• International Journal of Internet, Broadcasting and Communication
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2013

Co channel interference and adjacent channel interference of (WiBro) into Wireless LAN (WLAN) in TV White Spaces (TVWS) is evaluated through Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) based on the Monte-Carlo simulation method. As a result, in the case of co channel interference, the minimum distance between WiBro Mobile Station (MS) and WLAN User Equipment (UE) should be 210 m to allow the maximum transmitter power of WiBro UE of 25 dBm. The transmit power of WiBro BS have to be reduced to -4.96 dBm.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.617-618
• /
• 2006

A CMOS quadrature Up-converter for a direct-conversion receiver of 5.15-5.825GHz wireless LAN is described. The Up-converter consists of two sub-harmonic mixers, for I and Q channels, and an LO generation network. In order to decrease the number of inductor, I and Q path are merged. The simulation results including all the parasitics show -17.3dB conversion gain at center and -8 dBv oIP3 while consuming 22.968mW under 1.8V supply. The quadrature Up-converter is under fabrication with the other transmitter blocks in a $0.18{\mu}m$ CMOS technology.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.173-174
• /
• 2006

High power amplifier (HPA), which is used in transmitter of wireless communication systems, usually works in near saturation point in order to achieve maximum efficiency. In this region, HPA can introduce undesirable nonlinear effects. In this paper, we present a polynomial modeling method for efficient techniques to compensate for nonlinear distortion introduced by nonlinear HPA. Proposed polynomial predistorter inverses actual amplifier. Namely, we derive polynomials of amplifiers from analytical method and the electrical parameters in the data sheet of an actual amplifier and then can derive polynomial predistorter by inversing them. It is an effective and a simple method to compensate nonlinear distortion. SSPA(Solid-state power amplifier) is considered. We also analyze the effects of predistortion on the SER performance of communication system with 16-QAM modulation format. The results have shown the efficiency of this model.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.114-115
• /
• 2019

이 논문은 무선 전력 전송을 이용하는 마우스의 급전 패드와 리시버 설계 방법을 제안한다. 마우스의 급전 패드는 코일의 턴간 간격을 불균등하게 조절하여 균일한 자기장을 급전 패드 상에서 얻게 하며, 집전코일은 급전코일과 비교해 크기가 작기 때문에 낮은 결합계수와 품질계수를 가져 원하는 전압을 얻기 어려운데 이를 위해 PCB 코일을 멀티레이어로 제작하고 PCB 패턴의 폭을 조절하여 높은 인덕턴스를 갖게 설계한 후 유한요소해석을 통해 설계한 시스템을 시험했다.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.338-351
• /
• 2013

Multiple-input multiple-output (MIMO) communication may provide high spectral efficiency through the deployment of a very large number of antenna elements at the base stations. The gains from massive MIMO communication come from the use of multi-user MIMO on the uplink and downlink, but with a large excess of antennas at the base station compared to the number of served users. Initial work on massive MIMO did not fully address several practical issues associated with its deployment. This paper considers the impact of channel aging on the performance of massive MIMO systems. The effects of channel variation are characterized as a function of different system parameters assuming a simple model for the channel time variations at the transmitter. Channel prediction is proposed to overcome channel aging effects. The analytical results on aging show how capacity is lost due to time variation in the channel. Numerical results in a multicell network show that massive MIMO works even with some channel variation and that channel prediction could partially overcome channel aging effects.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.965-968
• /
• 2011

A 1.485-Gbit/s video signal transmission system at carrier frequencies of 240 GHz and 300 GHz was implemented and demonstrated. The radio frequency front-ends are composed of Schottky barrier diode subharmonic mixers (SHMs), frequency triplers, and diagonal horn antennas for the transmitter and receiver. Amplitude shift keying with an intermediate frequency of 5.94 GHz was utilized as the modulation scheme. A 1.485-Gbit/s video signal with a high-definition serial digital interface format was successfully transmitted over a wireless link distance of 4.2 m and displayed on an HDTV with a transmitted average output power of 20 ${\mu}W$ at a 300-GHz system.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.283-286
• /
• 2011

Path loss plays fundamental roles in system design, spectrum management, and performance evaluation. The traditional path loss model has a slight inconvenience; it depends on the unknown distance. In this letter, we explore the probability distribution function (PDF) of path loss in an indoor office environment by randomizing out the distance variable. It is shown that the resulting PDF is not Gaussian-like but is skewed to the right, and both the PDF and the moments are related to the size of the office instead of the unknown distance. To be specific, we incorporate the IEEE 802.15.4a channel parameters into our model and tabulate the cumulative distribution function with respect to different room sizes. Through a simple example, we show how our model helps a cognitive spectrum user to infer path loss information of primary users without necessarily knowing their transmitter-receiver distance.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.383-383
• /
• 2004

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.254-264
• /
• 2007

A promising approach to improve the performance of mobile location system is the use of antenna arrays in both transmitter and receiver sides. Using advanced array signal processing techniques, such multiple-input multiple-output (MIMO) communication systems can offer more mobile location information by exploiting the spatial properties of the multipath channel. In this paper, we propose a novel approach to determine the position of mobile terminal based on estimated multipath signal parameters using only one base station in MIMO communication systems. This approach intends to minimize the error occurring from the estimation of multiple paths and gives an optimal estimation of the position of mobile terminal by simultaneously calculating a set of nonlinear location equations. This solution breaks the bottleneck of conventional mobile location systems which have to require multilateration of at least three base stations.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.149-155
• /
• 2020

In this study, we employed Manchester code for illumination control and flicker prevention of the light-emitting diode (LED) used in a visible light communication (VLC) system. In the VLC transmitter, the duty factor of the Manchester code was utilized for illumination control; in the VLC receiver, the spike signal from an RC-high pass filter was utilized to recover the transmitted signal whilst suppressing the 120-Hz noise arising from adjacent lighting lamps. Instead of the clock being transmitted in a separate channel, a syncmark signal was transmitted in front of each data byte and used as the reference time for transforming the Manchester code to non-return-to-zero (NRZ) data in the receiver. In experiments, the LED illumination was controlled in the range of approximately 12-84% of the constant wave (CW) light via changing of the duty factor from 10% to 90%. This scheme is useful for constructing indoor wireless sensor networks using LED light that is flicker-free and presents capability for illumination control.