• Wind and Structures
• /
• 제13권1호
• /
• pp.21-36
• /
• 2010

A new full scale testing apparatus generically named the Wall of Wind (WoW) has been built by the researchers at the International Hurricane Research Center (IHRC) at Florida International University (FIU). WoW is capable of testing single story building models subjected up to category 3 hurricane wind speeds. Depending on the relative model and WoW wind field sizes, testing may entail blockage issues. In addition, the proximity of the test building to the wind simulator may also affect the aerodynamic data. This study focuses on the Computational Fluid Dynamics (CFD) assessment of the effects on the quality of the aerodynamic data of (i) blockage due to model buildings of various sizes and (ii) wind simulator proximity for various distances between the wind simulator and the test building. The test buildings were assumed to have simple parallelepiped shapes. The computer simulations were performed under both finite WoW wind-field conditions and in an extended Atmospheric Boundary Layer (ABL) wind flow. Mean pressure coefficients for the roof and the windward and leeward walls served as measures of the blockage and wind simulator proximity effects. The study uses the commercial software FLUENT with Reynolds Averaged Navier Stokes equations and a Renormalization Group (RNG) k-${\varepsilon}$ turbulence model. The results indicated that for larger size test specimens (i.e. for cases where the height of test specimen is larger than one third of the wind field height) blockage correction may become necessary. The test specimen should also be placed at a distance greater than twice the height of the test specimen from the fans to reduce proximity effect.

• 한국재료학회지
• /
• 제26권10호
• /
• pp.577-582
• /
• 2016

$Dy^{3+}$ and $Eu^{3+}$-codoped $SrWO_4$ phosphor thin films were deposited on sapphire substrates by radio frequency magnetron sputtering by changing the growth and thermal annealing temperatures. The results show that the structural and optical properties of the phosphor thin films depended on the growth and thermal annealing temperatures. All the phosphor thin films, irrespective of the growth or the thermal annealing temperatures, exhibited tetragonal structures with a dominant (112) diffraction peak. The thin films deposited at a growth temperature of $100^{\circ}C$ and a thermal annealing temperature of $650^{\circ}C$ showed average transmittances of 87.5% and 88.4% in the wavelength range of 500-1100 nm and band gap energy values of 4.00 and 4.20 eV, respectively. The excitation spectra of the phosphor thin films showed a broad charge transfer band that peaked at 234 nm, which is in the range of 200-270 nm. The emission spectra under ultraviolet excitation at 234 nm showed an intense emission peak at 572 nm and several weaker bands at 479, 612, 660, and 758 nm. These results suggest that the $SrWO_4$: $Dy^{3+}$, $Eu^{3+}$ thin films can be used as white light emitting materials suitable for applications in display and solid-state lighting.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.690-695
• /
• 1996

We have systematically investigated the characterization of V$_{2}$O$_{5}$ thin films as a counter electrode for lithium based complementary electrochromic devices. The V$_{2}$O$_{5}$ thin films were prepared by thermal vacuum evaporation with varing the substrate temperature and film thickness. In electrochromic devices for smart windows, the WO$_{3}$ thin films with 400-800 nm thickness require to be capable of reversibly injection 10-15 mC/cm$^{2}$ of lithium, which is readily accomplished charge-balanced switching in a V$_{2}$O$_{5}$ thin films with 100-150nm thick. The V$_{2}$O$_{5}$ thin films produces considerably small changes in optical modulation properties in the visible and near infrared region(500-1100 nm) compared to the amorphous WO$_{3}$ thin films on 10-15 mC/cm$^{2}$ of lithium injection and the V$_{2}$O$_{5}$ thin films can therefore act as a counter electrode to WO$_{3}$ in a lithium based complementary clectrochromic devices. After 10$^{5}$ coloration/bleaching switching time, the degradation does not occurs and the devices exhibit a stable optical modulation in V$_{2}$O$_{5}$ thin films. It has shown that the injected lithium ion amounts in crystalline V$_{2}$O$_{5}$ thin films with the same thickness is large by 3-5 mC/cm$^{2}$ of lithium compared to the amorphous thin films in the same driving conditions. Therefore, to optimize the device performance, it is necessary to choose an appropriate film thickness and crystallinity of V$_{2}$O$_{5}$ for amorphous WO$_{3}$ film thickness as a working electrode.

