• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.567-572
• /
• 2013

In houses that use heating and cooling system, most of heat loss occurs through the windows, so that low-E glass, double-layered glass, and vacuum glazing are used to minimize the heat loss. In this paper, an encapsulating process that is a final process in manufacturing the vacuum glazing has been studied, and bonding in a vacuum chamber rather than atmospheric bonding was considered. For the efficiency of the encapsulating process, frit-melting temperature and bonding time were optimized with heater temperature, and the glass preheating temperature was optimized to prevent glass breakage due to thermal stress. Thus the vacuum glass was successfully manufactured based on these results and heat transmission coefficient measured was about $5.7W/m^2K$ which indicates that the internal pressure of the vacuum glazing is $10^{-2}$ torr.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.1
• /
• pp.45-57
• /
• 2008

The purpose of this study was to examine the job satisfaction of dental hygienists at nine areas including professionalism. autonomy of job performance. backing system. relationship with colleagues. relationship with workers of higher and lower position. relationship with dentists. relationship with supporting departments, relationship with patients and compensation. The subjects in this study were 178 dental hygienists in dental hospitals and clinics. The survey was conducted from December. 2007 to January. 2008. Date were collected by self-administrated questionnaire. A SPSS 10.0 for Windows was used for statistical analysis. So try to for make basic data analysis recognition of enhance job satisfaction of dental hygienist. The findings of the study were as follows : 1. Regarding the relationship of career to job satisfaction. the dental hygienists who worked for one or two years were most satisfied in terms of professionalism. as they got a mean of 3.84. 2. As for connections between academic credential and job satisfaction. those who graduated from junior colleges expressed the best satisfaction at professionalism. since they got a mean of 3.75. 3. As to link between current service area and job satisfaction. the dental hygienists who worked in the region of Gyeong-nam were most gratified with professionalism. as they got a mean of 3.76. 4. Concerning relations between the type of workplace and job satisfaction. the dental hospital employees were most contented with professionalism. as they got a mean of 3.79. 5. In regard to the number of dental hygienists at current workplace and job satisfaction. those whose workplace hired 20 or 30 dental hygienists expressed the best satisfaction with the relationship with dentists. They got a mean of 3.94.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.524-531
• /
• 1992

S/W의 구성은 기능을 실제로 수행하는 계산처리부와 사용자와 정보를 주고받는 User Interface부로 크게 나누어 볼 수 있다. 대부분의 S/W는 그 기능의 충실도와 아울러 편리한 사용법이 잘 어울려야 제역할을 할 수 있다. 따라서 편리한 User Interface를 만드는 일은 훌륭한 기능을 제공하는 것과 마찬가지로 S/W 개발자들이 지향해야 할 목표중 하나라 하겠다. 그러나 편리한 User Interface를 만드는 일은 전체 시스템개발 기간중 상당한 부분을 차지한다. 특히 CAD/CAM관련 S/W와 같이 사용자와 정보를 Graphic으로 주고받는 경우에는 User Interface의 구성이 더욱 더 어려워지며, 개발기간중 User Interace가 차지하는 비중은 더욱 커지게 된다. GUI는 최근들어 상당히 각광을 받고 있는 분야이며, 상당수의 GUI가 개발되어 있고, 이중 Unix용의 X-Window MS-DOS용의 MS-WINDOWS 3.0이 널리 사용되고 있다. 그러나 이러한 Window System들은 매우 다양한 기능을 제공하고 있음에도 불구하고, GUI자체의 덩치가 매우크고, S/W개발자가 익혀야하는 내용이 너무 복잡하여, 중/소형의 S/W개발에 사용하기에는 적합하지 않다. 본 연구에서는 GUI(Graphic User Interface)부분을 계산처리부와 완전분리하여, 범용성있는 개발용 Tool Kit을 구성함으로써 S/W개발자는 계산처리부만을 만들면되는 방안을 제시하고 있다. GS-GUI는 Menu처리부, Mouse/Keyboard입력처리부, Text/Graphic출력처리부로 나뉘어진다. Menu처리부는 Menu File로 주어지는 Menu Tree를 Pop-Up형태로 보여주며 User가 Menu를 선택할 수 있도록하며 선택된 Menu Item에 대한 Action Code를 계산처리부로 넘겨준다. 입력처리부에서는 Mouse와 Keyboard 어느것으로나 입력이 가능하도록 해준다. 출력처리부에서는 Action Code에 따라 계산처리부에서 계산된 결과를 화면에 보여주기 위한 각종 2D/3D Graphic Routine들이 포함되어있어 계산처리부에서 불러쓰도록 되어있다.

