과, 다른 산지의 약 2배의 흉고직경을 나타내며, 압축, 휨강도에서도 가장 우수하여 생장과 재질면을 고려했을 때 현시점에서 가장 우수한 품종으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.327-338
• /
• 2014

종자의 산지가 다른 루브라참나무(24년생)를 대상으로 물리 및 역학적 관계를 조사하여 생장속도와 목재의 재질과의 관계를 규명하였다. 생재함수율은 변재보다 심재가 높은 것으로 나타났고, 산지 간에 차이를 나타냈다. 비중의 경우 심재는 생장이 좋을수록 작아지는 경향을 보였고, 변재는 생장이 좋을수록 커지는 관계를 나타냈다. 전수축률은 산지간 차이를 나타냈으며, 생장이 좋을수록 수축률과 T/R율은 높아지는 것으로 나타났다. 압축영계수, 휨강도와 휨영계수 및 충격강도는 산지 간 차이를 보였으며, 생장이 좋을수록 낮아지는 경향을 보였다. 전단강도는 산지 간 차이를 보였으며, 생장이 좋을수록 커지는 경향을 보였다. 경도는 세 단면에서 산지 간 차이를 보였으며, 생장이 좋을수록 커지는 경향을 나타냈다. 5종의 산지가 다른 루브라참나무 중 Bancroft산 종자의 경우가 가장 좋은 수고생장을 보이고, 세 번째의 흉고직경을 나타내며, 압축, 휨, 경도, 전단, 충격강도 모두 우수하여 생장과 재질면을 고려했을 때 현시점에서 가장 우수한 품종으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.295-301
• /
• 2016

본 연구는 4개 종자산지(Yugoslovia, ltaly, United Kingdom, Bulgaria)의 글로티노사오리나무(Alnus glutinosa)를 대상으로 목섬유 길이, 도관 길이 및 직경인 해부학적 성질을 조사하여, 이들의 종자산지 간 및 생장속도와의 관계를 규명하였다. 글로티노사오리나무는 산공재, 계단상천공, 교호상벽공으로 나타났다. 접선단면에서 방사조직 높이는 9~11, 횡단면에서 방사조직 수는 16~26개로 나타났다. 산지 간의 목섬유 길이, 도관 길이 및 직경에서 만재부에서는 차이가 없었고, 조재부에서는 차이가 있는 것으로 나타났다. 3개 산지는 생장이 좋을수록 만재부의 목섬유 및 도관 길이가 짧아지는 것으로 나타났으나, 유고슬로비아산은 생장이 좋으면서 목섬유 및 도관길이도 긴 것으로 나타났다.

• 한국가구학회지
• /
• 제27권2호
• /
• pp.91-95
• /
• 2016

This study was conducted to investigate the relationship between water absorption (or hygroscopic property) and growth rate of rubra oak (Quercus rubra) from 5 different origins of seed (Carleton, Simcoe, Chatham, Bancroft, Unknown). Water absorption at cross section of Quercus rubra was $0.43{\sim}0.92g/cm^2$ and the property was not related with growth rate. Overall equilibrium moisture content of rubra oak were 11.35~11.56% and 15.15~15.83% at $40^{\circ}C$ with 75% and 90% relative humidities, respectively. There was no relationship between growth rate and moisture content(hygroscopy) in rubra oak. Based on the results, Rubra oak can be classified as a low hygroscopic wood grade, and thus might be a good raw material for furniture productions owing to its superior dimensional stability.

• 한국가구학회지
• /
• 제29권1호
• /
• pp.18-23
• /
• 2018

The purpose of this study was to develop wood pots for create Optimum environment of plant growth using unused wood. to prove this, we examined the effects of cycle of water supply and nutrient concentration in wood pots on plant germination rate and growth factors (leaf number, stem diameter and length). The results are as follows. 1) The growth rate was higher at once of 2 days watering period. This suggests that the growth of the plants was better than that of the less water because the larch pots itself has the water retention capacity inside. 2) Germination rate and growth rate were better than other treatment groups when the concentration of nutrient solution was 0.5%. 3) Nitrogen, available phosphoric acid, and potassium showed higher contents than the nutrient - treated soil at 0.5% concentration of nutrient solution. This indicates that the nutrient solution absorbed from the larch affected the soil and plant growth in the inside.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.1-8
• /
• 2015

