• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.744-750
• /
• 2020

In this paper, we propose a deep learning based transmit power control (TPC) scheme to improve the spectral and energy efficiency of wireless communication systems. In the wireless communication system, the positions of multiple transceivers follow a uniform distribution, and the performances of spectral and energy efficiency for the proposed TPC scheme are analyzed assuming the Nakagami fading channels. The proposed TPC scheme uses batch normalization to improve spectral and energy efficiency in deep learning based training. Through simulation, we compare the results of the spectral and energy efficiency of the proposed TPC scheme and the conventional one for various area sizes that limit the position range of the transceivers and Nakagami fading factors. Comparing the performance results, we verify that the proposed scheme provides better performance than the conventional one.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.268-277
• /
• 2001

In this paper, the system performance with the convolution code using a Viterbi decoding and the one tap LMS equalizer applied to the OFDM system, which is suitable for IEEE 802.1la wireless LAN in indoor wireless channel, is analyzed through computer simulation. Indoor wireless channel is modeled as Rician fading channel, and QPSK and 16QAM scheme are used for subchannel modulation. In Rician fading channel with the power ratio of the direct path signal to the scattered signals, K=5 dB, BER of $10^{-4}$ is satisfied if the SNRs of the QPSK/OFDM and the 16QAM/OFDM are 8.6 dB and 19.2 dB in hard decision and 5.3 dB and 9.8 dB in soft decision, respectively. Compared with convolution code scheme, it is observed that 16QAM/OFDM system with the one tap LMS equalizer has the performance improvement of 8.6 dB and 2 dB in hard decision and soft decision, respectively.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.5
• /
• pp.1-14
• /
• 1997

We consider transmission beamforming techniques for frequency-division-duplex (FDD) wireless communication systems using adaptive arrays to improve the signal quality of the array transmission link. We develop a simple effective transmission beamforming technique based on an approximated frequency tranlsation (AFT) to derive the tranmsiion beamforming weights from the uplink channel vector. This technique exploits the invariance of the short-time averaged fast fading statistics to small frequency translations. A simple approximate relationship that relates the transmission channel vector to the reception channel vector is derived. We have developed its practical alternative in which the frequency translation of the channel vector is performed at the principal angle of arrival (AOA) of the u;link synthestic angular spectrum instead of the mean AOA. To analyze the performance of the proposed methods, we consider the power loss incurred by applying the estimated channel vector instead of the true downlink channel vector. The performance is analyzed as a function of the mean AOA, the angular spread, the number of elements, frequncy difference between the uplink and the downlink, and the angle distribution. Their performance is also compared with that of the direct weight reuse method and the AOA based methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.41-52
• /
• 2005

In wireless networks there are various errors, caused by multi-path fading and interference between devices which lower the network Performance. Especially, performance of IEEE 802.IS.3 High-Rate WPAN (Wireless Personal Area Network) which is operated in ISM unlicensed frequency band is easily affected by channel errors. In this paper, we propose a scheduling algorithm which takes channel errors into consideration in scheduling asynchronous data traffic. The proposed scheduling algorithm can allocate CTA(Channel Time Allocation) proportionally in accordance with the requested channel time of each device. It also prevents waste of channel time by allocating CTA of the channel-error devices to other channel-error free devices. After recovering from the channel error, the devices are compensated as much as they conceded during channel error status. Simulation results show that the proposed scheduling algorithm is superior to the existing SRPT(Shortest Remain Processing Time) and RR(Round Robin) in throughput and fairness aspects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1187-1194
• /
• 1999

In general wireless mobile channel is modeled as complex random processes having a narrowband spectrum. In this paper, a real-time feneration of fading signals using a DSP chip is described. Real-time simulator is designed so that simulation parameters such as mobile terminal speed, carrier frequency, power ratio of line-of-sight component versus multipath, and variance of received power can be chosen in the window. Design algorithms for the generation of ideal fading signals with a minimum DSP computation and trade-offs are investigated. The accuracy of the statistical characteristics is verified through the comparison of measured results with the theoretical prediction.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.73-82
• /
• 1997

