• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.465-467
• /
• 2010

This paper proposes MIMO two-way cooperative relay scheme to optimize the end to end capacity in wireless multi-hop mesh network. The basic idea is to perform data transmission via multi-hop relay nodes, in equidistant topology, this method is quite efficient. However, on one hand this topology is very rare in practical situation, on the other hand, in real practical situation where the topology is most likely non equidistant, the end to end capacity significantly degrades due to bottleneck link caused by uneven SNR. Moreover, the end to end capacity degrades at high SNR due to overreach interference from far nodes existing in multi-hop relay networks. In this paper, MIMO two-way cooperative relay in the region of non equidistant nodes is found efficient to improve the end to end capacity. The proposed scheme is validated using numerical simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.991-1000
• /
• 2019

The flying-disc game has started since 1940. It has been spreading rapidly in Korea since 2007, mainly in elementary schools. Additionally, as sports science has been developed, research on flying discs has been continued to build a monitoring system for technological improvement and efficiency. In this paper, we acquire information on the user's flying-disc using 9-axis motion sensor and GPS. Then we propose a method for wireless transmission using Bluetooth 5.0. Specifically, the HW platform was designed and implemented not only to monitor a real-time data but also to compare and analyze rotational speed, flight trajectory, and a count of disc rotation through post-processing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.582-596
• /
• 2019

Considering that the existing Long Term Evolution is not suitable for the fast and frequent handovers of high-speed trains, this paper proposes a relay-assisted handover mechanism to solve the problems of long handover authentication time and vulnerable to security attacks. It can achieve mutual authentication for train-ground wireless communication, and data transmission is consistent with one-time pad at the same time. The security analysis, efficiency analysis and simulation results show that the proposed mechanism not only realizes the forward security and resists many common attacks, but also effectively reduces the computational overhead of train antenna during the secure handover process. When the running speed of a train is lower than 500km/h, the handover delay is generally lower than 50ms and the handover outage probability is less than 1.8%. When the running speed of a train is 350km/h, the throughput is higher than 16.4mbps in the process of handover. Therefore, the secure handover mechanism can improve the handover performance of high-speed trains.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1053-1056
• /
• 2010

현재 센서 네트워크 시스템을 이용한 다양한 지능형 응용들에 대한 연구가 진행되고 있다. 일반적으로 센서 네트워크는 환경정보를 수집하기 위해 많이 활용된다. 최근 더욱 상세한 환경 모니터링이나 고품질 데이터에 대한 요구로 인해 멀티미디어 데이터의 요구가 증가하고 있다. 본 논문에서는 Zigbee 기반 센서 네트워크의 낮은 대역폭의 한계를 극복하고, 실시간 멀티미디어 데이터 전송을 위한 라우팅 기법에 대한 연구를 수행한다. 기존에 제안된 멀티미디어 데이터 전송 기법의 경우 비효율적인 다중경로 설정단계로 인해 경로설정 시간의 지연이 발생하고, Zigbee 의 대역폭 한계로 인해 낮은 데이터 전송속도를 보인다. 본 논문은 기존 기법의 대역폭 문제를 해결하는 블루투스와 Zigbee 하이브리드 라우팅 구조를 제안한다. 또한 경로설정 시간 지연 문제를 해결하는 경쟁기반 비-중첩 다중 경로 설정 기법을 제안한다. 제안하는 기법의 우수성을 비교평가하기 위해 시뮬레이션을 수행하였다. 그 결과 약 78% 지연시간이 감소되었으며, 통신 속도가 약 6.9 배 증가하였다.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.89-98
• /
• 2010

In the heterogeneous system of various wired or wireless network with IP-based backbone, the continuities of agreedon QoS for multimedia services should be guaranteed regardless of network types and terminal mobility through seamless vertical handover. This paper proposes a QoS provisioning mechanism called D-ISHO which guarantees the continuities of agreed-on QoS and seamless for multimedia services by considering both such characteristics as delay, loss rate and jitter per each service and such status as available band-width, call arrival rate and data transmission rate during the vertical handover. Simulation is done for performance analysis with the measure of handover failure rate and packet loss rate.

