• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.468-474
• /
• 2010

In this paper, a VCHO(Voltage Controlled Harmonic Oscillator) for K-band application has been designed and implemented. The proposed oscillator has a structure of two hair-pin resonators placed on input and output of active device. Using in/out common frequency tuning structure, the VCHO yields some advantages of the enhanced fundamental frequency suppression characteristic as well as the improved output power of second harmonic. According to implementation and measurement results, it was shown that a VCHO provides an output power of -2.41 dBm, a fundamental frequency suppression of -21.84 dBc, and phase noise of -101.44 dBc/Hz at 100 kHz offset. In addition, as for the bias voltage from 0 V to -10 V for the varactor diode, output frequency range of 10.58 MHz is obtained with a power variation of ${\pm}0.19\;dB$ over its frequency range.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.524-530
• /
• 2002

A control of the body posture and movement is maintained by the vestibular system, vision, and proprioceptors. Afferent signals from those receptors are transmitted to the vestibular nuclear complex, and the efferent signals from the vestibular nuclear complex control the eye movement and skeletal muscle contract. The postural disturbance caused by loss of the vestibular function results in nausea, vomiting, vertigo and loss of craving for life. The purpose of this study is to develop a off-vertical rotatory system for evaluating the function of semicircular canals and otolith organs, selectively, and visual stimulation system for- stimulation with horizontal, vortical and 3D patterns. The Off-vortical axis rotator is composed of a comportable chair, a DC servo-motor with reducer and a tilting table controlled by PMSM. And a double feedback loop system containing a velocity feedback loop and a position feedback loop is applied to the servo controlled rotatory chair system. Horizontal, vertical, and 3D patterns of the visual stimulation for applying head mounted display are developed. And wireless portable systems for optokinetic stimulation and recording system of the eye movement is also constructed. The gain, phase, and symmetry is obtained from analysis of the eye movement induced by vestibular and visual stimulation. Detailed data were described.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.235-243
• /
• 2014

In this paper, we propose an efficient control system for intelligent LED indoor lighting. The proposed an efficient control system for intelligent LED indoor lighting were included to elements such as daylight intensity measured through the PIR sensor and illuminance sensor at lighting style by the schedule defined and the occupancy detection. And it was controlled lighting through to the wireless sensor network, and was designed for the energy savings. Also, the lighting control of indoor lighting based on occupancy detection detect fine movements using a PIR sensor. And an unnecessary lighting intensity control of the window-side and the inside were controlled according to daylight level measurement result using the light sensor. In daylight inflow many case, the window-side lighting was to automatically darker, and in daylight inflow less case, was designed to be automatically bright. The efficiency validate results of an efficient control system for intelligent LED indoor lighting, the brightness of the indoor light were to maximize the energy saving by controlling in real time when entering as indoor a little that external lighting or daylight.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.191-196
• /
• 2012

The tactical training system that was applied to wire at open terrain and field is no training accomplishment in conformity with battlefield situation portrayal. Therefore, this paper developed the tactical training and evaluation system for growing fruitfully that is installed as a tactical training monitoring system by USN WMN through controlled sensing interlock for collecting sensing data and guaranteed training equipment status and report training result for serviceability of manager. additionally we implemented controller for managing server of sending and manipulating of being gathered training data by sensor using USN and system as GUI methods. This system is easy for adapting new and improved protocol in order to processing many function of H/W and algorithms which is generated by controlled system is applicable easily.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.25-28
• /
• 1999

Consider connection-oriented wireless cellular net-works. To establish a circuit or virtual circuit in such a network, a paging message is broadcast over a region at which the destined mobile station is presumed to reside, (identified as a paging area). For an effective paging mechanism, it is desirable to provide the location information of mobile stations to the network. In this paper, we consider a mobile controlled location update scheme under which each mobile station periodically reports its current location information to the network by using an inherent timer (without measuring the power of signals transmitted from base stations). Based on the latest information about a mobile station's location, a paging area is selected to page the mobile station. Note that under this scheme, a mobile station may not yet have reported its location change while sojourning out of the current paging area. In such situation, the mobile station can not receive a paging message destined to it. Frequent location updates can reduce the paging failure rate incurred by mobile stations'sojourning out of the paging area. However, larger bandwidth is needed for location update as the location update rate is increased. On the other hand, as the size of the paging area is increased, the paging failure rate is decreased, while larger bandwidth is required for paging. Thus, we first present a model for mobility, paging and location update processes, and secondly investigate the effect of network parameters on the paging failure rate and the amount of bandwidth used for paging and location update. Finally, we formulate problems to find proper values for the location update rate and paging area size under the constraints on the bandwidth usage levels for location update and paging.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.99-109
• /
• 2007

