• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.79-85
• /
• 2006

Multi-filament hydrostatic extrusion was developed as a fine wire manufacturing process and wire forming experiments were conducted. Also, single wire stretch forming process was proposed in the possibility of obtaining long wire with constant cross-section. In the multi filament extrusion since the workpiece, die and forming facility are in the macro forming circumstance, fine wire and fine hole structure with less than a few micrometer can be easily obtained. Although stretch forming does not use a die in order to avoid the friction problem between the workpiece and the die, it is necessary to have high level of technology to maintain cross-sectional shape and measure in longitudinal direction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.9
• /
• pp.733-737
• /
• 2016

In this paper, we propose a mechanism that can compensate for gravity in a robot manipulator. Industry robots generate torque due to carrying heavy weight. For this reason, the robots need high specification motors, which increases the prices of the robots and their production costs. In order to resolve these problems, a mechanism for gravity compensation has been developed using a spring and wire system. But this system has problems related to wire stretching. A winding mechanism is therefore used to supplement this drawback of the wire. The robot used was developed by the 1-DOF system. Analysis was performed for the performance of the mechanism. Experiments were conducted to compare simulation results and experimental results.

• Archives of Plastic Surgery
• /
• v.46 no.2
• /
• pp.167-170
• /
• 2019

Full-thickness scalp burns secondary to hair coloring are rare; however, such defects can be large and complex reconstruction of hair-bearing tissue may be necessary. Many skin-stretching devices that use gradual traction have been applied to take advantage of the viscoelastic properties of the skin. A 21-year-old female patient was seen with a burn defect on her occipital scalp leading to exposed subcutaneous tissue after chemical application of hair coloring in a salon. The dimensions of the wound were $10cm{\times}5cm$, and a skin graft or flap would have been necessary to close the defect. Two long transfixing K-wires (1.4 mm) and paired 3-wire threads (23 gauge), which are readily available in most hospitals, were applied over a period of 12 days for trichophytic closure of the defect. The remaining scalp scars after primary trichophytic closure with this skin-stretching method were refined with hair follicle transplantation. This skin-stretching method is simple to apply and valuable for helping to close problematic areas of skin shortage that would otherwise require more complicated procedures. This case shows a relatively unknown complication of hair coloring and its treatment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1071-1074
• /
• 1995

This paper proposes two directional bending actator using three link, two shape memory alloys(SMA) of coil-type springs and two guide wires. By the heating of two SMA springs sequentially, the bending and stretching of the actuator is possible. Bending angle, force and repeated bending motion of actuator were measured and characterized. The performance of the actuator has been characterized for the possible application for catheter.

• Journal of Industrial Convergence
• /
• v.9 no.1
• /
• pp.1-13
• /
• 2011

The purpose of this study was to analysis and improve working posture using hazard factor analyzing tools. SI(The Strain Index) came up with the conclusion that RWDR1 and RWDR3 was a dangerous job, but not as dangerous as RWDR2. According to REBA. RWDR3 required some improvements; A mat to prevent fatigue(WIRE/PRESS 2), electric bogie(RWDR1), and waist/wrist protector(RWDR3). Additionally a correct sitting posture m WIRE/PRESS1 and stretching on a regular basis in RWDR2 were recommended.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.214-221
• /
• 1987

The purpose of this study is augmentation of heat transfer without additional power in the case of rectangular air jet which impinges vertically on the heating surface. The experimental results are obtained heat transfer augmentation of a two-dimensional impinging jet using the surface roughness of transverse repeated-rib type. The integral average heat transfer coefficient of ribbed plate is about two times larger than that of flat plate. In order to supplement the information about the mechanism of heat transfer augmentation, the flow structure in the stagnation region is visually studied by using the smoke wire technique. The heat transfer augmentation is due to the effect of stretching of large scale vortex in the stagnation region.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.50-50
• /
• 2009

