• 인터넷정보학회논문지
• /
• 제18권6호
• /
• pp.15-23
• /
• 2017

Wireless power transmission (WPT) for wireless charging is currently attracting much attention as a promising approach to miniaturize batteries and increase the maximum total range of an electric vehicle. The main advantage of the laser power beam (LPB) approach is its high power transmission efficiency (PTE) over long distance. In this paper, we present the design of a laser power beam based WPT system, which has a best WPT channel selection technique at the receiver end when multiple power transmitters and single power receiver are operated simultaneously. The transmitters send their transmission channel information via optically modulated laser pulses. The receiver uses the received signal strength indicator and digitized data to choose an optimum power transmission path. We modeled a vertical multi-junction photovoltaic cell array, and conducted an experiment and simulation to test the feasibility of this system. From the experimental result, the standard deviation between the mathematical model and the measured values of normalized energy distribution is 0.0052. The error between the mathematical model and measured values are acceptable, thus the validity of the model is verified.

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1238-1240
• /
• 2009

In the wireless sensor network, cooperative transmission is an effective technique to combat multi-path fading and reduce transmitted power. Relay selection and power allocation are important technical issues to determine the performance of cooperative transmission. In this paper, we proposed a new multi-relay selection and power allocation algorithm to increase network lifetime. The proposed relay selection scheme minimizes the transmitted power and increase the network lifetime by considering residual power as well as channel conditions. Simulation results show that proposed algorithm obtains much longer network lifetime than the conventional algorithm.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.306-309
• /
• 2019

Wireless charging is a technology of transmitting power through an air gap to an electrical load for the purpose of energy dissemination. Compared to traditional charging with code, wireless power charging has many benefits of avoiding the hassle from connecting cables, rendering the design and fabrication of much smaller devices without the attachment of batteries, providing flexibility for devices, and enhancing energy efficiency, etc. A transmitting coil and a receiving coil for inductive coupling or magnetic resonant coupling methods are available for the near field techniques, but are not for the far field one. In this paper, the wireless power transfer (WPT) circuit by using magnetic resonant coupling method with a resonant frequency of 13.45 Mhz for the low power system is implemented to measure the power transmission efficiency in terms of mutual distance and omnidirectional angles of receiver.

• Smart Structures and Systems
• /
• 제10권1호
• /
• pp.1-14
• /
• 2012

Given an object, its positioning in the space is a main concern in structural monitoring and a required feedback in structural health monitoring, structural control and robotics. In addition, to make the sensor unit wireless is a crucial issue for advanced applications. This paper deals with the exploitation of wireless transmission technology to long-term monitoring GPS (Global Positioning System) receivers - like the Leica GMX 902 and the Leica GRX 1200-pro. These GPS receivers consist of five parts: antenna, receiver, user client computer, interface and power supply. The antenna is mounted on the object to be monitored and is connected with the receiver by a coaxial-cable through which the radio frequency signals are transmitted. The receiver unit acquires, tracks and demodulates the satellite signals and provides, through an interface which in this paper is made wireless, the resulting GPS raw data to the user client computer for being further processed by a suitable positioning algorithm. The power supply reaches the computer by a wired link, while the other modules rely on batteries re-charged by power harvesting devices. Two wireless transmission systems, the 24XStream and the CC1110, are applied to replace the cable transmission between the receiver and the user client computer which up to now was the only market offer. To verify the performance and the reliability of this wireless transmission system, some experiments are conducted. The results show a successful cable replacement.

• 인터넷정보학회논문지
• /
• 제16권5호
• /
• pp.11-17
• /
• 2015

웨어러블 센서 시스템에서 사용하는 일반적인 전송 전력 조절 모델에서는 수신 패킷의 RSSI가 Target RSSI Margin을 벗어나면 전송 전력 조절 알고리즘을 이용하여 새로운 전송 전력을 찾는다. 이 때 싱크 노드가 센서 노드에게 새로이 계산된 전송 전력을 전달하기 위해 제어 패킷을 보낸다. 그런데 무선 네트워크의 채널 상태가 좋지 않을 때는 제어 패킷을 많이 소모하면서도 적정 전송 전력을 찾지 못해 에너지 낭비만 하게 된다. 따라서 본 논문에서 무선 네트워크 채널 환경이 안정적이라고 판단되었을 때 전송 전력을 변경하는 새로운 제어 패킷 전송 결정 기법을 제안한다. 제안되는 기법으로 낭비되는 에너지를 줄일 수 있다. 제안하는 기법을 평가하기 위해 본 논문에서는 Binary 전송 전력 조절 알고리즘에 제어 패킷 전송 결정 기법을 적용하고 그 결과를 분석한다. 채널의 상태를 판단하는 방안을 3가지 제안하여 실험하고 결과를 분석한다.

