• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.157-162
• /
• 2010

Power line communication, using 25[kV] high voltage of railway catenary, is to provide information which is real-time safety information for train operations and train workers in driving. Lots of noise were occupied in the contact wire by electrical and communication equipments. A signal attenuation was caused characteristics of the contact wire and messenger wire. For relaying communications to transmit information using the contact wire, catenary the noise and signal attenuation were investigated. And the final goal of the study was realized to transmit video information by power line communication on electric railway.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3756-3760
• /
• 2010

본 논문은 조가선을 이용한 전기철도의 전력선 통신을 위한 네트워크 설계를 제안한다. 전기철도에서 필수적인 전차선 및 조가선을 이용하여 전력선 통신에 대한 타당성 검토를 선행연구로 수행하였다. 이를 위해 우선 무가압상태에서 조가선에 신호결합기를 취부하여 양방향 데이터 통신을 구현하였다. 데이터 전송속도가 양호하게 나타났으며 이를 토대로 전력선 통신을 위한 주요 구성품을 제시하고 네트워크 설계를 제안하였다. 향후 네트워크 설계에 대한 타당성을 확보하기 위해 지속적인 연구를 수행하고자 한다.

• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.33-38
• /
• 2012

본 연구에서는 나선형 형태의 와이어를 자동차 무선통신(5.925GHz)용 차량 커넥터에 적용 가능성을 제안하였다. 이 나선형 와이어 형태의 커넥터 설계는 나선형 평균 반경, 나선형 피치, 나선형 와이어 자체의 반경, 나선형와이에서 접지 부분까지의 거리를 중요 설계인자로 판단하여 실시하였다. 이 같은 설계 해석 및 결과는 자동차 통신용 커넥터 설계를 위한 가장 적합한 나선형 와이어 치수 결정에 사용될 수 있을 것이다. 나선형 와이어가 삽입된 최적화된 자동차 WAVE용 커넥터는 삽입손실이 5.925GHz 대역에서 -0.76dB 이내로 발생되었다. 이 삽입손실 결과는 기존의 일반 커넥터에 비하여 21% 성능이 향상된 것이다. 따라서, 본 커넥터 해석결과는 자동차 통신을 위한 고주파대역의 최적 커넥터 설계에 유용하게 사용할 수 있을 것이다.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.497-502
• /
• 2012

Power line communication(PLC) is a kind of communication technology, was made use of controling a frequency narrow band, but as the PLC technology developing, in the near future get to the commercial step that is broadband PLC upto 30 MHz. This paper deals with the PLC of electric railway using capacitive signal coupler. An AC arrester for catenary is used as a capacitive signal coupler, has the characteristic of capacitor. As a result of field test, a messenger wire used PLC contain much of conducted noise about overall frequency band and also signal attenuation rate increased with increasing frequency between two points. and the communication speed of PLC used messenger wire is 793kbps at a distance of 40m. Experimental results show the possibility of PLC using a messenger wire and an AC arrester for catenary at electric railway.

• 한국전자통신학회논문지
• /
• 제18권3호
• /
• pp.509-520
• /
• 2023

항공기에서 소형 제트기까지 항공기에 적용되는 플라이 바이 와이어 시스템의 구성 및 특성등에 대하여 기술 하였다. 특히 비행조종컴퓨터 다중화 방안과 데이터 통신 버스, 조종면 작동기, 플라이 바이 와이어 시스템을 통하여 적용되는 제어 법칙 등에 대한 기술 개발 동향에 대해 고찰하였다. 전투기에 처음 적용되었던 플라이 바이 와이어 시스템은 여러 가지 장점으로 인해 까다로운 인증과정을 거쳐 민간 항공기에까지 적용되었고, 최근에는 소형제트기까지 적용 범위가 확장되고 있으며 미래에는 대부분 플라이 바이 와이어 항공기가 주를 이룰 것으로 전망된다.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.306-312
• /
• 2014

The ZigBee communication method, which is the most frequently applied to the LED lighting control system, has drawbacks of low-speed and low-capacity, and the communication failure possibility due to environmental influences is on the rise. Therefore, it is important to secure the communication reliability by applying an integrated interface with a wire-wireless dual-network. This paper developed a communication module, which has a platform converging and combining the ZigBee of USN environments with the PLC of power line communication environments, to implement a dualized communication interface system supporting the wire-wireless integrated protocol, and implemented a wire-wireless networking device and a control system software technology. As a result, it was automatically switched into the PLC communication within 4.4 seconds on average when there was an access failure in the ZigBee communication network, so a reliable communication network was built.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.18-23
• /
• 2012

We propose and implement a single-wire communication protocol for thermal management systems using thin film thermoelectric modules for 3D IC cooling. The proposed single-wire communication protocol connects the temperature sensors, located near hot spots, to measure the local temperature of the chip. A unique ID number identifying the location of each hot spot is assigned to each temperature sensor. The prototype chip was fabricated by a $0.13{\mu}m$ CMOS MPW process, and the operation of the chip is verified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.717-720
• /
• 2000

Event-driven communication protocols such as CAN(Controller Area Network) have inherent packet delays due to the contention process for the use of network medium. These delays are stochastic in nature because most packets arrive at random time instants. The stochastic property of the delay adversely influences the control system's performance in terms of stability, responsiveness and steady-state error. Another problem for safety-critical application such as brake-by-wire systems is the reliability of the communication modules that can fail abruptly. This paper deals with two methods to overcome the above problems : (i) scheduling method that can maintain packet delays under some acceptable level, and (ii) redundancy management of communication modules that prescribes dual-redundancy modules' behavior when one of them fails.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.530-532
• /
• 1997

In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and a wire secure communications are investigated. A secure communication method in which the desired information signal is synthesized with the chaos signal created by the Chua's circuit is proposed and information signal is demodulated also using the Chua's circuit. The proposed method is synthesizing the desired information with the chaos circuit by adding the information signal to the chaos signal in the wire transmission system. After transmitting the synthesized signal through the wire transmission system, it is confirmed the feasibility of the secure communication from result of demodulated signals and recovered wire tapped signals.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.160-165
• /
• 1996

This paper introduces a sea environmental monitoring system for measuring pH,DO, level and temperature. This system is developed using a personal computer(PC) and multiple single board computers. A PC communicates with the single board computers by awireless communication method and transfers data to another personal computer for processing data by a modem. The values of pH,Do,level and temperature, which are basic components to estimate sea environment, are real-timely processed in the single board computer at each stations, and transferred to the monitoring PC. These data are graphically shown on the PC monitor and logged on the data processing system in the form of file. Using the wire and wireless communication system, user can constantly analyze the acquired data and detect the sea contamination.