• The Korean Journal of Pain
• /
• v.29 no.3
• /
• pp.153-157
• /
• 2016

Tapentadol is a novel oral analgesic with a dual mode of action as an agonist of the ${\mu}$-opioid receptor (MOR), and as a norepinephrine reuptake inhibitor (NRI) all in a single molecule. Immediate release (IR) tapentadol shows its analgesic effect quickly, at around 30 minutes. Its MOR agonistic action produces acute nociceptive pain relief; its role as an NRI brings about chronic neuropathic pain relief. Absorption is rapid, with a mean maximal serum concentration at 1.25-1.5 h after oral intake. It is present primarily in the form of conjugated metabolites after glucuronidation, and excretes rapidly and completely via the kidneys. The most common adverse reactions are nausea, dizziness, vomiting, and somnolence. Constipation is more common in use of the ER formulation. Precautions against concomitant use of central nervous system depressants, including sedatives, hypnotics, tranquilizers, general anesthetics, phenothiazines, other opioids, and alcohol, or use of tapentadol within 14 days of the cessation of monoamine oxidase inhibitors, are advised. The safety and efficacy have not been established for use during pregnancy, labor, and delivery, or for nursing mothers, pediatric patients less than 18 years of age, and cases of severe renal impairment and severe hepatic impairment. The major concerns for tapentadol are abuse, addiction, seeking behavior, withdrawal, and physical dependence. The presumed problem for use of tapentadol is to control the ratio of MOR agonist and NRI. In conclusion, tapentadol produces both nociceptive and neuropathic pain relief, but with worries about abuse and dependence.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.6
• /
• pp.123-134
• /
• 2013

Strengthening vehicle emission regulation is one of important policies to improve air quality in urban area. Due to the limitation of specified driving cycles for certification test to reflect real driving conditions, additional off-cycle emission regulations have been adopted in US and being developed in Europe. The driving cycles of US or Europe have been used in emission certification for Korean light-duty vehicles, but it has not been known how well the driving cycles reflect various real driving patterns in Korea. In that point of view, it is required to estimate vehicle emission based on real road driving conditions to raise the effectiveness of vehicle emission regulation in Korea. In this study, real driving emission measurements have been conducted for three Korean light-duty vehicles with PEMS. The driving routes consisted of urban, rural and motorway in Seoul and Incheon. The data have been analyzed with various averaging methods including moving averaging windows method and compared to emission limits set with emission certification modes applied to tested vehicles. The results have shown that the real driving pollutant emissions of a gasoline and a LPG vehicles have been ranged quite lower than those of emission limits on CVS-75 driving cycle. But real driving NOx of a light duty diesel vehicle has been considerably higher than emission limit of NEDC driving cycle. The higher than expected NOx emission of a diesel vehicle might be caused by different strategy to control EGR in real driving condition from NEDC driving.

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.327-333
• /
• 1998

A new human sensibility (kansei) meter that can measure human sensibility at the indoor environment is developed in this paper. Four sensors that can measure temperature, humidity, $CO_2$ and $C_4H_{10}$ concentrations are used. Among these sensors, the first three are used to determine the human sensibility. And the last to protect human from the harmful gas. First of all, human sensibilities are defined for each sensor datum, and then those are linearly combined to make a final human sensibility (kansei). The efficiency and usefulness of the meter are verified using a simulator on Windows 95 and a stand-alone system constructed using a microprocessor.

