• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.62-66
• /
• 2006

The objective of this thesis is to measure the limit of the real space where wireless Local Area Network (LAN) is used, and to apply this result as reference to set up a real Wireless LAN environment. The organized circumference was composed of Wireless LAN based on IEEE 802.11b of the American standard, and the examination is carried out on the campus. On the real condition of office environment and open space, the ratio of available distance to a signal at each distance was measured and this result was studied as data to embody wireless LAN on the campus. The measurement under an indoor environment was executed under circumstance having two walls and open space, however, was executed respectively under three circumstances: Where no obstacle, where one wall exists, and where two or more walls exist.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.4
• /
• pp.441-450
• /
• 2001

This dissertation deal with over-all wireless communication technology. And introduce wireless communication technology analytically that it use for Home-LAN communication technology (HomeRF, Bluetooth, IEEE 802.11, HIPERLAN, etc). Home-LAN communications issue by the terminal field of the latest high-speed network construction. This technologies possesses characteristics and significances as the representative technology using in Home-LAN communication technology. Also, the method of application is conditional on individually. Wireless LAN put Home-LAN communications to practical use. Bluetooth have practical use for an individual mobile communications with internet. HomeRF have a vision that the construction of wireless system in house purely. Therefore, this dissertation investigates merits and demerits between those technologies. And then leads the most compatible technology for application of Home-LAN. Finally, this thesis have a view of the development course hereafter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1406-1414
• /
• 2003

This study presents structures and transporting methods of Wireless LAM. And an efficiency analysis for throughput of W level in various environments such as classrooms, assembly halls and offices is performed at this point of time that studies of 5㎓ Wireless LAN are formed actively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.35-40
• /
• 2023

In this paper, a serial wireless LAN virtual communication module that allows microprocessors to communicate wirelessly with other peripheral devices is developed as part of a study to build an online virtual experiment system that allows them to practice virtually anytime, anywhere in microprocessor application education in electrical and electronic control engineering. The developed module is connected to the microprocessor in the virtual experiment system through serial interface. The serial data is sent to and received from peripheral devices through the wireless LAN interface of the host computer where the virtual experiment software is being performed. In order to verify the function of the developed serial wireless LAN virtual communication module, experiments were conducted in which a microprocessor in the virtual experiment system exchanged data with an Android smartphone through a wireless LAN interface of a host computer. The developed serial wireless LAN communication module is expected to enable virtual microprocessors to communicate with surrounding real devices through wireless LAN, which can be efficiently used in microprocessor application education.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.9-12
• /
• 2005

In this research, we developed a ubiquitous computing platform that can analyze the vibration and noise in wireless environment by wireless LAN and sensors. In order to utilize the COTS(Commercial Off The Shelf) concept, we used a PDA that supports wireless LAN and serial communication as a main board. Following platform is used to measure the noise level of heavy construction equipments in a remote area.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.261-265
• /
• 2005

In this paper, we constructed the infrastructure with wireless LAN and Access Point in the indoor environment and implemented the teleoperation. Wireless LAN based teleoperation system is irregular communication delay according to environment condition and occurrence possibility of blackout is very high. In this paper, In case these problem happened, we measured communication delay time by real time, and did mobile robot to control harmoniously through vision and force reflection information. Also, we present obstacle-avoidance mode that mobile robot can travel without collision using direction information in case communication delay time is large. We proved usefulness of presented algorithm through teleoperation experiment to apply presented algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.34-40
• /
• 2003

Because that the wireless LAN and the Bluetooth which are currently used are operating at the ISM 2.4GHz, we must meet the frequency interference So performance degradation is occurred by frequency interference between the wireless LAN and the Bluetooth In this paper, for decreasing the errors between the communication systems because of the interferences, we analysis the influence of mutual interference between the local communication systems and the specification of frequency interference problem on the Bluetooth, the wireless LAN and home electronic products

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1259-1265
• /
• 2013

In wireless environment such as wireless LAN, proper location of wireless LAN AP allows us to take an effective coverage to provide good wireless communication service. To simulate wireless environment, FDTD formulation is introduced and Gaussian pulse injection in grid space is considered to be replaced wireless LAN AP. So structural effect corresponding to location of arbitrary obstacle must be considered, and its received gain is estimated. An obstacle in scattering field should be modeled to be conductor and concrete wall and its diffraction effect for some cross wall is evaluated between transmitter and receiver point.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.1
• /
• pp.51-55
• /
• 2008

A digital home is a ubiquitous environment that is expected to be realized in the near future. All information appliances in a house are connected to each other through wired and/or wireless home networks. Authenticated user can access the various services provided by the digital home, and the access is not restricted by equipment, time, or location. The technologies that form the digital home can be grouped into two categories: wired networking technologies and wireless networking technologies. For the purpose of ubiquitous environments, wireless-networks offer suitable and seamless high-quality services. A wireless LAN can be created simply by equipping a single access point. For that reason, the cost of establishing such a network is low and using it is easy. Of course, there is an exciting new wireless technology. It is the Ultra Wide Band (UWB). However, it is not enough to bring wireless convenience, although offering a broad range of high-speed data transfer capabilities, Because of unstable. Thus, of the wireless-networking systems, we focus on the wireless LAN. We quantitatively analyze its capabilities. The dynamic and adaptive wireless LAN provides a foundation for the evolution toward the next generation of wireless and adaptive networks. The difference between wired LAN and wireless LAN in upload and download rates is small. Although the wireless LAN experiences a greater loss rate than the wired LAN, the difference is minimal. We conclude that a wireless LAN is suitable for use in an apartment environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1045-1049
• /
• 2001

Wireless LANs in the 2.4 ㎓ ISM- band create a new Electromagnetic Compatibility (EMC) problem. We investigated the interference characteristics between such wireless LANs in the case of identical systems, systems with different technical parameters for modulation and demodulation, and using a Gaussian noise source as a disturbance source. Experimental results show that higher throughput is obtained when adjacent wireless LANs use different systems, and that interference characteristics can be evaluated experimentally using a Gaussian noise source. Calculated BER characteristics for the interference agree with experimental measurements, indicating that this calculation method can be used for the design of the wireless LAN network to avoid interference. It is possible to construct an efficient wireless LAN network by combining different wireless LAN systems.