In this paper we analyzed, using Markov modeling, the performance of CSMA/CD over the wireless channel which is characterized by near-far effect, shadowing and Rayleigh fading. The analysis shows that throughput of CSMA/CD is degraded by channel error. However, if capture effect which arises from the randomness of power level of received signal due to the fading phenomena of electromagnetic waves is taken into consideration, the system performance is much improved and the system stability is also made better.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2686-2695
• /
• 1997

The MC-CDMA(multi-carrier code division multiple access) technique is known to be appropriate for high data-rate wireless communications such as mobile multimedia communication due to its robustness to multipath fading and its capability of handing high data rates with a simple one-tap equalizer. In this paepr, the performance of a MC-CDMA cellular system employing antenna arrays at the based station in a fading channel is presented. It is whown that the interference from other users within the cell can be significantly reduced for both reverse link (mobile to base station) and forward link (base station to mobile) using a MC-CDMA with antenna arrays, thus incresig the system's user-capacity. Computer simulations that demonstrate user-capacity improvement of the proposed approach are discussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.71-78
• /
• 2013

Recently, the opportunistic incremental relaying systems have been studied to improve the system performance effectively in wireless fading channel. Most of the performance analysis of the system includes a source-destination direct link. And there are few analysis which consider source-relay-destination indirect paths only. Therefore this paper proposes a transmission protocol which relays the source information using the selected relay from the partial channel information at the first stage in an opportunistic incremental relaying system. If the transmission fails, the selected best relay from the full channel information retransmits the information to the destination incrementally. The performance of the proposed system is derived analytically and verified from Monte Carlo simulation. The derived results can be applied to the system design and the performance estimation of the mobile systems and the bidirectional TV broadcasting systems which adapt an opportunistic incremental relaying system.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.371-383
• /
• 2008

Application of network coding in wireless two-way relay channels (TWRC) has received much attention recently because its ability to improve throughput significantly. In traditional designs, network coding operates at upper layers above (including) the link layer and it requires the input packets to be correctly decoded. However, this requirement may limit the performance and application of network coding due to the unavoidable fading and noise in wireless networks. In this paper, we propose a new wireless network coding scheme for TWRC, which is referred to as soft network coding (SoftNC), where the relay nodes applies symbol-by-symbol soft decisions on the received signals from the two end nodes to come up with the network coded information to be forwarded. We do not assume further channel coding on top of SoftNC at the relay node (channel coding is assumed at the end nodes). According to measures of the soft information adopted, two kinds of SoftNC are proposed: amplify-and-forward SoftNC (AF-SoftNC) and soft-bit-forward SoftNC (SBF-SoftNC). We analyze the both the ergodic capacity and the outage capacity of the two SoftNC schemes. Specifically, analytical form approximations of the ergodic capacity and the outage capacity of the two schemes are given and validated. Numerical simulation shows that our SoftNC schemes can outperform the traditional network coding based two-way relay protocol, where channel decoding and re-encoding are used at the relay node. Notable is the fact that performance improvement is achieved using only simple symbol-level operations at the relay node.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5365-5380
• /
• 2016

Estimation of signal-to-noise ratio (SNR) is an important problem in wireless communication systems. It has been studied for various constellation types and channels using different estimation techniques. Maximum likelihood estimation is a technique which provides efficient and in most cases unbiased estimators. In this paper, we have applied maximum likelihood estimation for systems employing square or cross QAM signals which are undergoing slow flat Rayleigh fading. The problem has been considered under various scenarios like data-aided (DA), non-data-aided (NDA) and partially data-aided (PDA) and the performance of each type of estimator has been evaluated and compared. It has been observed that the performance of DA estimator is best due to usage of pilot symbols, with the drawback of greater bandwidth consumption. However, this can be catered for by using partially data-aided estimators whose performance is better than NDA systems with some extra bandwidth requirement.