• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.1-12
• /
• 1997

The performance of Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) protocol adopted as a draft standard of IEEE 802.11 wireless LAN, is analyzed by using mathematical method based on renewal theory. We introdude three kinds of CSMA/CA protocols basic, stop-and-wait and 4-Way handshake CSMA/CA with their mathematical analysis. First, a network of finite population is considered and then expand to infinite population. We model the CSMA/CA protocol as a hybrid protocol of 1-persistent CSMA and p-persistent CSMA protocol, and verify analaytical results by computer simulation. We have found that 4-Way Handshake CAMA/CA shows better performance than those of other two types of CSMA/CA in case of high traffic load.

• Journal of Information Processing Systems
• /
• v.16 no.5
• /
• pp.1048-1063
• /
• 2020

In this study, we propose a reinforcement learning agent to control the data transmission rates of nodes in carrier sensing multiple access with collision avoidance (CSMA/CA)-based wireless networks. We design a reinforcement learning (RL) agent, based on Q-learning. The agent learns the environment using the timeout events of packets, which are locally available in data sending nodes. The agent selects actions to control the data transmission rates of nodes that adjust the modulation and coding scheme (MCS) levels of the data packets to utilize the available bandwidth in dynamically changing channel conditions effectively. We use the ns3-gym framework to simulate RL and investigate the effects of the parameters of Q-learning on the performance of the RL agent. The simulation results indicate that the proposed RL agent adequately adjusts the MCS levels according to the changes in the network, and achieves a high throughput comparable to those of the existing data transmission rate adaptation schemes such as Minstrel.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2540-2542
• /
• 2002

In recent years, it is a worldwide trend that many power utilities focus their attention to employ up-to-date communication technology to the automation of their power plants and distribution systems. Automation Systems in Korea was installed using twisted pair cable(TPC), power line carrier(PLC), coaxial cable(CA), wireless network(wireless data, TRS and PCS). Among the communication media only Satellite Communication guarantees the reliable communication in case of emergency such as a flood, a heavy snow and an earthquake. It can integrate two-way satellite systems to existent nationwide SCADA controlling points of electric power transmission & distribution system that enables real time remote monitoring and controlling automatically. This paper presents some of design efforts for the satellite communication network as the media of Automation Systems.

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.890-903
• /
• 2019

The single carrier frequency domain equalization (SC-FDE) technology is an important part of the broadband wireless access communication system, which can effectively combat the frequency selective fading in the wireless channel. In SC-FDE communication system, the accuracy of timing synchronization directly affects the performance of the SC-FDE system. In this paper, on the basis of Schmidl timing synchronization algorithm a timing synchronization algorithm suitable for FPGA (field programmable gate array) implementation is proposed. In the FPGA implementation of the timing synchronization algorithm, the sliding window accumulation, quantization processing and amplitude reduction techniques are adopted to reduce the complexity in the implementation of FPGA. The simulation results show that the algorithm can effectively realize the timing synchronization function under the condition of reducing computational complexity and hardware overhead.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.767-770
• /
• 2003

A SiGe HBT MMIC differential VCO has been developed for C-band wireless LAN applications. The VCO produces -6.4 dBm output power at 4.75 GHz. The VCO exhibits a 490 MHz tuning range with control voltage from 0.5 V to 2.5 V. The phase noise of the VCO exhibits -106.5 dBc/Hz at 1 MHz offset from the 4.75 GHz carrier. The total current consumption of the VCO is 10 mA at a supply voltage of 3 V.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.339-342
• /
• 2002

In this paper, the structure of OFDM system is studied, and causes of inter carrier interference (ICI) are analyzed. Based on analysis, this paper shows a technique to prevent a distortion due to nonlinearity of high Power amplifier. The proposed scheme is a predistorter for high power amplifier linearization in orthogonal frequency division multiplexing (OFDM) system used in wireless local area network(WLAN). This is verified by comparing BER characteristics of OFDM system, between used PD and not used PD.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.294-301
• /
• 2013

OFDM technique uses multiple sub-carriers for the data transmission. Therefore, bit error rate increases because of inter-carrier interference caused by nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over multi path fading channels is characterized by small transmission gain in multiple sub-carrier frequency interval. Therefore bit error rate increases because of burst errors. Inter-leaver and convolution error control coding are effective for the reduction of this burst error. Pilot symbol is used for the channel estimation in OFDM systems. However, imperfect channel estimates in this systems degrade the performance. The performance of this convolution coding OFDM systems using inter-leaver, gauged by the bit error rate, is analyzed considering the nonlinear high power amplifier, carrier frequency offset and channel estimation error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2226-2234
• /
• 2016

Orthogonal Frequency Division Multiplexing (OFDM) technique uses multiple sub-carriers for the data transmission. Therefore, Inter Carrier Interference(ICI) is generated because of nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over Doppler fading channels also causes ICI. In OFDMA(Orthogonal Frequency Division Multiplexing Access), multiple sub-carriers are allocated to each user. Therefore, inter carrier interference causes interference to other users. I evaluate the BER performance of OFDMA systems in frequency selective fading channel, considering Multi-User Interference (MUI) owing to the carrier frequency offset, the nonlinear high power amplifier, and the Doppler fading. In the uplink OFDMA, multi-user interference introduces larger BER degradation than in the downlink. I explain the reason and obtain the required characteristics of the nonlinear amplifier and the value of frequency offset for good BER performance. And I also analyze the BER degradation upon Doppler fading channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1136-1142
• /
• 2010

In this paper, we reduced the optical noise interference using the ASK modulation with optoelectronic feedback in a wireless optical system in which a lighting LED is used as a light source. The carrier frequency of 70 kHz was generated internally by the oscillation in the optoelectronic feedback circuit, and the output light was ASK modulated at a data rate of 9.6 kbps by opening and shortening the feedback loop with the input signal. In an environment with adjacent noise lights, the ASK modulation with optoelectronic feedback improved the signal to noise ratio by about 25 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1536-1547
• /
• 1994

This paper presented the implementation and design of narrowband wireless MODEM for packet transmission. The MODEM consists of transmitter, receiver, and the control unit. The BPSK modulation with narrowband filtering is used. The receiver consists of functional modules such as carrier recovery, bit synchronization, lock detector, etc. We evaluated the performance of packet transmission with three MODEM sets implemented in distributed packet radio network. We confirmed the transmission of packetized data through RS232C port of PC. Also, we presented results of experimental data by using measuring instruments. The implemented MODEM in this paper is expected to be useful for the design of wireless LAN system.