• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.612-619
• /
• 2007

In this paper, a Four-wired antenna was designed and manufactured using Four-wires in order to perform EMI/EMC experiments. As compared with a TEM cell, the feature of the Four-wired antenna has simple installment with broadband balun, a Four-wired antenna, and loading resistances in an anechoic chamber. And the E-field polarization of antenna can be easily changed. Without the limitation of space, EMI/EMC experimental environment could be built within the anechoic chamber with the moderate cost. In S, C, and X-bands, the manufactured antenna was able to make an experiment on EMI/EMC with the DUT which has the quiet zone of the height, width, length equal to about 10 cm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.317-323
• /
• 1998

A synchronization is important element not only wire communication but also wireless communication. Especially, In SS(Spread Spectrum) communication method used GPS(Global Positioning System) synchronization is more important. A synchronous oscillator(SO) is a network which synchronizes, tracks, filter, amplifies and divides (if necessary) in a single process. Without an input signal, the SO is a free-running oscillator, oscillating at a frequency $w_0$, but phase changes $180^{\circ}$ within tracking range of SO. Therefore CPSO was used for this problem. The coherent phase synchronous oscillator(CPSO) is created by adding two external loops to the SO and has a wider tracking bandwidth and a zero-offset phase response (coherent) while maintaining the SO properties of high signal-to-rejection and fast frequency acquisition times. Therefore phase between input signal and output signal is synchronized. In this paper, GPS data recovery circuit has applied CPSO using front reference characters and has certified an excellent data recovery capability.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.902-905
• /
• 2008

With development of internet, location-based service (LBS) is getting more interest in wire and wireless network, and many studies are in progress to provide various services such as GIS and GPS technique related to this. Today positioning and information providing service is accomplished by mobile communication companies' chasing the cell or building unique GIS system, but there is a lot of building-cost that must be endured to define boundary of collecting precise location information from chasing Cell and provide unique location information service. In this paper, it desires to make the database of location information with using GPS, relatively precise satellite positioning system, to cut the cost of building location information service, and to present service models such as children's positioning service that is to reduce the cost of building GIS by using Web Open API and provide location information of discrete object in real-time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.552-557
• /
• 2017

Wire, wireless digital broadcasting has sharply expanded with the birth of high definition TV since 2010, the use of duplex contents as well as simplex contents has rapidly increased. Currently, our satellite communications system adopted DVB by European digital broadcasting standardization organization as a standard of domestic data broadcasting, the method how to use selective contents has been studied variously according to the development of IPTV. Digital broadcasting utilizes the method using Transport Stream Packet(TSP) by the way of multiplexing of information in order to send multimedia information such as video, audio and data of MPEG-2, this streams include detail information on TV guide and program as well as video and audio information. In order to understand these data broadcasting system, this study realized TS analyzer that divides transport stream (TS) by packet in Linux environment, analyzes and prints by function, it can help the understanding of TS, the enhancement of stream parsing ability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.920-925
• /
• 2010

A home network system is made up of home devices and wire and wireless network can not only be the subject of cyber attack from a variety factors of threatening, but also have security weakness in cases of hacking, vicious code, worm virus, DoS attack, tapping of communication network, and more. As a result, a variety of problems such as abuse of private life, and exposure and stealing of personal information arose. Therefore, the necessity for a security protocol to protect user asset and personal information within a home network is gradually increasing. Thus, this dissertation designs and suggests a home network security protocol using user authentication and approach-control technology to prevent the threat by unauthorized users towards personal information and user asset in advance by providing the gradual authority to corresponding devices based on authorized information, after authorizing the users with a Public Key Certificate.

• Proceedings of the Technology Innovation Conference
• /
• 2005.02a
• /
• pp.124-139
• /
• 2005

