• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.558-561
• /
• 2002

A CCD camera with a laser strip was applied to realize the automation of welding Process in GMAW. It takes relatively long time to process image on-line control using the basic Hough transformation, but it has a tendency of robustness over the noise such spatter and arc light. The adaptive Hough transformation was used to extract the laser stripe and to obtain specific weld points In this study, a neural network based on the generalized delta rule algorithm was adapted for the process control of GMA, such as welding speed, arc voltage and wire feeding speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.594-601
• /
• 1997

Propeller fans are commonly equipped in outdoor units of air-conditioners to provide effective cooling in a dried heat exchanger. A new design technique was developed to satisfy requirements of aerodynamic and aeroacoustic performance, which employs the intersection method of two cylinders for mean camber line. Three proto-types of propeller fan including Palm-Shaped, Highly-Swept(PSHS) fan (proto 3)were not only to provide low lift forces for dipole sound, but also to reduce the organized tip vortices interacting with the fan guide causing narrow-banded rotating instabilities. Cross-correlation technique was applied to study flow noise source characteristics for three proto-type fans designed. The cross-correlations between a microphone at far field and a hot-wire sensor at near field show that flows near hub region of proto 3 fan are less organized and the flow structures especially at high flow rate coefficients for proto 3 fan are less correlated with noise generated than other proto-types fans.

• 오토저널
• /
• 제18권5호
• /
• pp.1-9
• /
• 1996

에어백 관련기술은 차체 충돌특성 평가, 승객거동분석, 좌석벨트/조향축/에어백의 조화설계 등을 포함하는 시스템 엔지니어링 기술과 충돌감지센서, 가스발생기, 모듈 등을 포함하는 주요 기능 부품의 설계 및 제조기술로 구분된다. 이 중 시스템 엔지니어링 기술은 국내의 완성차 업계의 노력에 의하여 선진국의 수준에 근접하고 있으나 부품의 설계 및 제조기술은 매우 취약한 상황이다. 80년대 후반부터 각국의 에어백 관련 특허 출원 건수가 급증하고 있으며 새로운 기능의 부품들이 속속 개발되고 있다. 에어백 기술의 발전방향은 소형화, 경량화, 저렴화로 요약된다. 차량의 전방 충돌에 대비한 에어백이 주종을 이루고 있으나 측면 충돌에 대비한 side bag, 뒷자석 승객을 보호하기 위한 rear bag 등이 개발되고 있고 최근에는 버스 등 대형차량이나 모터사이클 등에도 에어백을 부착하기 위한 연구가 추진되고 있다. 에어백은 충돌센서(crash sensor), 가스발생장치(inflator), 공기주머니(bag), 덮개(cover), 배선(wire harness) 등으로 구성된다. 이들 중에서 공기주머니, 덮개, 가스발생장치를 결합한 부분 조립품을 모듈(module)이라고 부르고 있다. 이하에서는 에어백을 구성하는 주요 기능부품들의 종류, 특성과 기술개발 동향을 알아보기로 한다.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.1-5
• /
• 2012

By using LED optical devices and improving the efficiency of optical devices as well as lighting apparatus for humans, LED lighting industry puts the purpose of manufacturing the main products related with information, electric, large-sized LCD BLU, automobile, shipbuilding, agriculture, medical treatment, environment, and telecommunications, etc. Moreover, the main products and the industrial lighting products are manufactured with fusion, as the result, LED lighting industry provides various effects as well as sources of technology based on practical use of LED technology in order to develop the industry from the perspective of the lower price, the higher efficiency, the higher function, the deeper reliance. In the future, not only the development of new LED technology but also the fusion and combination of digital IT technologies using wire-wireless communication, sensor, controller, and artificial intelligence will be expected to create new industrial fields.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.709-716
• /
• 2005

As a way to build more efficient and intelligent container cranes for todays hub ports, communication networks are used to interconnect numerous sensors, actuators, controllers, and operator switches and consoles that are spatially distributed over a crane. Various signals such as sensor values and operator's commands are digitized and broadcast on the network instead of using separate wiring cables. This not only makes the design and manufacturing of a crane more efficient, but also easier implementation of intelligent control algorithms. This paper presents the performance evaluation of CAN(Controller Area Network), TTP(Time Triggered Protocol) and Byteflight that can be used for cranes. Through discrete event simulation, several important quantitative performance factors such as the probability of a transmission failure, average system delay (data latency) and maximum system delay have been evaluated.

• 제어로봇시스템학회논문지
• /
• 제12궈1호
• /
• pp.54-59
• /
• 2006

The smart space is composed of the wire and/or wireless network, multi-sensor-based environment, and many various controllers. For the smart space, this paper presents a new design method of multirate digital decentralized controller using the intelligent digital redesign technique. In specific, the proposed method is based on the delta-operator and the multirate sampling and takes the form of the LMIs. To shows the feasibility of the suggested method, the computer simulations for Heating, ventilating, and ai. conditioning (HVAC) system are provided.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.223-226
• /
• 2001

In this paper, we devised electrical thermal stimulator for meridian point. The system consist of has four channel applicator, power controller and computer. The applicator consist of resistance wire heater and thermal sensor. A stimulation patterns are obtained from a real moxa combustion. The developed system does not make any smog, does not need moxa anymore, only need electricity.

• 수산해양교육연구
• /
• 제28권2호
• /
• pp.376-383
• /
• 2016

In this paper, the blue-green algae monitoring program of applying IoT(Internet of things) technologies is designed and implemented that can check out the status of the river's water quality in real time. The proposed system is to extract the image data from the camera of raspberry pi by an wireless network, and it is analyzed through the HSV color model. We measure the temperature using a DS18B20 1-wire temperature sensor. The extracted information of image data and temperature is then analyzed in C and Python programs for use with Raspberry Pi. The XML data in PHP program is made from the analyzed information and provides Web services. It also allows to refer the XML data using mobile devices.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.789-795
• /
• 2008

Slope stability is affected by various factors. For safety management of slopes, monitoring systems have been widely constructed along railway lines. The representative data from the systems are variations of ground profile such like ground water level and pore water pressure etc. and direct displacement measured by ground clinometer and tension wire sensor. Slopes are mainly effected by rainfall and rainfall causes the decrease of factor of safety(FOS). Because FOS varies linearly by the variation of ground water level and pore pressure, it has a weak point that could not define the time and proper warning sign to secure the safety of the train. In this study, alternative of FOS such as reliability index and probability of failure is applied to slope stability analysis introducing the reliability concept. FOS, reliability index, probability of failure and velocity of probability of failure of the slopes by variation of ground water level are investigated for setting up the specification of safety management of slopes. By executing case study of a slope(ILLO-IMSUNGLI), it is showed to be applied to specification of safety management.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1150-1155
• /
• 2006

In a heating control system, the indoor temperature controller transfers temperature signals inputed from the temperature sensor and the user to the valve controller. The valve controller recieves these signals then the valve controller controls the valve driving motor on two position control and controls the indoor temperature. When setting up a new valve driving motor from a long distance it is necessary to set up a new valve controller. But occasionary, due to construction, it is impossible to wire between the existing valve controller and the new valve controller. In this situation, the new and existing valve controllers can communicate via power line communication. In this paper it is proposed heating control system controls on two position control via power line communication.