• Journal of Korea Spatial Information System Society
• /
• v.6 no.2 s.12
• /
• pp.63-75
• /
• 2004

This paper proposes a Web Service framework on both wired and wireless network environment that can be interoperable and extensible among geo-spatial servers. Mostly, OGC has studied and announced international standards which are related to web services on various kinds of geo-spatial data. Therefore, the proposed framework satisfies interoperability and extensibility for geo-spatial servers by adapting WMS, WFS, WCS, and WRS standards of OGC and web services standards of W3C. This framework, also, satisfies requirements of huge volumed data service, GML service, geo-spatial function service, and wireless network service. This framework consists of geo-spatial servers group, geo-spatial broker, and web-based client. The geo-spatial servers group includes GIS, SIIS, ITS, GNSS, and Telematics server for the purpose of providing various kinds of geo-spatial services. Especially, this paper proposes main memory based GIS server(MMG server) that can efficiently serve huge volumed GML data on wireless network environment. Finally, experimental results about the MMG server and prototype implementations of the framework show the effectiveness of this study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.502-510
• /
• 2011

In this research, a wireless movable systems is introduced that is applicable for real-world clinical examination in order to resolve the inconvenience of wired motion analysis system which uses markers by measuring more accurately the angle of the 3D motion. The system is composed of bluetooth data transmission and 6 DOF inertial measurement system that is composed of 3-axis acceleration and 3-axis gyroscope. The samples were collected from 10 feet of 5 young children who were confirmed as patients having flat feet and achilles tendonitis by podiatric expert in pediatrics, and the validity of the system was evaluated by comparison with the opinion by the expert using the EMG data and the data measured by the developed system. ROM of ankle was measured by the difference between the maximum and the minimum peaks of 3-axis values (pitch, roll and yaw) measured at lateral malleolus bone, and based on this measured value, the eversion rate became relatively higher as flat feet state become worse, which is equivalent to the opinion from the podiatric experts. It was shown that there is a relation between the certain muscle activities and the abnormal motion of foot caused by disease.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.229-238
• /
• 2007

Sensor networks consist of many tiny sensor nodes that collaborate among themselves to collect, process, analyze, and disseminate data. In sensor networks, sensor nodes are typically powered by batteries, and have limited computing resources. Moreover, the redeployment of nodes by energy exhaustion or their movement makes network topology change dynamically. These features incur problems that do not appear in traditional, wired networks. Security in sensor networks is challenging problem due to the nature of wireless communication and the lack of resources. Several efforts are underway to provide security services in sensor networks, but most of them are preventive approaches based on cryptography. However, sensor nodes are extremely vulnerable to capture or key compromise. To ensure the security of the network, it is critical to develop suity mechanisms that can survive malicious attacks from "insiders" who have access to the keying materials or the full control of some nodes. In order to protect against insider attacks, it is necessary to understand how an insider can attack a sensor network. Several attacks have been discussed in the literature. However, insider attacks in general have not been thoroughly studied and verified. In this paper, we study the insider attacks against routing protocols in sensor networks using the Ad-hoc On-Demand Distance Vector (AODV) protocol. We identify the goals of attack, and then study how to achieve these goals by modifying of the routing messages. Finally, with the simulation we study how an attacker affects the sensor networks. After we understand the features of inside attacker, we propose a detect mechanism using hop count information.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.493-502
• /
• 2007

In this paper, we propose a handoff-aware DiffServ scheduler which intends to guarantee various QoS requirements of multimedia services for mobile nodes in TDD/CDMA based wireless networks. TDD is widely used duplexing mechanism in wireless communications. Unlike FDD, TDD allows a node to symmetrically communicate with a base station by using a single frequency band, resulting in high utilization of wireless resources. DiffServ is regarded as a relatively simple QoS support mechanism and thus it is easy to be extended. This is because DiffServ is not a per-flow based mechanisms and it does not require any signaling protocol. However, previously proposed DiffServ schedulers for wired networks can not be deployed directly into wireless networks since they do not consider properties of wireless networks. As a solution to the problem, DSS(DiffServ Supporting Scheduler) was proposed. DSS uses uplink channel, which is originally used for a node to require a base station to transmit packets, to support QoS efficiently. However, QoS does not consider handoff so that it can not support QoS for moving nodes from one cell to the other cell. Therefor. the proposed handoff support QoS mechanism is necessary for TCC/CDMA networks. The proposed scheme allows a mobile node to achieve seamless service without QoS degradation even for the handoff duration.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.441-450
• /
• 2010

Recently, a lot of interest is increased in sensor network which gathers various data through many sensor nodes deployed in wired and wireless network environment. However, because of the limitation in memory, computation, and energy of the sensor nodes, security problem is very important issue. In sensor network, not only the security problem, but also computing power should be seriously considered. In this paper, considering these characteristics, we make the sensor network consist of normal sensor nodes and clusterheaders with enough space and computing power, and propose a group key rekeying scheme adopting PCGR(Predistribution and local Collaborationbased Group Rekeying) for secure group communication. In our proposal, we enhance the security by minimizing the risk to safety of the entire network through verifying the new key value from clusterheader by sensor nodes. That is, to update the group keys, clusterheaders confirm sensor nodes through verifying the information from sensor nodes and send the new group keys back to authentic member nodes. The group keys sent back by the clusterheaders are verified again by sensor nodes. Through this mutual authentication, we can check if clusterheaders are compromised or not. Qualnet simulation result shows that our scheme not only guarantees secure group key rekeying but also decreasesstorage and communication overhead.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.643-658
• /
• 2004