In the early stage, the radio communication industry was widely accepted as a monopoly industry, so it has been controled and managed by government. But the advanced technology in Information and Technology industry has led constant increase of demand and dramatic change of communication market. Furthermore it is expected that frequency resource is to be short by market change due to wire-wireless integration. That is why the effort to utilize and manage limited frequency resource efficiently is being executed around the world. Not only newly developing and allocating the spectrum but also reallocating the existing spectrum important are, since transforming inefficiently used existing spectrum to new service can increase producer's surplus and social welfare. The economic approach to valuate the spectrum and spectrum usage right is necessary different from the traditional cost based approach, and through this approach I expect active transaction of spectrum. In this paper the real option methodology is used for valuation of spectrum, considering spectrum user's option right based on future revenue. In detail, the matter of withdrawing and reallocating the existing analog radio broadcasting spectrum is evaluated in this paper, The digitalization of a broadcasting service is widely spreaded around the world in terms of technology and service utility, and analog TV broadcasting has already been decided to be transformed to digital TV broadcasting. It was planned to convert analog radio broadcasting to DAB service before adopting DMB service, but nowadays this issue is not on the table anymore. However if the increasing demand of digital voice and broadcasting service is considered, this kind of research to valuate a spectrum is needed urgently. The result of this research shows that when the redeployment of spectrum is done, social welfare will increases. The point of the reallocation time and value are suggested by the monte carlo simulation through ROVM. In this paper, I use real option to valuate the spectrum and provide the point of the reallocation time and reasonable guideline, and moreover, the suitable information of this paper is expected to reduce risk and loss in policy practice.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.267-275
• /
• 2003

The development of the mobile communication has been enlarged gradually and has been changed voice centered services into data centered ones supporting Internet to provide various kinds of mobile internet services. Researches for data transmission have been achieved actively lot the effective approachment of web in the mobile terminal. The users using mobile communication are increasing for its easy handcarried and movement and the information in internet based upon wire communication has been changed into mobile communication fast. The development of mobile internet requires various mobile contents using mobile internet at any time and at any place due to rapid enhance of network capacity and mobile internet according to network expansion. To accept these needs, there are many difficult problems that contents must be remade according to various terminal features and the develoument costs much. To solve these problems, this paper has the pun)me that contents of Web documents are changed and processed through XML palter and design new mobile contents system, providing mobile services rapidly and obtaining the charge reduction result with the enhance of contents development to the shortening of a development Period.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.791-799
• /
• 2008

An image recognition for surrounding conditions is very important in image transmission. In recently rears, as the information infrastructure is more general, the user-centered demands in which they want to identify by object's states image using wire or wireless environment have increased. However, existing mobile solution could be hard to expect high quality mage, because limitation of software processing according as network based on mobile terminal which has low band width supports software codec. To solve this weak point, this paper describes on hardware codec design based on MPEG-4 which is international video compression standard. Implemented system contains the embedded CPU for optimized design and it works high quality service as transmission speed and resolution in mobile circumstance.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.5
• /
• pp.329-339
• /
• 2019

Recently, the advancement of information and communication technology(ICT) is expanding the connectivity through Internet of Things(IoT), and the media of connection is also expanding from wire/cable transmission to broadband wireless communication, which has significantly improved mobility. This hyperconnectivity has become a key element of the fourth industrial revolution, whereas the supervisory control network of purification plants in korea is operated as a communication network separated from the outside, thereby lagging in terms of connectivity. This is considered the best way to ensure security, and thus there is hardly any consideration of establishing alternatives to operate an efficient and stable communication network. Moreover, security for management of a commercialized communication network and network management solution may be accompanied by immense costs, making it more difficult to make new attempts. Therefore, to improve the conditions for the current supervisory control network of purification plants, this study developed a industrial security L2 switch that supports modbus TCP(Transmission Control Protocol) communication and encryption function of the transmission section. As a result, the communication security performance improved significantly, and the cost for implementing the network management system using Historical Trend and information of HMI(Human Machine Interface) could be reduced by approximately KRW 200 million. The results of this study may be applied to systems for gas, electricity and social safety nets that are infrastructure communication networks that are similar to purification plants.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.63-67
• /
• 2009

In RFID system, Tag's Identification data is processed in host computer by application program. Example of application program is parking administration program, library state program etc.. Tag's ID that is recognized in reader is inputted to the Host computer. Application program of computer searches data in DB of computer such as Tag ID. After finding the same ID, host computer send to control command to driver H/W in accordance with application purpose. But, It need to confirm in long distance whether achievement process is acted normally. There will be the 2 methods, when we monitors the process in long distance. One is wired monitoring system, another is wireless monitoring system. Among wire method, internet communication network is useful. RFID system manufacture first in this treatise. RFID system Embody using EM4095 chip that is doing 125KHz by carrier wave. Tag's characteristic ID is sent in remote place through module that use W3100A chip. This system Manufacture, and data send-receive confirmed using simple application program. Reception confirm by result, and pictures show by whole system and each part. And a control program explained of each part.