• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.371-372
• /
• 2006

A 10Mbps optical wireless link using LED array has been demonstrated. The modulation bandwidth of the LED has been measured, and the transmission test according to modulation frequency has been also carried out. The good communication performance has been obtained at about 30cm distance at 10Mbps data rate.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.102-106
• /
• 2013

A cooperative navigation method for cooperative flight of UAVs is proposed. The commonly used navigation method for UAVs is based on GNSS measurements. However, when it is not available by jamming or other causes, an alternative method is needed. In this paper, it is shown that UAVs equipped with inertial sensors, passive sensor and wireless communication link can perform accurate navigation through sharing information with each other. Firstly, the appropriate roles for sensors and wireless communication link are assigned. Secondly, a filter to perform navigation cooperative is constructed. Finally, the boundedness of estimation error of the filter under small initial estimation error is analyzed. The simulation results show that the proposed method can reduce navigation errors effectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.2
• /
• pp.156-162
• /
• 2017

This paper investigates two-hop extension communication in wireless body area networks. Many previous studies have demonstrated that two-hop extended topology outperforms single-hop topology. Although many researchers have proposed using two-hop extension communication to improve link reliability, no one has considered using a relay selection algorithm or provided a suitable solution for wireless body area networks. The design goal of the proposed algorithm is selecting a proper relay node to retransmit failed packets distributively. The proposed algorithm configures the carrier sensing period to choose one relay node promptly without requiring additional interaction. We analyze the link conditions corresponding to various body postures and investigate which factors are proper to determine the carrier sensing period. The empirical results show that the proposed algorithm reduces the expected number of transmissions required to deliver a packet successfully.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.958-961
• /
• 2007

Recently, research and deployment have been very active on wireless mesh technologies. Wireless mesh networks extends the coverage of the WLAN easily and economically. Although existing protocols developed for MANET and WSN can be used for wireless mesh WLANs, considerable amount of research are still required, because they exhibit poor performance, when applied as they are, due to a few critically different requirements This paper examine research issues on physical and link layers of WLANs considering those requirements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1903-1911
• /
• 2016

As interest in MANET is increasing nowadays, research upon an efficient MANET routing protocol is actively under way. A LQA(Link Qualty Aware)-AODV routing protocol to deal with frequent changes of topology and wireless link variations under tactical operating conditions is proposed in this paper. The suggested LQA-AODV takes into account the channel capacity of each hop during the route request process of the traditional AODV protocol. In detail, LQA-AODV adds a channel capacity cost value to the RREQ message format that occurs during the routing process of the existing AODV Routing Protocol causing the accumulated channel capacity cost values of each sections to be compared before establishing a route. To verify the performance of LQA-AODV, NS2.35 was utilized and the Link-Quality Model was applied in order to reflect the tactical wireless environment. The simulation compares and analyzes LQA-AODV and the existing AODV, showing a large improvement over the traditional AODV in regards to the Packet Delivery Ratio, and End-to-End Delay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.571-573
• /
• 2018

Wireless sensor networks have unbalanced energy consumption due to the convergence structure in which data is concentrated to sink nodes. To solve this problem, in the previous research, the relay node was placed between the source node and the sink node to merge the data before being concentrated to the sink node. However, selecting a relay node that does not consider the link quality causes packet loss according to the link quality of the reconfigured routing path. Therefore, in this paper, we propose a link cost calculation method for data reliability in routing path reconfiguration for relay node selection. We propose a link cost estimation formula considering the number of hops and RSSI as the routing metric value and select the RSSI threshold value through the packet transmission experiment between the sensor modules.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10A
• /
• pp.839-846
• /
• 2011

Link Adaptation should select the best modulation and coding scheme (MCS) which gives the highest throughput as channel conditions vary. Several link adaptation algorithms for wireless local area network (WLAN) have been proposed but for the future WLAN systems such as 802.11n system, these algorithms do not guarantee the best performance. In this paper, we propose a new link adaptation algorithm in which an MCS level is chosen by the received SNR plus the offset value obtained from the transmission results. The performance of proposed algorithm is simulated by an IEEE 802.11n system. From the analysis, we conclude the proposed algorithm performs better than the well-known link adaptation algorithms such as auto rate fallback and general SNR-based techniques. Particularly, the proposed algorithm improves throughput when the packet error ratio (PER) is constrained for fast fading channels.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.456-469
• /
• 2009

We develop a new wireless link quality metric, ECOT(Estimated Channel Occupancy Time) that enables a high throughput route setup in wireless mesh networks. The key feature of ECOT is to be applicable to diverse mesh network environments where IEEE 802.11 MAC (Medium Access Control) variants are used. We take into account the exact operational features of 802.11 MAC protocols, such as 802.11 DCF(Distributed Coordination Function), 802.11e EDCA(Enhanced Distributed Channel Access) with BACK (Block Acknowledgement), and 802.11n A-MPDU(Aggregate MAC Protocol Data Unit), and derive the integrated link metric based on which a high throughput end-to-end path is established. Through extensive simulation in random-topology settings, we evaluate the performance of proposed link metric and present that ECOT shows 8.5 to 354.4% throughput gain over existing link metrics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2387-2394
• /
• 2016

It is important to select the most appropriate channel for efficient transmission of massive data in wireless sensor network. In the fixed channel method for wireless sensor node, shortage of frequency may be a major constraint to support a variety of environments. In this paper, the method that seeks common channels between two nodes without common control channels in the existing wireless cognitive radio network is introduced in order to use efficiently the channel of wireless sensor network. The problem of existing method shows the severe degradation of performance that is caused by interference of linkage between selected channels, so that the sequential algorithm is suggested to improve the performance. From the results of computer simulation, the suggested method shows that the link can be set 50% faster than the other methods as the number of links increases because the beacon packet waiting time caused by the interference decreases remarkably.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1532-1538
• /
• 1999

In general, because error rate of wireless link is higher than that of wired link, DLC layer protocol for wired network with low error rate is not proper for wireless environments. In addition, the conventional DLC layer protocol for wireless network is optimized for the low-speed data service, so it is difficult to use conventional DLC protocol in the current mobile communication environments handing high-speed and multimedia services. Therefore, a DLC layer protocol that is suitable to current wireless communication environments is required. In this paper, we propose a novel error control scheme that supports a variety of traffic attribute and is applicable to high-speed and multimedia data service in WATM. The proposed scheme provides enhanced throughput performance for real-time traffic by using modified ASR ARQ without ACK and reduces loss rate by using FEC in the case of high error condition. Also, for non real-time traffic, the use of ASR ARQ without ACK enhances throughput performance and delay time is decreased by using FEC in the case of high error rate channel. As a result of simulation, the proposed scheme has better performance than conventional ASR ARQ protocol in view of delay and throughput.