• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1031-1038
• /
• 2005

As the research on home network technologies, sensor network technologies, and ubiquitous network technologies makes rapid progresses, wireless ad-hoc network have attracted a lot of attention. A wireless ad-hoc network is a temporary network formed by a collection of wireless mobile nodes without the aid of my existing network infrastructure or centralized administration, and it is suitable for ubiquitous computing environments. In this paper, we suggest an interconnection scheme between the wireless ad-hoc network environment based on multiple path source routing protocol and a Mobile-IP based network environment. This scheme reduces the overhead of route re-establishment and re-registration by maintaining multiple paths between the mobile host in wireless ad-hoc network and the base station in mobile-IP network. Also it puts the base station in charge of function that performs translation between wireless ad-hoc network packets and Mobile-IP packets, reducing the load of mobile hosts. In this paper, our simulations show that our scheme outperforms existing interconnecting schemes with regards to throughput and end-to-end delay Also we show that our scheme outperforms multi-paths approach using disjoint routes with regards to routing overhead.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.107-115
• /
• 2005

For effective IP based service implementation on the wireless network environments, wireless network including the ITS network have to support QoS guaranteed protocol such as a RSVP. RSVP is a resource reservation protocol for Internet environment, and its scalability makes easy to implement RSVP over the various IP transport technologies. But for the If based ITS wireless network environment, RSVP is not suitable, since by its path setup procedure characteristic. In the wireless access network for ITS service, when a mobile node moves to other domain it must perform registration procedure. But the registration procedure is time consuming steps, so if a RSVP session was already established in the previous domain, the RSYP session may be disconnected and the time to re establish a new RSVP session is long enough to cause serious packet loss. In this paper, we propose a pre-path reservation mechanism for applying the RSVP in wireless access networks for ITS. In the pre-path reservation mechanism, the resource reservation procedure occurred during a mobile node's handoff time. An access point in wireless access network performs this procedure when the mobile node attempts handoff The access point executes pre-path reservation procedure as a proxy, since the mobile node does not have IP address until the address allocation procedure is finished in a new domain.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.959-975
• /
• 2011

Wireless mesh networks enlarge the wireless coverage area by interconnecting relatively stationary wireless routers (mesh routers). As wireless mesh networks are envisioned to provide high-bandwidth broadband Internet service to a large community of users, the Internet gateway, which acts as a central point of Internet attachment for the mesh networks, is likely to suffer heavily from the scramble for shared wireless resources because of aggregated traffic toward the Internet. It causes performance decrement on end-to-end transmissions. We propose a scheme to balance the load in a mesh network based on link quality variation to different Internet gateways. Moreover, under the mesh coverage, mobile nodes can move around and connect to nearby mesh routers while still keeping the connections to the Internet through the best gateway in terms of link quality. In this structure, gateways perform the balancing procedure through wired links. Information about gateways and mobile node's location is distributed appropriately so that every mesh router can quickly recognize the best gateway as well as the positions of mobile nodes. This distributed information assists mobile nodes to perform fast handoff. Significant benefits are shown by the performance analysis.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.777-787
• /
• 2005

In this paper, we propose an urgency- and efficiency-based wireless packet scheduling (UEPS) algorithm that is able to schedule real-time (RT) and non-real-time (NRT) traffics at the same time while supporting multiple users simultaneously at any given scheduling time instant. The UEPS algorithm is designed to support wireless downlink packet scheduling in an orthogonal frequency division multiple access (OFDMA) system, which is a strong candidate as a wireless access method for the next generation of wireless communications. The UEPS algorithm uses the time-utility function as a scheduling urgency factor and the relative status of the current channel to the average channel status as an efficiency indicator of radio resource usage. The design goal of the UEPS algorithm is to maximize throughput of NRT traffics while satisfying quality-of-service (QoS) requirements of RT traffics. The simulation study shows that the UEPS algorithm is able to give better throughput performance than existing wireless packet scheduling algorithms such as proportional fair (PF) and modified-largest weighted delay first (M-LWDF), while satisfying the QoS requirements of RT traffics such as average delay and packet loss rate under various traffic loads.

