• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.155-159
• /
• 2004

This paper describes the design and the simulation of a single pole double throw(SPDT) FET switch for wireless LAN(IEEE802.11a ＆ IEEE802.11b) applications using drain impedance transformation network with Microstrip transmission line. At the receiving path insertion losses were from 0.8(㏈) to 1.462(㏈) between 2(㎓) and 4(㎓), from l.26(㏈) to 2.3(㏈) between 4.7(㎓) and 6.7(㎓) and the isolations were under 30(㏈) between 2(㎓) and 6.7(㎓). At the transmitting path insertion loss were from 1.18(㏈) to 2.87(㏈) between 2(㎓) and 4(㎓) from 0.625(㏈) to 1.2(㏈) between 4.7(㎓) and 6.7(㎓) and the isolations were under 30(㏈) between 2(㎓) and 6.7(㎓).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.396-401
• /
• 2017

In this paper, we propose a solution for interference with Bluetooth when connecting Bluetooth and other devices. The random frequency hopping technique is a technique of generating a hopping pattern using the entire Bluetooth channel without considering the interference of the wireless LAN. The proposed adaptive frequency hopping technique is a technique for generating a hopping pattern of Bluetooth channel considering periodic carrier sensing of Bluetooth and considering WLAN interference. Simulation results show that the use of adaptive frequency hopping reduces the packet error rate as the Bluetooth carrier sensing interval decreases even in the congestion of WLAN interference. Especially, the frequency hopping technique improves the average packet error rate by about 13% compared to the adaptive frequency hopping technique.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.1-9
• /
• 1999

In this paper, the performance of HIPERLAN(HIgh PErformance Radio Local Area Networks) CAC(Channel Access Control) of ETSI(European Telecommunication StandaTds Institute) in Europe, as High speed wireless LAN, is analyzed and estimated by mathematical approaches. The CAC protocol of HIPERLAN is the EY-NPMA(Elimination Yield-Nonpreemptive Priority Multiple Access) which is transmitted after prioritization, elimination and yield phase. We analyzed channel contention phase composed of elimination and yield phase and then throughput is inspected by simulation. This result is useful to design and implement of HIPERLAN protocol.

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.846-853
• /
• 2009

This paper presents the design of a high efficiency frequency multiplier with load-pull simulation and analyses the nonlinear distortion of the frequency multiplier. The frequency multiplier shows serious distortion of multiplying signal bandwidth because of nonlinearity when modulated signal is applied, so a digital predistortion with look up table (LUT) is applied to compensate for the distortion of the frequency multiplier. The frequency multiplier is designed to produce 5.8GHz output by doubling the input frequency to be operating at IEEE 802.11a standard wireless LAN. The output spectrum shows 12dB ACPR improvement both at +11MHz, +20MHz offset from center frequency after linearization.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.313-316
• /
• 2004

This paper presents a new dynamically adaptable polling scheme for efficient support of real-time traffic over an IEEE 802.11 wireless LAN network. The poll scheduling plays an important role in IEEE 802.11 PCF. However, the current version of the polling list management scheme proposed in the IEEE802.11 standard is inefficient when a variable number of mobile stations have variable packets to transmit. If Point Coordinator(PC) has an exact information on the station status, it is possible to efficiently perform polling. In this thesis. we suggest an adaptable polling scheme to meet requirements of the stations. In our scheme, each station transmits packets including a piggyback information to inform that it wants to receive a poll in the next polling duration. Simulation results indicate that our scheme may reduces the packet discard ratio and real-time packet transfer delay.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.249-257
• /
• 2005

A Markov model for the IEEE 802.11 standard which is the most widely deployed wireless LAN protocol, is designed and the channel throughput is evaluated. The DCF of 802.11, which is based on CSMA/CA protocol, coordinates transmissions onto the shared communication channel. In this paper, under a finite load traffic condition and the assumption of packet loss after the final backoff stage. We present an algorithm to find the transmission probability and derive the formula for the channel throughput. The proposed model is validated through simulation and is compared with the case without packet losses.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.113-118
• /
• 2012

In this paper, we discuss the design of the Digital Down Converters for the IEEE 802.11 wireless LAN receiver, which can be used for the customized receiver. The customized receiver can be used for special puropsed services which cannot be realized using the general custom chip. In the OFDM receiver, DDC receives the up sampled Inphase/Quadrature signal from the AD converter and process down sampling and filtering procedures using the Cascaded Intergrator Filter and FIR filters. We discuss the structure and design methodology of DDC's and analyze the simulation results.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.71-77
• /
• 2023

In this paper, a dual-band stopband frequency selective surface that can be applied to Wi-Fi 6E systems is designed to block external interfering signals with adjacent operating frequency spectrum in indoor wireless LAN environments. The proposed frequency selective surface structure has frequency blocking characteristics in the 2.4GHz and 6GHz bands, and is realized through a modified crossed dipole structure and an interlocking puzzle form between unit structures. The proposed structure is designed to have stable frequency response characteristics with respect to incident angle and polarization, and the experimental results show good agreement with the simulation results for incident waves from 0° to 45°.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.820-827
• /
• 2010

In these days, video applications for special purposes such as video conference systems among multiple users and video surveillance systems require multiple video connections and QoS guarantee. The video systems employ IEEE 802.11 Wireless LAN devices to support broadband wireless interfaces and easy internet accesses for cheaper prices. However, according to the current IEEE 802.11e HCCA standard, if more than three video sessions are established in WSTA services, some of them must share the TXOP because the available number of TSIDs for video transmission is two. In order to resolve the problem, we devised a method which can establish up to 15 video sessions by slightly modifying the frame structure while maintaining the compatibility with current standard. Our method is implemented on the NCTUns 4.0 network simulator, and evaluated not only numerically in terms of throughput, delay, and PSNR, but also experimentally in the sense of real video clips that are used as input to our simulation. The results showed that our method sufficiently guarantees the transmission bandwidth requested by each video session.