본 연구에서는 차체 부품의 경량소재 대체에 따른 Panel Assembly Rear Seat Back 부품 제작에 최신 저입열 미그용접공정을 적용한 TWB(Tailor Welded Blank) 공정기술을 확보하기 위해 최적 용접조건 도출에 관한 연구를 진행하였다. 용접 후 성형이 이뤄지는 제조공정의 특성 상 성형강도에 중점을 둔 실험을 진행하였으며, 이를 위해 각 와이어에 따른 용접부의 기계/금속학적 특성이 평가되었다. 대상 시편은 6천계열 열처리형 합금이며, 두께는 각각 1.6t, 1.4t로 이를 맞대기 용접 후 그 특성을 평가하였다. 용접은 저입열 GMA용접 공법 중 하나인 CMT 용접법(Cold Metal Transfer)을 사용하였으며, 평가 대상 와이어로는 4043, 4047, 5183 및 5356이 사용되었다. 특성평가는 마크로 및 마이크로 조직, 경도, 인장강도, 기공 및 결함, 성형강도 등에 대해 이뤄졌으며, 희석된 와이어의 조성이 용접부 특성에 미치는 영향에 대해서도 검토되었다. 실험 결과, 5천계열 와이어가 성형강도에 비교적 더 강인한 결과를 나타냈으며 성형강도는 용접조건 및 초기 갭에 대한 영향은 받았으나, 비드형상과 강도간의 연관성은 찾을 수 없었다. 이에 따라 TWB 적용을 위한 와이어로는 5356이 가장 우수한 것으로 판명되었다.

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.465-474
• /
• 2003

The great variety of commercial brands of orthodontic wires available on the market, stimulated by the so called superior wires (nickel titanium with shape memory effect and superelastic nickel titanium), makes the professional choice for a suitable and less expensive material difficult. The in vitro study of the mechanical properties of the orthodontic wires acts as an auxiliary tool for the professional. In this paper, a comparative study of mechanical properties was made, using stress strain tests for 4 types of orthodontic wires (conventional stainless steel, multistranded steel, superelastic nickel titanium and thermoactivated nickel titanium) separated into 5 groups. A series of 6 tests were tested for each group of wires. Initially, each group was tested 3 times until the wires broke. Furthermore, 3 more tests for each group were performed, stretching the wires under standardized activation loads, for a reliable comparison of their mechanical properties, during loading and unloading. 1 tests were applied to check differences among the groups. In vitro, the results suggest that regarding the mechanical properties supposedly desirable for physiological teeth movement, such as resilience, elasticity modulus, strength liberated during unloading, and the way that strength is liberated, thermoactivated nickel titanium wires, acting under mouth temperature, seems to be a good choice, fellowed by superelastic nickel titanium, multistranded stainless steel, and conventional stainless sleet. Superelasticity was demonstrated for superelastic nickel titanium wires. When at $37^{\circ}C$, thermoactivated nickel titanium wires showed shape memory effect, showing that temperature is important for enhancing the mechanical properties.

• Journal of Forest and Environmental Science
• /
• v.18 no.1
• /
• pp.15-30
• /
• 2001

The twenty-first century was entered and began to show the extent where revegetation of the face of slopes using the native woody plant was nationwide at last. Then, future revegetation of the face of slopes was considered on the basis of them in order to attempt the development of this direction, while the recognition for fundamental matter of the revegetation and revegetation of the regional inhabitant was arranged this time. The regional inhabitant sufficiently understood the necessity of the revegetation, and the method using the native woody plant had sufficiently been recognized, and the high evaluation was given in the method. In the other, the major inhabitant questioned it for introducing the exotic species. It was proposed that the utilization of native weeds should be advanced by the pursuit of many facets of the revegetation of the face of the slopes based on these in future in the place where the introduction of the native woody plant is difficult. And, the method for stretching the wire netting for the face of slopes indicated the necessity of the urgent review, because the artificial disaster might be caused. As a conclusion, the goal of the revegetation of the face of slopes confirmed that it was ecologically stable short-terminable face of slopes physically and connects it with the medium and long term for improvement and improvement of global environment, and it indicated the importance of the revegetation of the face of slopes.