Mobile ad hoc networks(MANET) have recently attrarted a lot of attention in the research community as well as in industry. Although the previous research mainly focused on the various problems of MANET in data link and network layers, we consider, in this paper, how to efficiently support applications such as service discovery on top of MANET. Peer-to-Peer(P2P) overlay network can be adopted to service discovery mechanism because P2P and MANET share certain similarities, primarily the fact that both arc instances of self-organizing decentralized systems. Especially, distributed hash table(DHT) systems used for r2r overlay network can be effective in reducing the communication overhead in service discovery. However, since overlay network is independent of physical network topology and existing topology-aware mechanisms are based on the wired network, they are inefficient in MANET. We propose a proximity-based overlay network routing to overcome the inefficiency of routing in overlay network. In the proximity-based overlay network routing, each node collects information of physically close nodes by using one hop broadcast and routes messages to the logically closest node to destination. In a detailed ns-2 simulation study, we show that the proximity-based overlay network routing reduces the number of physical hops comparable to the flooding-based mechanism with low communication overhead. We also find that the proposed scheme works well in the mobile environment.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.233-243
• /
• 2003

With the original Transmission Control Protocol(TCP) design, which is particularly targeted at the wired networks, a packet loss is assumed to be caused by the network congestion. In the wireless environment where the chances to lose packets due to transmission bit errors are not negligible, though, this assumption may result in unnecessary TCP performance degradation. In this paper, we propose three schemes that improve the ability to conceal the packet losses in the wireless network while limiting the degree of violating TCP end-to-end semantics to a temporary incidents. If there happens a packet loss at the wireless link and there is a chance that the loss is noticed by the sending TCP, the proposed schemes send an indirect acknowledgement. Each of the proposed schemes uses different criteria to decide whether there is a chance that the packet loss occurred in the wireless part is noticed by the sender. In order to limit the buffer overhead in the base, the indirect acknowledgements are issued only when the length of buffer is less than a certain threshold. We use simulation to compare the overhead and the performance of the proposed schemes, and to show that the proposed schemes improve the TCP performance compared to Snoop with a limited amount of buffer at the base station.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1039-1047
• /
• 2017

This paper presents a test development of a Fly-By-Wireless flight control system for a fixed-wing unmanned aerial vehicle (UAV). Fly-By-Wireless system (FBWLS) refers to a system that uses a wireless network instead of a wired network to connect sensors and actuators with a flight control computer (FCC), reducing considerable amount of wires. FBWLS enables to design a much lighter aircraft along with decreased maintenance time and cost. In this research we developed a Zigbee-based FWBLS UAV in which sensors (GPS and AHRS) are wirelessly connected via a FCC to aileron and elevator servo motors. In order to see the effect of time delay due to wireless signal on the flight stability of the UAV, several flight tests were conducted. From the tests, it was confirmed that the effect is minor by comparing the flight response of the FBWLS with the corresponding Fly-By-Wire system.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.64-72
• /
• 2009

AMR(Automatic Meter Reading), which means that it reads the meter of electricity, gas, or water, etc at a remote place automatically through wired or wireless communication, has been studied in terms of Power Line Communication method and Local Area Wireless Communication method, etc. In this paper, we designed and implemented JCA(Java Card for AMR) capable of AMR, which is based on java Card technology indispensable to the ubiquitous world. In this paper, JCA follows standard transactional procedures offered by power supply company and manages power usage log and billing data, and is designed in order to satisfy EMV multi-functional specifications. Because JCA is a multi-functional smart card capable of post-issuance applets as an open platform, it is installed into other applications of affiliated concerns as well as credit card and traffic card applications. Not only the proposed JCA is a low cost system, compared to other AMR systems, but is capable of paying rates in advance or later by applying authentication and security function of java Card. In addition the proposed JCA system can create value added services such as affiliated services with corporate alliance.

• Journal of Biomedical Engineering Research
• /
• v.38 no.6
• /
• pp.277-284
• /
• 2017

This paper presents an implantable pH measurement electrode for wireless gastroesophageal reflux measurement. Usually, gastroesophageal reflux is diagnosed by a catheter-type wire connection between the esophagus and the diagnostic device which brings many side effects such as restriction of daily living, pain, and discomfort in the nasal cavity and pharynx of patients. In order to solve these issues, researchers have been studied a wireless measurement method and a micro-sized pH electrode for human body insertion is necessary. Commercial glass packaged pH meter is formed by a sensing and a reference electrodes in a KCl solution. However, if the glass meter is inserted into the human body, there are risks of leakage of the solution, breakage of the glass package, injury of the body elements. Therefore, the solution should be solidified on the micro-sized noble metal wire which has a characteristic of biocompatible. After solidified wire fabrication, the designed meter was tested for feasibility of measurement and the result was well agreed with pH values of commercial pH meter. Potentials in pH 1 to 12 solution was measured to obtain the sensitivity of the sensor with linearity. And we have designed a simulation of gastroesophageal reflux with symptom frequency, interval, and duration time in pH 2 solution. The proposed sensor has capable to get the same potential for 24 measurements in 3 days, and it has sensed same pH values of 2 for one hour with every 10 minutes. Furthermore, the sensor was survived for 48 hours with reasonable potentials in the acid solution.