• International Commerce and Information Review
• /
• v.14 no.4
• /
• pp.109-130
• /
• 2012

In recent years, the volume of global fair trade has been increased rapidly. As the quality of life improves, consumers are increasingly concerned about fairness and environment and show positive attitudes toward ethical products. Fair trade is a social movement that aims to set fair prices for products, alleviate poverty, and assist producers marginalized by the traditional economic model. The study attempt to investigate empirically fair trade products purchase intention, so consumers attitude toward fair trade product purchase, normative belief, fairness restoration expectation, ethical responsibility are defined and their impacts on the purchase intention were analyzed. The statistical method used to test the hypotheses was multi-regression using SPSS 18 for window. The results of this study are follows. Purchase attitudes toward fair trade products and ethical responsibility had a significant effect on the purchase intention. The Effectiveness of the ethical responsibility had greater than that of the purchase attitudes. The result of the empirical study provides important implications for the fair trade related organizations and businesses.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.648-662
• /
• 2004

These days fashion market is overflown with many brands and their identities are not so clear that the advertisement emphasizing the characteristics of the products don＇t seem to be adequate in appealing the customers. Therefore it is required that the sensible image advertisement which appeals to the customers by stimulating their feeling and sensitivity to attract customer＇s interest. At that point, VMD especially of POP advertisement that can be attract direct purchasing plays an important part to build up the accurate image of brand to consumers. Even thought today＇s individualized consumers take much interested in the fresh and original expressions, the visual expressions of fashion advertisements still focus on using photographs. The most advertisement of photograph has a limit that it shows only an immediate fraction, so it can＇t present whole image It can deliver more- imaginations and message than photograph if fashion illustration is used in advertisement. Therefore the purpose of this study was to present the application of fashion illustration for the POP advertisement Twelve pieces of fashion illustrations were produced and classified three parts according to their images and expression techniques. Paper sculpture techniques were applied for fashion image expression, for paper is easily meet daily life and ecological materials. For study procedure and contents, the concept and useful functions of fashion illustration and the concept of paper sculpture were examined as a theoretical background, and various uses and techniques of paper sculpture by analysing a number of paper sculpture art works were also studied. Also the concept, roles and functions of POP advertisement were discussed, and then the examples that the fashion illustration applied in the advertisement were analyzed through case study. The theme of my works was jean fashion brand whose brand image is significant, Twelve pieces of fashion illustrations using paper sculpture techniques were produced and various kinds of paper were used in expressing the paper sculpture technique. Each works were cut out the forms and used a pertinent light for making cubic effect shadow when displayed them. In my works Ⅰand Ⅱ, Ⅰ illustrated jeans in two images of sexy and casual, these were created slightly bigger than actual body size in order to attract consumer＇s gaze at show window or store. In my works Ⅲ, Ⅰ illustrated part or model of a jean product so that it could be used as addition to main display.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7648-7655
• /
• 2015

Nursing service quality can vary depending on the work attitude and behavior of nurses. Nursing attitude and behavior that can be described as voluntary and proactive organizational citizenship behavior(OCB). OCB affects the work performance of nurses in clinical practice is very important and organizational justice is an important influencing factors of OCB. The purpose of this study was to determine the influential factors of organizational justice on OCB of nurses. The descriptive-correlational method was applied. The study was carried out less than a 500-bed hospital. Participants of the study included 230 nurses working in secondary hospitals. Data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient and multiple regression with the 18.0 SPSS/Window program. Considering the components of organizational justice, there was a significant positive correlation(r=.172~.540, p=.000) between OCB and distributive, procedural and interactional justice. Also, Total organizational justice explained 29.1% of total OCB with influencing factor (${\beta}$=.540) and was statistically significant(F=93.777, p=.000). The influencing factors to OCB were distributive justice(${\beta}$=.283) and interactional justice(${\beta}$=.249) except procedural justice. The findings suggest that strategies of nursing management are needed to focus on distributive justice for compensation and interactional justice for social relationship in order to induce nurses' organizational citizenship behavior.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.139-151
• /
• 2007