• 대한토목학회논문집
• /
• 제37권5호
• /
• pp.927-940
• /
• 2017

산사태는 인도네시아에서 오랫동안 피해가 많은 재해로 최근 기후변화와 산지 주위의 무분별한 도시 개발로 인해 위험이 가중되고 있다. 인도네시아 자바지역은 매년 산사태가 빈번하게 발생하고, 인도네시아 인구 절반 이상이 거주하고 있어 그 피해가 크다. 하지만 이러한 위험한 상황에도 불구하고 산사태 위험지역에 매년 거주하는 주민이 증가하고 있어 산사태 위험지역 및 취약지 분석에 대한 기술이 필요한 상황이다. 이에 본 연구는 인도네시아 자바지역을 대상으로 GIS 기반 공간예측모델을 이용하여 산사태 취약성을 평가하고자 한다. 연구지역의 산사태 발생 위치, 지형, 수문, 토양, 토지피복 등의 지형공간정보 자료를 구축하였고, 공간예측모델로는 Weight of Evidence (WoE), 의사결정트리 알고리즘, 인공신경망을 선정하여 산사태 취약지도를 제작하였다. 세 가지 모델은 각각 66.95%, 67.04%, 69.67%의 예측정확도를 보였다. 본 연구의 결과는 향후 인도네시아 산사태 피해 예방 및 산사태 관련 재난관리정책에 중요한 자료로 사용될 수 있을 것으로 기대한다.

• 전기화학회지
• /
• 제1권1호
• /
• pp.33-39
• /
• 1998

본 연구에서는 전자-선 증발법으로 제조된 비정질의 텅스텐 산화물 박막과 전해질 계면에서 진행되는 전기화학반응을 1 M $LiCLO_4/PC$유기 전해질 계면에서 비정질의 텅스텐 산화물 박막 내부로 삽입된 리튬의 양론 값과 박막 전위의 변화에 대하여 연구하였다. 특히 복소수 임피던스 스펙트럼으로부터 제안된 박막과 전해질 계면의 등가 회로는 리튬의 층간 반응 기구가 텅스텐 산화물 박막/유기 전해질 계면에서 리튬 이온의 전하 전달 현상, 텅스텐 산화물 박막에 리튬의 흡착현상 및 박막 내부로의 리튬의 흡수 및 확산 현상으로 구성되어 있다는 것을 알 수 있었다. 또한 CNLS fitting법에 의하여 시뮬레이션된 $R_{ct},\;C_{dl},\;D$, 및 $\sigma_{Li}$ 등의 열역학 및 속도론적 변수 값 등의 상관 관계로부터,비정질의 텅스텐 산화물 박막의 소. 발색 특성은 이들 변수값과 관련이 있었으며, 특히 $Li_y,WO_3$, 박막 내의 리튬의 몰비 y=0.167및 전극 전위 E=2.25 V(vs. Li)에서 전기 발색의 한계값을 갖는 것으로 조사되었다.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3815-3832
• /
• 1975

This study was made to investigate various engineering properties of earth materials resulting from their changes in density and moisture content. The results obtained in this study are summarized as follows: 1. The finner the grain size is, the bigger the Optimum Moisture Content(OMC) is, showing a linear relationship between percent passing of NO. 200 Sieve (n) and OMC(Wo) which can be represented by the equation Wo=0.186n+8.3 2. There is a linear relationship of inverse proportion between OMC and Maximum Dry Density (MDD) which can be represented by the equation ${\gamma}$d=2.167-0.026Wo 3. There is an exponential curve relationship between void ratio (es) and MDD whose equation can be expressed ${\gamma}$d=2.67e-0.4550.9), indicating that as MDD increases, void ratio decreases. 4. The coefficent of permeability increases in proportion to decrease of the MDD and this increase trend is more obvious in coarse material than in fine material, and more obvious in cohesionless soil than in cohesive soil. 5. Even in the same density, the coefficient of permeability is smaller in wet than in dry from the Optimum Moisture Content. 6. Showing that unconfined compressive strength increases in proportion to dry density increase, in unsaturated state the compacted in dry has bigger strength value than the compacted in wet. On the other hand, in saturated state, the compacted in dry has a trend to be smaller than the compacted in wet. 7. Even in the same density, unconfined compressive strength increases in proportion to cohesion, however, when in small density and in saturated state, this relationship are rejected. 8. In unsaturated state, cohesion force is bigger in dry than in wet from OMC. In saturated state, on the other hand, it is directly praportional to density. 9. Cohesion force decreases in proportion to compaction rate decrease. And this trend is more evident in coarse matorial than in fine material. 10. Internal friction angle of soil is not influenced evidently on the changes of moisture content and compaction rate in unsaturated state, On the other hand in saturated state it is influenced density. 11. Cohesion force is directly proportional to unconfined compressive strength(qu), indicating that it has approximately 35 percent of qu in unsaturated state and approximately 70 percent of qu in saturated state.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.9-14
• /
• 2019