• Steel and Composite Structures
• /
• v.28 no.5
• /
• pp.617-628
• /
• 2018

Steel shear wall possesses priority over many of the current lateral load-bearing systems due to reasons like higher elastic stiffness, desirable ductility and energy absorption, convenience in construction and implementation technology, and economic criteria. Besides these advantages, this system causes increase in the dimensions of other structural elements due to its high stiffness as one of its intrinsic characteristics. One of the methods for stiffness reduction is perforating the wall panel and creating openings in the wall that can also be used as windows or ducts in buildings service period. The aim of the present study is probing the appropriate geometric shape and location of opening to fulfil economic criterion plus technical and seismic design criteria. In the present research, a number of possible while reasonable opening shapes and locations are defined in various sizes for some steel shear wall specimens. The specimens are modelled in ABAQUS finite elements software and analyzed using nonlinear pushover analysis. Finally, the analyses' results are reported as force-displacement diagrams and the strength, the initial stiffness and the energy absorption are calculated for all specimens and compared together. The obtained results show that both shape and location of the openings affect the seismic parameters of the shear wall. The specimens in which the openings are further from the center and closer to the columns possess higher stiffness and strength while the specimens in which the openings are closer to the center show more considerable changes in their seismic parameters in response to increase in opening area.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.35-39
• /
• 2002

Introduction : It is essential to input patients external contour in 3D treatment plan. We would like to see changes in depth and dose when 3D RTP is operating auto contouring when windows value (Width/Level) differs in this process. Material & Methode : We have analyzed the results with 3D RTP after CT Scanning with round CT Phantom. We have compared and analyzed MU values according to depth changes to Isocenter changing external contour and inputting random Window value. We have watched change values according to dose optimization in 4 directions(LAO, LPO, RAO, RPO), We plan 100 case for exact analyzation. We have results changing window value random to each beam in 100 cans. Result : It showed change between minimum and maximum value in 4 beam is Depth 0.26mm, MU $1.2\%$ in LAO. It showed LPO-Depth 0.13mm, MU $0.9\%$, RAO-Depth 0.2mm MU $0.8\%$, RPO-Depth 0.27mm, MU $1.1\%$ Conclusion : Maximum change in depth 0.27 mm, MU error rate is $0.12\%$ according to Window change. As we can see in these results, it seems Window value change doesn't effect in treatment. However, it seems there needs to select appropriate Window value in precise treatment.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.783-787
• /
• 2007

Although data analysis in earlier days had been sufficiently done only by character user interface, users of these days are more used to the graphic user interface and the requirements for the user interface are gradually varying and increasing. In order to meet users' various wants and needs and to develop well-equipped interface, not only software developers but also professional designers who can complement the technique of the developers are needed. But in reality there are many restrictions and difficulties for developers and designers to work together cooperatively. Moreover, developing user interface in use of 3D type of graphics and animation techniques causes the rise of the developing cost. The thesis attempts to design and implement 3D visualization for real-time sensor data collected by the various environmental sensor and measuring devices, by using WPF (Window Presentation Foundation) which can make both developers and designers work together cooperatively and which makes it possible to implement various multimedia functions such as a 2D and 3D type of graphics, animation techniques, and an acoustic effect.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1132-1137
• /
• 2011

In this paper, we propose Modified Multi CAMShift Algorithm(Modified Multi Continuously Adaptive Mean Shift Algorithm) that extracts skin color area and tracks several human body parts for real-time human tracking system. Skin color area is extracted by filtering input image in predefined RGB value range. These areas are initial search windows of hands and face for tracking. Gaussian background model prevents search window expending because it restricts skin color area. Also when occluding between these areas, we give more weights in occlusion area and move mass center of target area in color probability distribution image. As result, the proposed algorithm performs better than the original CAMShift approach in multiple object tracking and even when occluding of objects with similar colors.