Stereophotogrammetry is a method to extract information of an interested area by constructing a stereo-image from two or more photos. In this study, the stereophotogrammetry was adopted to obtain the joint orientation and trace length from a sampling window and its measurements were compared with the result by a clinocompass and measuring tape to evaluate the applicability of the stereophotogrammetry to rock joint survey. A commercial stereophotogrammetry program, ShapeMetriX 3D, was used for this purpose. Firstly, the accuracy of the measuring method using ShpaeMetrix 3D was evaluated by a model test. Secondly, joint orientations on a rock slope and tunnel were obtained by using ShapeMetriX 3D and compared with the measurement by a clinocompass. Finally. the effect of base-depth ratio in photographing was evaluated by comparing images with various base-depth ratios, and the usefulness of closed-up photographing on a rock exposure to increase the measurement accuracy was tested. The dip and dip direction of each model plane obtained by ShapeMetriX 3D showed an error ranged between $-5^{\circ}\;and\; 5^{\circ}$ on the basis of the results by the measuring tape. Base-depth ratio proved not to influence the analysis result by ShapeMetriX 3D if all the images were taken without any hidden area. The close-up photographing turned out useful to obtain the detailed images and therefore precise result when ShapeMetriX 3D was adopted.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.178-188
• /
• 2019

When using a distributed system, it is very important to know the intention of a target ship in order to prevent collisions. The action taken by a certain ship for collision avoidance and the action of the target ship it intends to avoid influence each other. However, it is difficult to establish a collision avoidance plan in consideration of multiple-ship situations for this reason. To solve this problem, a Distributed Stochastic Search Algorithm (DSSA) has been proposed. A DSSA searches for a course that can most reduce cost through repeated information exchange with target ships, and then indicates whether the current course should be maintained or a new course should be chosen according to probability and constraints. However, it has not been proven how the parameters used in DSSA affect collision avoidance actions. Therefore, in this paper, I have investigated the effect of the parameters and weight factors of DSSA. Experiments were conducted by combining parameters (time window, safe domain, detection range) and weight factors for encounters of two ships in head-on, crossing, and overtaking situations. A total of 24,000 experiments were conducted: 8,000 iterations for each situation. As a result, no collision occurred in any experiment conducted using DSSA. Costs have been shown to increase if a ship gives a large weight to its destination, i.e., takes selfish behavior. The more lasting the expected position of the target ship, the smaller the sailing distance and the number of message exchanges. The larger the detection range, the safer the interaction.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.367-374
• /
• 2022

The purpose of this study was to propose a deep learning algorithm that applies to the fault diagnosis of fuel pumps and purifiers of autonomous ships. A deep learning algorithm reflecting the time dependence of the measured signal was configured, and the failure pattern was trained using the vibration signal, measured in the equipment's regular operation and failure state. Considering the sequential time-dependence of deterioration implied in the vibration signal, this study adopts Conv1D with sliding window computation for fault detection. The time dependence was also reflected, by transferring the measured signal from two-dimensional to three-dimensional. Additionally, the optimal values of the hyper-parameters of the Conv1D model were determined, using the grid search technique. Finally, the results show that the proposed data preprocessing method as well as the Conv1D model, can reflect the sequential dependency between the fault and its effect on the measured signal, and appropriately perform anomaly as well as failure detection, of the equipment chosen for application.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.79-89
• /
• 2023

A multi-view display is regarded as the most practical technology to provide a three-dimensional effect to a viewer because it can provide an appropriate viewpoint according to the observer's position. But, most multi-view displays with flat shapes have a disadvantage in that a viewer watches 3D images only within a limited front viewing angle. In this paper, we proposed a spherical display using a ball lens with spherical symmetry that provides perfect parallax by extending the viewing zone to 360 degrees. In the proposed system, each projection lens is designed to be packaged into a small modular array, and the module array is arranged in a spherical shape around a ball lens to provide vertical and horizontal parallax. Through the applied optical module, the image is formed in the center of the ball lens, and 3D contents are clearly imaged with the size of about 0.65 times the diameter of the ball lens when the viewer watches them within the viewing window. Therefore, the feasibility of a 360-degree full parallax display that overcomes the spherical aberration of a ball lens and provides a wide field of view is confirmed experimentally.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.6
• /
• pp.187-202
• /
• 2019