본 연구는 4개 종자산지(Yugoslavia, Italy, United Kingdom, Bulgary)의 글루티노사오리나무(24년생)를 대상으로 물리적 특성을 조사하여 생장(평균연륜폭)과 목재의 재질관계를 규명하였다. 함수율, 밀도, 수축률 및 T/R비는 모두 산지간에 차이가 없었다. 또한 이런 성질들은 생장과도 관계가 없는 것으로 나타났다. 종자산지가 다른 글루티노사오리나무의 중요한 재질지표인 밀도와 수축률의 경우, 생장의 차이에 따라 밀도와 수축률이 차이가 거의 없는 것으로 나타나, 생장이 우수한 것이 우수품종의 기준일 것으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.421-428
• /
• 2015

본 연구는 5개 종자 산지(Carleton, Simcoe, Chatham, Bancroft, Unknown)의 루브라참나무(Quercus rubra)를 대상으로 해부학적 성질을 조사하여, 이들의 종자산지 간 및 생장속도와의 관계를 규명하였다. 루브라참나무는 환공재로서 공권부는 대형도관이 1~3열로 배열하다가 공권 외부는 소형도관이 방사상으로 배열하였다. 산지 간에는 조재부 목섬유 길이, 조재부 도관의 직경에서만 차이가 있었다. 생장속도와는 목섬유 길이 및 도관요소 직경에서 만재부는 상관관계가 없고, 조재부는 부의 상관이었다. 도관요소 길이는 생장속도와 조, 만재에서 관계가 없었다. 조, 만재부에서의 구성요소 비율은 목섬유, 방사조직은 만재부에서 높았고, 도관요소는 조재부에서 높았다. 방사조직 높이는 11~15개 범위였다.

• Journal of Forest and Environmental Science
• /
• 제39권1호
• /
• pp.27-39
• /
• 2023

Twenty-five Eucalyptus clones (14 E. camaldulensis - EC and 11 interspecific eucalypt hybrid clones - EH) grown in three contrasting sites were evaluated for the growth and few wood traits at 4 years of age. The stability, genotype-site interaction and suitability of these clones for pulp and solid wood industry sectors were studied. Growth of eucalypt clones was significantly higher at site 1 with higher rainfall, but wood density did not differ significantly from lower rainfall sites. Kraft pulp yield (KPY) decreased from sites 1 to 3 based on moisture availability, but not between two groups of clones. Volumetric shrinkage (VS) was significantly higher in EC clones at site 3 with lowest rainfall, but there was no specific trend at other two sites with maximum (site 1) and intermediate (site 2) rainfall. The mechanical traits modulus of rupture (MOR) and modulus of elasticity (MOE) were at par in sites 1 and 2, but significantly lower at the driest site 3. The growth rate had a significant positive correlation with KPY, MOR and MOE and a negative correlation with VS, but no significant impact on wood density in both groups of clones. Genotype×environment interaction (G×E) was evident in most traits due to the difference in response of clones to moisture availability. Since wood density was negatively correlated to KPY, it has to be kept at an optimum level for the profitability of pulp industry. There was no significant difference between EC and EH clones for most traits except VS at site 3. Stability of clones varied across sites in different traits, and hence clones may be selected for deployment at each site by screening for growth, followed by wood density, considering the relationship of growth and density with other traits required by pulp and solid wood industry sectors.

• Journal of the Korean Wood Science and Technology
• /
• 제46권6호
• /
• pp.645-655
• /
• 2018

The use of wood waste as substrate for plant growth exemplifies a strategy for turning waste into resources. The overall objective of this research was to evaluate the effects of wood-based growing media on plant cover in a slope area. Moreover, we tried to find out what physicochemical properties affect plant cover on a slope. For treatments, we tested natural soil, soil mixed with wood-based growing medium (1:1, w/w), and wood-based growing medium by itself. Physical and chemical characteristics were evaluated after four months from the date of treatment application to the experimental slope site. Soil coverage with seedlings of Lespedeza cyrtobotrya was measured for plant growth evaluation. Physicochemical properties were altered by mixing the natural soil with wood-based growing medium. Particularly, soil moisture and organic matter contents were significantly changed in soils treated with wood-based growing medium compared to soil alone. We confirmed that plant coverage rate was high when wood-based growing medium was mixed with the natural soil. There was a significant linear relationship between moisture content and CEC (Cation Exchange Capacity) of all growth media tested and plant coverage. This result was expected, as moisture content tends to increase with organic matter content, such as in wood-based growing medium. In conclusion, the high moisture content of the wood-based growing medium was considered effective for plant growth in the experimental slope site, and this wood-based growing medium provides a means to improve the harmony between the slope and the surrounding environment.