• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.66-75
• /
• 2002

In this paper, a new wireless internet service for TV is proposed using the detection of a mobile agent of each mobile company Especially. new broadcasting programs like as music charts. quiz games can be serried by a mobile internet phone. In this proposed system, all mobile protocols( WAP, ME. W3C) are supported by one server based on the mobile agent detection of URL over the existed wire and wireless internees.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.233-234
• /
• 2004

The study for ubiquitous computing infra is proceeding actively, it make possible to use service and access network anywhere, anytime because of wire/wireless communication technology and progress of hardware. Domestically, study for the network mobility support technology which is the key technology for future ubiquitous computing realization have progressed, but that is Insufficient. Especially, there is no study for independent mobility support study about railway wireless network. So, this study propose network mobility management technology for mobile network infra in railway and proper network model in train.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.3
• /
• pp.138-143
• /
• 2003

With information communications and network environments merged wire/wireless networks are generalized. In this viewpoint, WAP is used by communication protocol for the data communication in the field of wireless environment. WTLS developed for the secure communications optimize TLS adapted wireless environment in the TCP/IP internet protocol. But WTLS denote WAP security problem, end-to-end problem, and power consumption, etc. Therefore in this paper we proposed WTLS cryptographic algorithm eliminated WTLS disadvantages. Proposed algorithm solved power consumption, calculated complexity, and security problems because it is not unique but hybrid form.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.32-37
• /
• 2019

In this paper, we have designed a solar photovoltaic system to attach solar photovoltaic modules to each module and develop the best efficiency in each module. The efficiency of the designed solar panel optimizer was more than 99.27% and MPPT efficiency of 99.66%. In addition, the monitoring of power generation and abnormal operation phenomenon in each optimum period and tracking for failure location of specific photovoltaic module have improved the utilization rate of photovoltaic power generation. Wired and wireless communication methods has been proposed to monitor the power generation and operation status of the solar panel optimizer. For this purpose, the RS485 communication was used for wire communication and Zigbee communication was used for wireless communication to monitor the status of each module in real time. It is shown that communication redundancy can be achieved through the proposed method, and the possibility of commercialization is suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2239-2244
• /
• 2013

Industrial machines have constraints on movement due to its wire for power supply. Recently, the research on wireless power supply for industrial machine which is required to move freely is receiving a lot of attention. In this paper, we suggest a magnetic induction system which can charge a equipment's battery with wireless at a close range. The system was designed to operate at 13.56 MHz and a distance of 20~30 mm between the transmitting and the receiving power module. From experiment, it was found that it takes about 135 minutes for charging the battery with about 15 V using the proposed system.

• Journal of electromagnetic engineering and science
• /
• v.17 no.2
• /
• pp.76-85
• /
• 2017

We investigate the indirect-fed magnetic resonant wireless power transfer (MR-WPT) system for wireless charging for mobile devices by rearranging the loops and coils. Conventional MR-WPT is difficult to apply to consumer electronic products because of the arrangement of the resonators. In addition, there are restrictions for charging using a wireless technology, which depend on the circumstances of the usage scenarios. For practical applications, we analyzed the transfer efficiency of the MR-WPT system with various combinations and positions of resonators. Three rearranged configurations (Out-Out, Out-In, In-In) have been considered and experimentally investigated using hollow pipe loops and wire copper coils. There were four types of loops and two types of coils; each one had a different diameter and thickness. The results of the measurements show that the trends of the transfer efficiencies for the three configurations were similar. A transfer efficiency of 82.5% was achieved at a 35-cm distance between the 60-cm diameter transmitter (Tx) and receiver (Rx) coils.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.569-572
• /
• 2005

A generation to have felt convenience of a network by a development of Internet is pressing for realization of a wireless network. However, security of wireless network must begin with an attack to be good at all expectations. especially considred from L1 layer to L7 layer. Wireless Network weaker than wire because smuggle through various sensor terminal and invasion of radio waves netwwork Wireless network recognizes a security proposal of physical, network application layer, and is going to discuss a security development point of wiress network from now on.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.1
• /
• pp.94-107
• /
• 2024

This study developed compression pants with excellent wearability and signal quality by approaching the design of wireless sEMG monitoring pants from the perspective of technical design, including the evaluation of wearability and the stable wireless transmission of signals through electrode and circuit design, and using e-textiles. An electrode, sewn with silver thread and a circuit stitched in a zigzag pattern using stainless steel wire, were applied. Additionally, polyurethane sealing tape was used to enhance adherence to the skin and reduce electrical resistance. Conductive snaps completed the design, allowing attachment and detachment to the bio-signal acquisition mainboard. Through the subjects' evaluation, it was determined that the final pants were applied with a pattern reduction rate of 25% to provide superior comfort according to different body parts while also minimizing skin irritation around the thigh circuit. The final pants for wireless sEMG monitoring, which demonstrated stable transmission of wireless measurements, was positively evaluated in terms of cognitive acceptability. This study is significant in that it achieved an optimal design by considering both technical aspects and the electrical characteristics of bio-signal monitoring garments, as well as the wearer's perception when designing smart wear.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.87-94
• /
• 2006

For realizing an ubiquitous home network(uHome-net), various sensors should be able to be connected to an integrated wire/wireless sensor network. This paper describes an application case of applying LonWorks technology being widely used in control network to wire/wireless sensor network in uHome-net and the design and application of LonRF device that consists of a neuron chip including LonTalk protocol, a 433.92MHz RF transceiver, a sensor, and application programs. As an application example of the LonRF device, the LonRF smart badge that can measure the 3D location of objects in indoor environment and interwork with the uHome-net was developed. LonRF device based home network services were realized on the uHome-net testbed such as indoor positioning service, remote surveillance service and remote metering service were realized. This research shows that LonWorks technology based sensor network could be applicable to the control network in an ubiquitous home network and the LonRF device can be used as a wireless node in various sensor networks.

• Journal of the Korea Convergence Society
• /
• v.2 no.3
• /
• pp.7-14
• /
• 2011

This paper deals with the efficient management for the intelligent distribution system related with the renewable energy sources, using the wire-wireless monitoring and control device. This device is mainly composed of 2 sections. One is monitoring device with the Autobase S/W and the other is control device using PLC. This paper proposes a wire and wireless monitoring and control device which can monitor and control the 50Kw PV system installed remotely (about 1Km) in the campus of the Korea University of Technology and Education. By the analysis of PV output characteristic using the device proposed in this paper, it is confirmed that the device can contribute the maintenance of PV system and also the establishment of Smart Grid.