The main goal of this study is to investigate influence of trust in physical education (PE) teachers and immersion experience in PE classes on attitude and satisfaction during PE classes. Total 863 middle school students in Gwang-ju metropolitan area were recruited by utilizing a convenience sampling method. All data were analyzed by using SPSS statistic program ver. 25.0 (frequency analysis, exploratory factor analysis, reliability analysis, correlation analysis, multiple regression analysis). Alpha was set at 0.05. The results of this study is summarized as in the following. First, all sub-factors of trust in the PE teachers partially positively or negatively influence sub-factors of attitude during PE classes. Second, sub-factors of satisfaction during PE classes were partially positively affected to trust in the PE teachers. Third, Attitude during PE Classes were found to have partial positive influence on immersion experience in PE classes. Fourth, sub-factors of immersion experience in PE classes have partial positive effect on the sub-factors of satisfaction during PE classes. Thus, in order to the positive attitude and greater satisfaction during PE classes, it is important to establish the trust of PE teachers through maintaining interaction with students, constructing better systemic class, and creating the class conditions based on considering students' ability. In addition, in order to enhance immersion experiences of students during PE classes, it is necessary to set up learning goals and tasks based on ability of students, to study various teaching method, and to make only focusing on the performance based PE classes without grading.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.101-106
• /
• 2009

Purpose of this study is to compare the signal intensity (SI) and CNR with T1 weighted image using FLASH at 3T abdominal MRI by varying flip angle (FA). Totally 20 patients (male : 12, female : 8, Age : $28{\sim}63$ years with mean : 51) were examined by 3 Tesla MR scanner (Magnetom Tim Trio, SIEMENS, Germany) with 8 channel body array coil between september and October 2008. Imaging parameters were as follows : FLASH sequence, TR : 120 ms, TE : minimum, FOV (field of view) : $360{\times}300\;mm$, Matrix : $256{\times}224$, slice : 6 mm, scan time : 15 sec and Breath-hold technique. Abdominal image, with a 50 ml syringe filled with water placed in the FOV measuring the water signal, were acquired with varying FA through $10^{\circ}$ to $90^{\circ}$ with $10^{\circ}$ interval. SI's were measured three times at liver parenchyme, water, spleen and background and averaged. The CNR's were measured between the ROIs (region of interest). Statistic analysis was performed with ANOVA test using SPSS software (version 17.0). Less than FA $30^{\circ}$, abdominal images were severely inhomogeneity. Especially, T1 effect of water signal was weak. As the flip angle increased, the signal intensity decreased at all the regions. Especially, flip angle of the highest signal intensity was observed with $40^{\circ}$ at the liver parenchyme, $20^{\circ}$ at water, $30^{\circ}$ at the spleen, respectively. The CNR between liver and water was -60.92 at FA $10^{\circ}$ and 15.16 at FA $80^{\circ}$. The CNR between liver and spleen was -3.18 at FA $10^{\circ}$ and 9.65 at $80^{\circ}$. In conclusion, FA $80^{\circ}$ is optimal for T1 weighted effect using FLASH pulse sequence at 3.0 T abdominal MRI.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.347-357
• /
• 2003

This paper describes on the suppression of sea clutter on marine radar display using a cell-averaging CFAR(constant false alarm rate) technique, and on the analysis of radar echo signal data in relation to the estimation of ARPA functions and the detection of the shadow effect in clutter returns. The echo signal was measured using a X -band radar, that is located on the Pukyong National University, with a horizontal beamwidth of $$3.9^{\circ}$$, a vertical beamwidth of $20^{\circ}$, pulsewidth of $0.8 {\mu}s$ and a transmitted peak power of 4 ㎾ The suppression performance of sea clutter was investigated for the probability of false alarm between $l0-^0.25;and; 10^-1.0$. Also the performance of cell averaging CFAR was compared with that of ideal fixed threshold. The motion vectors and trajectory of ships was extracted and the shadow effect in clutter returns was analyzed. The results obtained are summarized as follows；1. The ARPA plotting results and motion vectors for acquired targets extracted by analyzing the echo signal data were displayed on the PC based radar system and the continuous trajectory of ships was tracked in real time. 2. To suppress the sea clutter under noisy environment, a cell averaging CFAR processor having total CFAR window of 47 samples(20+20 reference cells, 3+3 guard cells and the cell under test) was designed. On a particular data set acquired at Suyong Man, Busan, Korea, when the probability of false alarm applied to the designed cell averaging CFAR processor was 10$^{-0}$.75/ the suppression performance of radar clutter was significantly improved. The results obtained suggest that the designed cell averaging CFAR processor was very effective in uniform clutter environments. 3. It is concluded that the cell averaging CF AR may be able to give a considerable improvement in suppression performance of uniform sea clutter compared to the ideal fixed threshold. 4. The effective height of target, that was estimated by analyzing the shadow effect in clutter returns for a number of range bins behind the target as seen from the radar antenna, was approximately 1.2 m and the information for this height can be used to extract the shape parameter of tracked target..