• 한국자기학회지
• /
• 제23권2호
• /
• pp.68-76
• /
• 2013

자기유도형 기반의 무선전력 전송 기술을 이용한 무선충전 기능이 최근 스마트폰 등에 채용되어 주요한 소비자 편의기능으로 자리잡고 있다. 무선전력전송 모듈은 무선전력 전송효율을 개선하고 휴대폰 주요 회로부에 대한 전자기장 간섭을 억제하기 위하여 전자기장 차폐 소재의 사용이 필수적이다. 본 논문에서는 무선전력 전송모듈용 전자기장 차폐 소재의 역할과 기술에 대해 소개하였다. 이와 함께 향후 확산될 중급 전력(mid-power)과 대전력(high-power)영역의 무선전력 전송 응용분야에서 대응 가능한 차폐 소재의 개발 방향을 정리하였다.

• 대한의용생체공학회:의공학회지
• /
• 제29권3호
• /
• pp.187-190
• /
• 2008

This paper presents two dimensional receiving coils to provide hundreds of milli-watt power via inductive link to in vivo robotic capsules, whose orientation are practically undetermined. The wireless power transmission system consists of a transmitter powered by class E power amplifier, and a receiver with three dimensional antenna, rectifier, and voltage regulator. As the 2D lateral antenna construction is more critical for the receiving antenna, two types of 2D antennas are introduced and evaluated by theoretic and experimental analyses. Experimental results verifies that the cross-type construction show better directional performance for receiving power than the cylindrical one for the 2D antenna. The former could deliver the power homogeneously regardless of its orientation, with less than 20 % of variation from the possible maximum power.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.25-28
• /
• 2021

In this paper, we studied smart phone RF wireless charging with 5.8-GHz microwave wireless power receiver. The dc output of the receiver connected to super capacitor and DC-DC converter for charging a smart phone. This configuration stably supplies 5V and current for charging it. Studies show that the more receivers are used at close range, the higher the received voltage values and the larger the capacity of the super capacitor, the longer the charging time. The present 5.8-GHz 1W wireless power transmission system is not enough for charging a smartphone mainly due to the lack of current of the receiver.

• 한국정보전자통신기술학회논문지
• /
• 제5권4호
• /
• pp.206-210
• /
• 2012

본 논문은 최근 주목받고 있는 무선 전력송신 방식 중 자기공명을 이용한 무선전력 송신에 관한 것으로 특히 자기 공명식 무선 전력 송신시 주파수 설계에 관한 것이다. 본 논문에서는 무선 전력 송신 주파수를 설계하기 위한 전력 송수신 시스템의 수학적 모델링을 개발 하였으며, 이를 검증하기 위한 시뮬레이션 모델을 개발하였다. 시뮬레이션은 수학적 모델에 기반한 방법과, 소자기반의 방법을 병용 함으로써 그 신뢰성을 확보하였으며, 시뮬레이션 결과에 대한 고찰을 기술 하였다.

• 한국멀티미디어학회논문지
• /
• 제24권1호
• /
• pp.67-74
• /
• 2021

As IoT(Internet Of Things) devices like a smart sensor have constrained power sources, a power strategy is critical in WSN(Wireless Sensor Networks). Therefore, it is necessary to figure out the residual power of each sensor node for managing power strategies in WSN, which, however, requires additional data transmission, leading to more power consumption. In this paper, a residual power estimation method was proposed, which uses ignorantly small amount of power consumption in the resource-constrained wireless networks including WSN. A residual power prediction is possible with the least data transmission by using Machine Learning method with some training data in this proposal. The performance of the proposed scheme was evaluated by machine learning method, simulation, and analysis.