IEEE 802.lie is being proposed to improve QoS by IEEE 802.11 working group. HCCA (HCF Controlled Channel Access) a centralized polling based mechanism of IEEE 802.11e, needs a scheduling algorithm that decides on how the available radio resources are allocated to the polled STAs. In IEEE 802.l1e standard Reference Scheduler is presented. Reference Scheduler Polls all STAs in a polling list by the same interval that causes ineffectively frequent polling. It increases not only the overhead but it decreases the TXOP (Transmission Opportunity) utilization. In this paper, we propose the scheduling and admission control algorithm that poll stations depending on the MSI (Maximum Service Interval)o( stations to solve these shortcomings. In our proposed algorithm a station is polled by an interval close to its MSI, so polling overhead decrease and TXOP utilization increases than Reference Scheduler. Simulation results show that our algorithm outperforms Reference Scheduler. Our algorithm maintains higher aggregate throughput and services mere stations than Reference Scheduler.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.661-664
• /
• 2002

A control of the body posture and movement is maintained by the vestibular system, vision, and proprioceptors. Afferent signals from those receptors are transmitted to the vestibular nuclear complex, and the efferent signals from the vestibular nuclear complex control the eye movement. The postural disturbance caused by loss of the vestibular function results in nausea, vomiting, vertigo and loss of craving for life. The purpose of this study is to develop a off-vertical rotatory system for evaluating the function of semicircular canals and otolith organs, selectively, and visual stimulation system for stimulation with horizontal, vertical and 3D patterns. The Off-vertical axis rotator which stimulates semicircular canals and otolith organs selectively is composed of a comportable chair, a DC servo-motor with reducer and a tilting table controlled by PMSM. And a double feedback loop system containing a velocity feedback loop and a position feedback loop is applied to the servo controlled rotatory chair system. Horizontal, vertical, and 3D patterns of the visual stimulation for applying head mounted display are developed. And wireless portable systems for optokinetic stimulation and recording system of the eye movement is also constructed. The Gain, phase, and symmetry is obtained from analysis of the eye movement induced by vestibular and visual stimulation. Detailed data were described.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.115-123
• /
• 2002

In this paper, we present two types of vision algorithm that mobile robot has CCD camera. for obstacle avoidance and path plan. One is simple algorithm that compare with grey level from input images. Also, The mobile robot depend on image processing and move command from PC host. we has been studied self controlled mobile robot system with CCD camera. This system consists of TMS320F240 digital signal processor, step motor, RF module and CCD camera. we used wireless RF module for movable command transmitting between robot and host PC. This robot go straight until 95 percent filled screen from input image. And the robot recognizes obstacle about 95 percent filled something, so it could avoid the obstacle and conclude new path plan. Another is complex algorithm that image preprocessing by edge detection, converting, thresholding and image processing by labeling, segmentation, pixel density calculation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.4
• /
• pp.241-248
• /
• 2023

Despite the recent short history of drones, the applying field of drones has been used for various purposes in a wide variety of areas and fields. As such, with the emergence of various types of drones over the years, in a broad sense, a remote controlled mobile object that can be controlled by wired and wireless control may be a suitable definition for drone because of various types of drones in recent years. This paper aims to help readers who want to research, develop, and use drones by examining the history, application fields, and future prospects of drones, including Unmanned Surface Vehicle(USV) and Unmanned Underwater Vehicles(UUV), as well as aerial type drones. Through this paper, it is expected that these drones will continue to be used in various fields in the future, and the prospect of future development will continue constantly. However, for the development of domestic drone technology and industry, the government's improvement in drone-related regulations should be supported.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.72-77
• /
• 2017

Lighting systems in modern society has been developed using a combination of IT technology and LED lighting for the purpose of bringing about changes in human-centered natural lighting and to take advantage of the efficient management and energy saving of LED lighting. In this paper, we propose an LED lighting control system that can control the color temperature and brightness of LED lighting composed of 3000K Warm LEDs and 6000K Cool LEDs by using an Arduino Due and wireless communication technology such as Bluetooth and Zigbee. The Arduino Due allows the color temperature of the lighting to be adjusted in several steps by controlling the duty rate and enables many lights to be controlled using Zigbee communication capable of 1: N multiple communication. By using Bluetooth communication, it is possible to easily control the LED lighting by means of a smartphone application, thereby enhancing the convenience for the user. The wireless communication based LED lighting control system implemented in this study cannot only provide human-centered lighting through its color temperature control from 3067K to 5960K and illumination control, but can also reduce the power consumption and be used as a natural-friendly lighting system.