• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.261-268
• /
• 2014

This paper presents a electrocardiogram(ECG), electromyogram(EMG), and Photoplethysmography(PPG) signal wireless monitoring system based on Bluetooth Low Energy (BLE). ECG and EMG sensor interface analog front-end circuits are designed by using off-the-shelf parts. Texas Instruments(TI)'s CC2540DK is used for BLE-based communication. Two CC2540DK modules are used as Peripheral and Central nodes. In peripheral device, vital signals are acquired by the analog front-ends and fed to ADC for analog-to-digital conversion. The peripheral transmitts the data through the air to the central device. The central device receive the data and sends them to PC using UART. GUI is designed using Labview for displaying the acquired vital signals. The developed system can be used for future ubiquitous wireless healthcare system based on bluetooth 4.0.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1289-1297
• /
• 2011

Objective of this study was to characterize $PM_{10}$ sources on subway tunnels and development of simple particulate matters measuring device based on wireless sensor network. A new wireless sensor module, PMX, has been designed and manufactured to measure $PM_{10}$ and$PM_{2.5}$ simultaneously. The measurements have been conducted at a specific subway station on the Seoul metro line. The accuracy of the device was verified and compared with commercial measuring device based on weighting method.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1821-1823
• /
• 2006

This paper presents a development of interface device for electro-oculogram(EOG) signal and it's application to the wireless mouse of wearable PC. The interface device is composed of five bio-electrodes for detecting oculomotor motion, several band-pass filters, instrumentation amplifier and a microprocessor. we have first analyzed impedance characteristics between skin and a bio-electrode. since the impedance highly depends on human face, it's magnitude differs from person. this interface device was applied to develop a wireless mouse for wearable PC, as a Bio Machine Interface(BMI). Where in the prompt on PC monitor is controlled by only EOG signals. this system was implemented in a Head Mount Display(HMD) unit. experimental results show the accuracy of above 90%.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.33-39
• /
• 2009

The need for end-to-end security has been increased with the widespread use of mobile devices in wireless internet access applications such as mobile commerce. The WAP1.x has an end-to-end security problem that the message transmitted between the mobile device and the Web server is decrypted inside the gateway within a short time. To overcome this problem, several protocols including WAP2.0 has been proposed. These protocols require that the heavy modules such as TLS or data compression modules should be installed on the mobile device with limited resources. This paper proposes a new WTLSW(WTLS-TLS at Web server) protocol and a new WAP2.0 proxy model in order to ensure end-to-end security between the mobile device and the Web server and to be appropriate for mobile devices with limited resources.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1073-1086
• /
• 2004

Wireless internet is embossed the new keyword of IT technology in the world lately. The wireless internet is the architecture, technology and service to be can taken data communication and internet service using wireless device through connecting internet in the wireless environment. These wireless internet technology is extends the scope of using information with the existing wire internet technology. But, It is necessary to be extend supply of quantitative and qualitative for using wireless internet technology efficiently. For these matters, it is efficient to reuse good qualify contents that is serviced on wire environments. Then, in this paper, design and implement the technique of creating con-tents that is made by the method of compounding parts based on the contents automatic reuse technology over the concept of creating new wireless contents.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.87-94
• /
• 2006

For realizing an ubiquitous home network(uHome-net), various sensors should be able to be connected to an integrated wire/wireless sensor network. This paper describes an application case of applying LonWorks technology being widely used in control network to wire/wireless sensor network in uHome-net and the design and application of LonRF device that consists of a neuron chip including LonTalk protocol, a 433.92MHz RF transceiver, a sensor, and application programs. As an application example of the LonRF device, the LonRF smart badge that can measure the 3D location of objects in indoor environment and interwork with the uHome-net was developed. LonRF device based home network services were realized on the uHome-net testbed such as indoor positioning service, remote surveillance service and remote metering service were realized. This research shows that LonWorks technology based sensor network could be applicable to the control network in an ubiquitous home network and the LonRF device can be used as a wireless node in various sensor networks.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.641-650
• /
• 2006

There has been a continued increase in the complexity of software equipped with wireless mobile devices, due to the introduction of new device functionality and services via network connection. The increasement expected to be accelerated by convergence of telecommunication and broadcasting, and proliferation of telematics and home networking services using wireless mobile devices. The higher the complexity of mobile device software, the higher the necessity of management for the software. As for the global standard of mobile device management technology, OMA DM has been widely adopted by device manufacture and expected to be accelerated its adoption. In this paper, we present a development result of mobile device software release management system ThinkSync DM SoftMan. The implementation details of ThinkSync DM SoftMan are provided in implementation architecture and its working scenario based on the design of ThinkSync DM SoftMan that is summarized in this paper as our previous work. The conformance and performance test of the system are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.466-474
• /
• 2014

According to wireless network technology and mobile processors performance were improved, the small wireless mobile device such as smart phones has been widely utilized. The mobile devices can be used GPS information, thereby the services based on location information was increased. GPS was impossible to provide location information in indoor and signal shading environment, and the tracking systems based on short distance wireless communication are required infrastructure. The IEEE 802.11 based tracking system is possible estimation using APs, however the tracking device is exhausted battery power seriously. In this paper, we propose IEEE 802.11 based low-power tracking system. We reduced power consumption from channel scanning and network connection. For performance evaluation, we designed and implemented the tracking tag device, and measured power consumption of the device. As the simulation result, we confirmed that the power consumption was reduced 46% compare to the standard execution.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.46-49
• /
• 2010

This paper has proposedfor wireless Ad-hoc networks with robust route maintenance schemes. The device feature Bluetooth and/or IEEE 802.11 network interfaces and communicate in a decentralized manner. The nodes have the responsibility of self-organizing so that the network is robust to the variations in network topology due to node mobility as well as the fluctuations of the signal quality in the wireless environment.

• The Magazine of the IEIE
• /
• v.29 no.9
• /
• pp.1020-1020
• /
• 2002

Wireless communication systems will be one of the biggest drivers of semiconductor products over the next decade. Global Positioning System (GPS) and Blue-tooth, HomeRF, and Wireless-LNA system are just a few of RF-module candidate awaiting integration into next generation mobile phone. Motivated by the growing needs for low-cost and multi-band/multi-function single chip wireless transceivers, CMOS technology has been recognized as a most promising candidate for the implementation of the future wireless communication systems. This paper presents recent developments in RF CMOS technology, which is classified into device technology and circuit technology and from them forecasts technology trends in the near future.