• Journal of Platform Technology
• /
• v.11 no.1
• /
• pp.3-10
• /
• 2023

Unmanned Aerial Vehicles (UAVs) have gained significant attention in 5G and 6G wireless networks due to their high flexibility and low hardware costs. However, UAV communication is still challenged by blockage and energy consumption issues. Reconfigurable Intelligent Surfaces (RISs) have emerged as a promising solution to these challenges, enabling improved spectral efficiency and reduced energy consumption by transmitting signals to users who cannot receive signals because of the obstacles. Many previous studies have focused on minimizing power consumption and data transmission delay through phase shift and power optimization. This paper proposes an algorithm that maximizes the sum rate by including bandwidth optimization. Simulation results demonstrate the effectiveness of the proposed algorithm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.720-723
• /
• 2009

기존에 제안된 클러스터 기반의 데이터 전송 프로토콜은 데이터 전송을 위해 헤더 노드가 존재하고 각 헤더노드는 데이터 전송을 위한 경로 정보를 유지해야 하기 때문에 전송할 데이터가 많아지면 저장해야 할 캐시도 증가하게 되고 데이터 전송 시 데이터 공고와 요구의 과정을 거쳐야 된다. 또한 LOAD(6LoWPAN Ad hoc Routing Protocol)에서는 데이터 전송 시 목적지에 대한 경로 정보를 획득 하는 작업과 획득한 경로를 테이블에 보관해야 하는 단점이 있다. 본 논문에서 제안된 데이터 전송 프로토콜은 데이터 전송 요구 시 목적지로 전송하기 위한 경로 정보의 획득이나 유지를 하지 않는다. 또한 노드들이 한번씩 데이터를 전송함으로써 노드의 전체적인 에너지 공평성과 효율성을 증가시키고, 전체 네트워크의 수명을 연장 시킬 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.681-684
• /
• 2011

최근 IEEE 802.11 WLAN(Wireless Local Area Network)에서 실시간 멀티미디어 서비스가 증가하고 있다. WLAN 의 패킷 전송방식은 Unicast 또는 Broadcast 방식이 있다. Unicast 방식은 재전송을 포함하여 유실율이 적으나 사용자가 증가할수록 AP 에서 필요한 무선 자원의 크기가 증가한다. 무선 자원의 크기가 증가하면 AP 부하가 증가하여 서비스 수용에 한계가 있다. Broadcast 방식은 사용자 수에 상관 없이 무선 자원의 크기가 일정하나, 패킷 유실율이 높다. 본 논문에서는 이러한 문제점을 해결하기 위해 Broadcast 와 FEC(Forward Error Correction) Erasure Code 기반 기술을 적용하는 것을 제안한다. 방송 패킷을 이용 AP 의 부하를 줄이고, Reed Solomon Erasure Code 를 적용하여 패킷 유실 복구율을 높인다. 이러한 방법을 통하여 다수의 사용자에게 안정적인 실시간 멀티미디어 방송 서비스를 제공 할 수 있다. 제안한 방법을 검증하기 위해 Android Platform 에서 FEC 적용 유무에 따른 수신율을 측정하였다. 그 결과 유실율 30%미만인 Broadcast 환경에서 96.4% 이상의 수신율을 보였다.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.635-648
• /
• 2018

This study analyzed patent trends of seismic nodal systems and the technical characteristics of core patents of three major companies, including Fairfield, Sercel, and Wireless Seismic, to examine the focus of technology development of each company. From the analysis, the patent application growth rate of seismic nodal systems has steadily increased since early to mid-2000s and has recently shown a higher growth rate. Over the same period, the patent application growth rate of the three major companies examined was higher than that of the global trend, and patent infringement cases was also examined to evaluate market competition in this field. Analysis of the technical characteristics of the three companies' 33 core patents showed that they are generally focused on seismic signal detection. Sub-technologies included improved reliability of data acquisition, data transmission efficiency, and overall operating of the seismic nodal system. New entrants in field of technology development or manufacturing of seismic nodal systems where the market is growing must closely analyze the contents of major companies' products and patents to prevent possible patent disputes or duplicate research.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.35-43
• /
• 2017

In this paper, we propose indoor IoT monitoring system based on visible light communication using smart phone with attracting attentions in recent wireless communication. The main features and contributions of the proposed system developed in this paper are as follows. First, the actual data generated within indoor can be processed via the server by using only the visible light communication. Second, the collected data by using the visible light communication can be monitered by smart phone. Performance evaluation of the proposed system is performed under illumination of the normal fluorescent lamps. We first check successful transmission between transmitting module and receiving module of the data collection system. The monitoring system is tested according to the change of the degree of condensing and distance of the LED and the decoding success rate of the proposed smart phone application. We expect that the proposed system can be applied for indoor and outdoor IoT areas together.