Carrier selective solar cell structure has allured curiosity of photovoltaic researchers due to the use of wide band gap transition metal oxide (TMO). Distinctive p/n-type character, broad range of work functions (2 to 7 eV) and risk free fabrication of TMO has evolved new concept of heterojunction intrinsic thin layer (HIT) solar cell employing carrier selective layers such as $MoO_x$, $WO_x$, $V_2O_5$ and $TiO_2$ replacing the doped a-Si layers on either front side or back side. The p/n-doped hydrogenated amorphous silicon (a-Si:H) layers are deposited by Plasma-Enhanced Chemical Vapor Deposition (PECVD), which includes the flammable and toxic boron/phosphorous gas precursors. Due to this, carrier selective TMO is gaining popularity as analternative risk-free material in place of conventional a-Si:H. In this work hole selective materials such as $MoO_x$, $WO_x$ and $V_2O_5$has been investigated. Recently $MoO_x$, $WO_x$ & $V_2O_5$ hetero-structures showed conversion efficiency of 22.5%, 12.6% & 15.7% respectively at temperature below $200^{\circ}C$. In this work a concise review on few important aspects of the hole selective material solar cell such as historical developments, device structure, fabrication, factors effecting cell performance and dependency on temperature has been reported.

• 유통과학연구
• /
• 제18권4호
• /
• pp.87-96
• /
• 2020

Purpose: In this paper, we provide an illustration of Indonesian youth Social Networking Service (SNS) behavior and its relation to their culinary activity. Specifically, their behavior of culinary activity preferences and also the factors affecting their action of spending their money. Data and methodology: We gathered primary data from stratified random questionnaire survey (406 youth). The gathered data was analyzed using text data mining and statistics using R statistical computing language. Results: 1) We found out why our respondents are interested in following the accounts of SNS food influencers: i.e. visually attracted to the posts, as their reference to find places to dine out, as their reference to try new food menu and to get nostalgic feeling about the food. 2) The respondents decide to actually go to the recommended culinary places because of several factors, specifically, its description (visual and text), location, word of mouth (WoM), the experience of being to that place and price. 3) Important factors affecting culinary spent are income, number of following food influencer account, SNS usage time and their interest when looking at WoM. Conclusions: SNS behavior influences Indonesian youth culinary activity preferences and spent.

• Rapid Communication in Photoscience
• /
• 제4권4호
• /
• pp.82-85
• /
• 2015

Photoelectrochemical cell (PEC) is one of the attractive ways to produce clean and renewable energy. However, solar to hydrogen production via PEC system generally requires high external bias, because of material's innate electronic band potential relative to hydrogen reduction potential and/or charge separation issue. For spontaneous photo-water splitting, here, we design dye-sensitized solar cell (DSSC) and their monolithic tandem cell incorporated with a $BiVO_4$ photoanode. $BiVO_4$ has high conduction band edge potential and suitable band gap (2.4eV) to absorb visible light. To achieve efficient $BiVO_4$ photoanode system, electron and hole mobility should be improved, and we demonstrate a tandem cell in which $BiVO_4/WO_3$ film is connected to cobalt complex based DSSC.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.451-460
• /
• 2013

NOx from the thermal power plants are NO and $NO_2$. This work investigated the chemical/physical characteristics and SCR efficiency of newly prepared catalysts including tungsten ($WO_3$), molybdenum ($MoO_3$) and antimony ($SbO_3$) based on vanadia($V_2O_5$) over titania($TiO_2$). As a result of the examination, the surface area of the catalysts promoted with additional metals was larger and the de-NOx efficiency also was enhanced with temperature. The most efficient catalytst was $V_2O_5/TiO_2-WO_3$(10%) at $200^{\circ}C$. Such a high efficiency could contribute to reduce the ammonia slip.