• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.227-234
• /
• 2011

The Interest in robotics has been steadily increasing in recent times both in Korea as well as abroad. Research on robots for new and diverse fields is ongoing. This study discusses the current research and development on robot actuator, which are used to control the joints of robots, and focuses on developing more efficient technology for joint control, as compared with the current technologies. It also aims to find means to apply the abovementioned technology to diverse industrial fields. We found that easy and effective control of actuators could be achieved by using ZigBee sensor networks, which were widely being used on wireless communications. Throughout the experiments it is proved that the developed wireless actuator could be used for easy control of various robot joints. This technology can be effectively applied to develop two-legged robots that will be able to walk like human, or even quadruped and hexapod robots. It can also be applied to motors used in industry. In this study, we develop an extremely minimized ZigBee sensor network module that can be used to control various servo motors with low power consumption even if it is long distances. We realized effective wireless control by optimizing the ZigBee antenna, and were able to quickly check the status of relevant Tree node through mutual communication between the servo motors composing the ZigBee sensor network and the main server control modules. The developed Servo Motor with ZigBee sensor network modules can be applied in both robotics as well as for home or factory automation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.883-895
• /
• 2007

In this work, we present the development of a patrol robot which is intended to navigate outdoor rough terrain. Proposed mechanism consists of six legs for overcoming an obstacle, and six wheels for traveling. Also, in order to absorb vibration in rough terrain effectively, the slide-spring system and tubed type tire are adopted to each leg and each wheel. The control system of robot consists of several imbedded boards for management of lots of diverse devices such as sensors designed for rough terrain, motor controllers, camera, micro controller and so on. And the base system of the robot is designed to operate in real time and to surveille in the vicinity of the robot, and the robot system is controlled by wireless LAN connected to GUI-based remote control system, while CAN communication connects the control board and the device controllers for sensors and motor controllers. For operating this robot system efficiently, we propose the control algorithms for autonomous navigation using GPS, stabilization maintenance by posture control, obstacle-avoidance by impedance control, and obstacle-overcoming with interference-avoidance between wheels. The performance of the robot and the proposed algorithms are tested and proved by a set of experiments in outdoor rough terrain.

• Journal of Convergence for Information Technology
• /
• v.9 no.3
• /
• pp.30-35
• /
• 2019

An unattended recording system based on smartphone based image image tracking is rapidly developing. Among the existing products, a system that automatically tracks and rotates the object to be photographed using an infrared signal is very expensive for general users. Therefore, this paper proposes a mobile unattended recording system that enables automatic recording by anyone who uses a smartphone. The system consists of a commercial mobile camera, a servomotor that moves the camera from side to side, a microcontroller to control the motor, and a commercial wireless Bluetooth Earset for video audio input. In this paper, we designed a system that enables unattended recording through image tracking using smartphone.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.11-20
• /
• 2018

Smart devices refer to various devices and control equipment such as health care devices, imaging devices, motor devices and wearable devices that use wireless network communication (e.g., Wi-fi, Bluetooth, LTE). Commercial services using such devices are found in a wide range of fields, including home networks, health care and medical services, entertainment and toys. Studies on smart devices have also been actively undertaken by academia and industry alike, as the penetration rate of smartphones grew and the technological progress made with the fourth industrial revolution bring about great convenience for users. While services offered through smart devices come with convenience, there is also various security threats that can lead to financial loss or even a loss of life in the case of terrorist attacks. As attacks that are committed through smart devices tend to pick up where attacks based on wireless internet left off, more research is needed on related security topics. As such, this paper seeks to design an access control method for reinforced security for smart devices. After registering and authenticating the smart device from the user's smart phone and service provider, a safe communication protocol is designed. Then to secure the integrity and confidentiality of the communication data, a management process such as for device renewal or cancellation is designed. Safety and security of the existing systems against attacks are also evaluated. In doing so, an improved efficiency by approximately 44% compared to the encryption processing speed of the existing system was verified.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1838-1844
• /
• 2011