• Journal of KIISE:Information Networking
• /
• v.32 no.5
• /
• pp.603-614
• /
• 2005

The wireless LAN environment using Mobile IP is constructed and managed to be connected with Ethernet based wired networks. However, there have been many problems with wireless networks using Mobile IP. Some important facts on network performance have not been considered when introducing wireless LAN by Mobile IP to wired networks. In this paper, we suggest schemes which can solve problems on Handover latency caused by the asymmetrical connectivity of the Access Router at applying the HMIPv6 and on binding updates due to the MN frequent movement. Our proposed schemes can reduce network latency by using the HMIPv6 architecture with a virtual router layer, and reduce communication overhead by interchanging information of the MN movement between routers. Our schemes are expected to assist in constructing a more real and effective wireless LAN environment based on the HMIPv6 and FMIP.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.273-278
• /
• 2007

In the next generation wireless mobile network, various methods are studied to offer interworking and mobility between various radio networks. To offer these harmoniously, network adaptation methods based on IP is generalized, and specifications of host-based mobility method with Mobile IPv4 and Mobile IPv6 to offer IP's mobility are defined in IETF specially. However, it is insufficient to satisfy quality of service that should be offered in wireless mobile network environment. Alternatively studies about Network-Based Mobility of Proxy Mobile IPv4, Proxy Mobile IPv6 etc. are preceded. This paper presents optimum plan that can offer mobility in the next generation radio transfer communication network by comparing and analyzing IP mobility methods divided by Host-based Mobility and Network-based Mobility.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1692-1698
• /
• 2010

In this paper we use wireless sensor network and ultrasonic sensors to estimate local position of mobile robots, and to navigate it. Ultra sonic sensor is simple and accurate so it is good to use in local estimation and navigation of mobile robots. But to obtain accurate distance of two sensors they need to face each others as possible as they can. To solve this problem we rotate ultra sonic sensor which is attached to robot in 360 degrees and obtain accurate distance. We can estimate precise position of mobile robot by triangulation using obtained distance information. A mobile robot navigates using embedded encoder and compensates its coordinates by ultrasonic sensors. Results of Experiments show proposed method obtains accurate distance between sensors and coordinates of position of robot. And mobile robots can navigate designated path well.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1913-1914
• /
• 2006

Modem Industrial control systems tend to adopt a variety of intelligent wireless device controllers to interface front-end computers with active components of the industrial device. Some of the intelligent control systems come equipped with a wireless SMS(Simple Message Service) interface giving an opportunity to use fault alarm Interlock system. Immediately send warning or alert messages to Mobile devices or remote users. Real time monitoring the SMS systems by Mobile devices. Control systems remotely by mobile devices in emergency situation. In order to provide against system fault, SMS Mobile System will enable system administrator to promptly access, monitor and control the system whenever users want and wherever users are, by utilizing wireless Internet and mobile devices. This paper presents the Mobile SMS system for PAL Control System.

• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.218-225
• /
• 2007

As the research on home network technologies, sensor network technologies, and ubiquitous network technologies makes rapid progresses, wireless ad-hoc network have attracted a lot of attention. A wireless mobile ad-hoc network is a temporary network formed by a collection of wireless mobile nodes without the aid of any existing network infrastructure or centralized administration, and it is suitable for ubiquitous computing environments. In this paper, we suggest an extension scheme of a wireless mobile ad-hoc network based on limited multiple paths source routing protocol. This scheme reduces the overhead of route re-establishment and re-registration by maintaining link/node non-disjoint multiple paths between mobile hosts in a wireless mobile ad-hoc network or a mobile host in a wireless mobile ad-hoc network and a base station supporting fixed network services. By maintaining multiple paths, our scheme provides short end-to-end delay and is reliable extension scheme of a wireless mobile ad-hoc network to a fixed network. In this paper, our simulations show that our scheme outperforms existing schemes with regards to throughput and end-to-end delay. Also we show that our scheme outperforms multi-paths approach using disjoint routes with regards to routing overhead.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.107-115
• /
• 2009

Traditionally, simulation method is used to test and evaluate the performance of communication protocol or functional elements for mobile communication service. In this paper, wireless network simulator is implemented using the C++ object-oriented programming language. This simulator can simulate wireless data services, like as ad-hoc networks, by considering the user's mobility. In this paper, the simulator includes network traffic model to reflect wireless data service and traffic source model to represent a user's mobility similar to real service environment and traffic characteristics can be reflected on the simulation, and also more accurate simulation results can be got through that. In addition, by using object-oriented techniques, new service feature or environment can be easily added or changed so that the developed mobile communication simulator can reflect the real service environment all the time. This simulator can be used in adjusting the characteristics of wireless data hosts following the mobility of the user, and also can be used in building new wireless ad-hoc network routing protocols.