• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.484-489
• /
• 2002

Whenever the accidents occur in the railway areas, their prompt recovery is very important. The individual way has been used to resolve these accidents by direct visiting the site and reporting to others who cares for these cases. As a result, we are planning to operate the MTS (Moving picture Transmission System) for a timely information's transmission to the related peoples in the central control center by transforming the picture information on the accident-site to the digital information. The proposed system is not a transmission system using exclusive lines, but utilizing the existing railway computer network. We construct a network server device so that a dispatcher can easily connect with the server through the railway intranet. In some railway environments such as disturbed field situations and geographical condition(in tunnels and bridges, etc) building up the wired network is difficult. Solving this problem, we reviewed the wireless network. Finally we proposed the mixed wireless network that is able to cover the wired network. We then installed and tested the wired network and wireless network respectively in wayside of a railway field. Through the testing, we identified many detailed matters for some network construction approaches to the control room and many field device-connecting schemes. This research will contribute to minimize the number of staff dispatched to a disturbed field, decrease the accident recovery time and improve the quality of service to the passenger.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1139-1145
• /
• 2010

Wireless mesh network is similar to ad-hoc network, so when transferred to the data packet in the wireless environment, interfered factor arise. When TCP(Transport Control Protocol) was created, however as it was design based on wired link, wireless link made more transmission error than wired link. It is existent problem that TCP unfairness and congestion collapse over wireless mesh network. But packet losses due to transmission errors are more frequent. The cause of transmission error in wireless ad-hoc network may be inexactly regarded as indications of network congestion. And then, Congestion Control Algorithm was running by this situation causes the TCP performance degradation. In this paper, proposed TCP can adaptively regulate the congestion window through moving node in the Wireless Mesh Network. And it enhanced the performance.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.253-259
• /
• 2010

Wireless mesh network is flexible network like Ad hoc network or bluetooth together based on base station. But, wireless mesh network shows high packet loss and when TCP was created, however as it was design based on wired link, wireless link made more transmission error than wired link. It is existent problem of TCP congestion control algorithm that TCP unfairness and congestion collapse over wireless mesh network. When TCP operation occurs with the packet loss where is not the congestion loss, it brings the performance degradation which is serious. In this paper, in order to improve efficient TCP congestion control algorithm in wireless mesh network, we proposed that TCP can adaptively regulate the congestion window in wireless link.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.783-788
• /
• 2011

Most management systems that are currently in place to monitor the safety of bridges - working in conjunction with a wireless sensor network - are based on a wired infrastructure. Not only do these wired systems expensive to install, but they are expensive to replace or repair should a problem occur with the system while in operation. In an effort to address these problems, there have been many researches that attempted to use a wireless sensor network for the existing wired measurement system. However, they have been met with difficulty due to the problems of power and synchronization in actually bringing the management system to the bridges as a commercial system. This paper proposes a bridge management system based on WSN (Wireless Sensor Network) which uses wireless LAN technology. The system was tested using a testbed and when the obtained data were compared to the data collected using the existing wired counterpart it was found that they were almost the same.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.379-387
• /
• 2008

We proposed models that can implement RFID/USN in terms of teaching-learning part, facility management part, teacher and student management part in primary and secondary school in this study. To support these models in school network, we also proposed a new wired network model and a new wireless network model. A new wired network model is derived from existing wired school network that can apply to all sorts of models presented above. And also a new wireless network model is derived from existing wireless LAN that can solve space restriction problem. We calculated communication bandwidth according to school size and network capacity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1448-1453
• /
• 2015

In this paper, we propose an alternative method of communication to improve the reliability of in-vehicle networks by jointly using wireless communication networks. Wired Communication networks have been used in vehicles for the monitoring and the control of vehicle motion, however, the disconnection of wires or hardware fault of networks may cause a critical problem in vehicles. If the network manager detects a disconnection or faults in wired in-vehicle network like the Controller Area Network(CAN), it can redirect the communication path from the wired to the wireless communication like the Zigbee network. To show the validity and the effectiveness of the proposed in-vehicle network architecture, we implement the Electronic Stability Control(ESC) system as ECU-In-the-Loop Simulation(EILS) and verify that the control performance can be kept well even if some hardware faults like disconnection of wires occur.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.666-668
• /
• 2013

Wireless network environment is spreading due to the increase of using mobile devices, causing wireless network abuse. Network security and intrusion detection have been paid attention to wireless as well as wired existing and studied actively Snort-based intrusion detection system (Intrusion Detection System) is a proven open source system which is widely used for the detection of malicious activity in the existing wired network. Snort Wireless has been developed in order to enable the 802.11 wireless detection feature. In this paper, Snort Wireless Rule is analyzed. Based on the results of the analysis, present the traveling direction of future research.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.752-755
• /
• 2009

Recently, the production process system is largely composed automatic system using the wired network. The production process system using wired network has disadvantages that take place expense when the installed and inspected production of equipment was replaced. The each equipment happens to repair cost for control and management in production processes. In this paper, the industrial equipment that applied for IEEE 802.15.4(ZigBee) technology solves a complicated space at the plant. And then when the industrial equipments replace wired network with wireless network, this paper studied its user interface.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.23-30
• /
• 2007

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1063-1068
• /
• 2008

BACnet(Building Automation and Control Networks) is a standard data communication protocol specifically designed for building automation and control systems, BACnet provides six options for data link layer protocols and these six data link layer options can be applied with various wired transmission media. Recently wireless technology prevails in automation area. ZigBee is an IEEE 802.15.4 based standard communication protocol for low-rate wireless personal area networks. In this study, we propose a BACnet over ZigBee model that adopts ZigBee communication channel as a wireless data link layer protocol in a BACnet-based communication network system. The technology proposed in this paper can expand the BACnet application using the advantages of wired and wireless integrated network solution.