In this paper, the propulsion control of a high-speed maglev train is studied. Electromagnetic suspension is used to levitate the vehicle, and linear synchronous motors (LSM) are used for propulsion. In general, a low-speed maglev train uses a linear induction motor (LIM) for propulsion that is operated under 300[km/h] due to the power-collecting and end-effect problem of LIM. In case of the high-speed maglev train over 500[km/h], a linear synchronous motor (LSM) is more suitable than LIM because of a high-efficiency and high-output properties. An optical barcode positioning system is used to obtain the absolute position of the vehicle due to its wide working distance and ease of installation. However, because the vehicle is working completely contactless, the position measured on the vehicle has to be transmitted to the ground for propulsion control via wireless communication. For this purpose, Bluetooth is used and communication hardware is designed. A propulsion controller using a digital signal processor (DSP) in the ground receives the delayed position information, calculates the required currents, and controls the stator currents through inverters. The performance of the implemented propulsion control is analyzed with a small maglev train which was manufactured for experiments, and the applicability of the high-speed maglev train will be explored.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.97-105
• /
• 1996

This paper is a study on the implementation of speech recognition mobile robot to which the interactive speech recognition techniques is applied. The speech command uttered the sentential connected word and is asserted through the wireless mic system. This speech signal transferred LPC-cepstrum and shorttime energy which are computed from the received signal on the DSP board to notebook PC. In notebook PC, DP matching technique is used for recognizer and the recognition results are transferred to the motor control unit which output pulse signals corresponding to the recognized command and drive the stepping motor. Grammar network applied to reduce the recognition speed of the recogniger, so that real time recognition is realized. The misrecognized command is revised by interface revision through the conversation with mobile robot. Therefore, user can move the mobile robot to the direction which user wants.

• Physical Therapy Korea
• /
• v.23 no.1
• /
• pp.87-93
• /
• 2016

Background: Posture balance control is the ability to maintain the body's center of gravity in the minimal postural sway state on a supportive surface. This ability is obtained through a complicated process of sensing the movements of the human body through sensory organs and then integrating the information into the central nervous system and reacting to the musculoskeletal system and the support action of the musculoskeletal system. Motor function, including coordination, motor, and vision, vestibular sense, and sensory function, including proprioception, should act in an integrated way. However, more than half of stroke patients have motor, sensory, cognitive, and emotional disorders for a long time. Motor and sensory disorders cause the greatest difficulty in postural control among stroke patients. Objects: The purpose of this study is to determine the effect of visual and somatosensory information on postural sway in stroke patients and carrying out a kinematic analysis using a tri-axial accelerometer and a quantitative assessment. Methods: Thirty-four subjects posed four stance condition was accepted various sensory information for counterbalance. This experiment referred to the computerized dynamic posturography assessments and was redesigned four condition blocking visual and somatosensory information. To measure the postural sway of the subjects' trunk, a wireless tri-axial accelerometer was used by signal vector magnitude value. Ony-way measure analysis of variance was performed among four condition. Results: There were significant differences when somatosensory information input blocked (p<.05). Conclusion: The sensory significantly affecting the balance ability of stroke patients is somatosensory, and the amount of actual movement of the trunk could be objectively compared and analyzed through quantitative figures using a tri-axial accelerometer for balance ability.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2010

In order to control moving facilities on a remote place effectively, it are required to acquire a environment informations such as images where the moving facilities are placed. However, since there is no tools to acquire such informations to the central control system based on the non-networked sensor environments, it is difficult to control the moving facilities remotely. Therefore, we design and implement the Zigbee based image transmission system and communication protocol to control the moving target remotely. The wireless control utilizing the Zigbee protocol is that electrically consumption is more small than the Bluetooth and reliability of data transmission is better. The implemented Zigbee based control systems and communication protocol have the normal and replay function for a realtime control of the moving target under the server PC and the mobile FDA with the WiFi protocol. The functional operability and performance are analyzed by a designed prototype under the wireless home network environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1127-1134
• /
• 2017

In this study, the robot arm control system was implemented that is operated by human hands, which can be used in environments that are inaccessible to humans. This function has to be sent to the robot's arms after extracting coordinates of human hands. Through mapping and bluetooth communication we use a leap motion sensor with infrared light and Image recognition sensor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1480-1484
• /
• 2004

In this paper, a self-propulsive and small concrete floor finishing trowel robot with twin trowels is proposed. Due to the small size and omni-directional moving capability, it is adequate for small space such as apartment. By adjusting the posture of trowels, it can move in any direction without wheels. We used cheap PIC processor for the cost saving design of the modules and adopted mode processors for easy operation of control stick. For the position control of the robot, we made a motion control algorithm appealing to the stepping motor driver module and the wireless communication module between the robot and PC (or control stick). In this paper, we discuss the control problem of the floor finishing robot in order to move to the right position. By comparing experimental result with simulation, we show the validity of the robot mechanism, sensors, and the control system.