• Smart Structures and Systems
• /
• 제15권2호
• /
• pp.283-297
• /
• 2015

Jacket-type offshore structures are always exposed to severe environmental conditions such as salt, high speed of current, wave, and wind compared with other onshore structures. In spite of the importance of maintaining the structural integrity for an offshore structure, there are few cases to apply a structural health monitoring (SHM) system in practice. The impedance-based SHM is a kind of local SHM techniques and to date, numerous techniques and algorithms have been proposed for local SHM of real-scale structures. However, it still requires a significant challenge for practical applications to compensate unknown environmental effects and to extract only damage features from impedance signals. In this study, the impedance-based SHM was carried out on a 1/20-scaled model of an Uldolmok current power plant structure in Korea under changes in temperature and transverse loadings. Principal component analysis (PCA)-based approach was applied with a conventional damage index to eliminate environmental changes by removing principal components sensitive to them. Experimental results showed that the proposed approach is an effective tool for long-term SHM under significant environmental changes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.199-208
• /
• 2001

In this paper, an automatic route tracking algorithm using the position variables and the yaw angle of a ship is suggested, Since most autopilot systems paly only a role of course-keeping by integrating the gyrocompass output, they cannot cope with position errors between the desired route and real route of the ship resulted from a drifting and disturbances such as wave, wind and currents during navigation. In order for autopilot systems to track the desired route, a method which can reduce such position errors is required and some algorithms have been proposed[1,2]While such were turned out effective methods, they have a shortage that the rudder control actions for reducing the position errors are occurred very frequently. In order to improve this problem it is necessary to convert that error into the corresponding yaw angle and necessary to treat only yaw angle control problem. To do this a command generation algorithm which converts the rudder angle command reducing the current position error into they yaw angle command is suggested. To control the ship under disturbances and nonlinearities of the ship dynamics, the adaptive fuzzy controller is developed. Finally, through computer simulations for two ship models, the effectiveness of the suggested method and the possibility of the automatic route tracking are assured.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권1호
• /
• pp.91-97
• /
• 2009

It is undertaken systematization of results of satellite and ground observation parameters characterizing a current condition and climatic variability of two selected geographical areas. One of them covers territory of Azerbaijan and another covers a wide area of Caspian See region. Average values and mean square deviations of following values are investigated: outgoing long wave radiation during a day and night (in nebulosity and cloudless). absorbed within a day of the stream of a sunlight of the system in "a terrestrial surface-atmosphere". degree of a covering by clouds of the selected areas during a day and at night, ground temperature values of air. pressure and speed of a wind. Monthly average values of corresponding parameters create a basis of suggested investigations. It has been presented features of a time course of investigated parameters for each month and year in the whole due to the continuously observations since 1982-2000. The scientific problem consists that there are no existed models which authentically would be cover the main aspects of a realities specified changes: they are identified by economic activities. growth of the population and other features of development of a human society or internal fluctuations of biogeophysical/climatic system. Possibilities of predictability of biosphere and climate changes depend on available timely supervision. adequacy of construction of appropriate models. understanding of mechanisms of direct and feedback influences in such complicated systems.

• 수산해양기술연구
• /
• 제56권1호
• /
• pp.61-70
• /
• 2020

In this study, system modeling and dynamic analysis of crane are conducted. Especially, among many different kinds of a crane system, the issues on crane operating problems installed on the vessel are considered. As well known, marine systems including cranes are exposed to various disturbances such as vessel motions, hydrodynamic forces, wave and wind attack, etc. In order to analysis the system dynamic with environmental conditions, the authors derived the nonlinear dynamic model of offshore crane and derived a linear model which is used for designing the control system. Using the obtained nonlinear and linear models, simulations were conducted to evaluate the usefulness of the obtained models. By simulation and result evaluation, the usefulness of the linear model, which presents the dynamics, is effectively verified.

• 한국항해항만학회지
• /
• 제28권7호
• /
• pp.609-617
• /
• 2004

The total tug capacity needed for berthing/unberthing operations of a ship may vary depending on the ship's type, size, loading conditions, and environmental circumstances. Traditionally, total tug capacity is determined based on the local guidelines of port authorities or on the rule of thumb. However, the social demands for the enhancement of ship safety at harbor and the economical demands for the cost-effectiveness of tug usage makes it necessary for port authorities to develop more reasonable and detailed guidelines on tug usage which takes various conditions into account. In this paper, the method to estimate the optimum tug capacity of VLCC is suggested by considering various ship conditions such as its size, loading conditions, and environmental circumstances including wind, wave, tidal currents, and geographical characteristics of a terminal. This method is applied to the VLCC terminal located in Gwang-Yang harbor of Korea and the results are compared with the local guidelines of the harbor, which shows that there may be a room for the amendment of local guidelines on tug usage.

• 한국응급구조학회지
• /
• 제24권1호
• /
• pp.77-84
• /
• 2020

Purpose: This study was conducted to determine effective chest compression methods that could be used when performing cardiopulmonary resuscitation in rocking boats. Methods: Tests were conducted for four minutes using manual and mechanical chest compressions on two mannequins, placed in boats, and moving at a speed of 35km/hours on calm sea surfaces with wave heights of 0.5m and wind speeds of 2-3m/s (testing for two minutes, followed by rest, then a second round of testing for two minutes). To compare the quality of the chest compressions, data were analyzed using mannequins (Resusci Anne Q-CPR, Laerdal, Norway) and then statistically processed. Results: When chest compressions were administered in the moving rescue boat, an accuracy analysis showed that the pressure speed of the hand and mechanical techniques were normal, h owever, the pressure depth accuracies were 49.04% for manual techniques and 0% for mechanical techniques. The relaxation accuracies during compressions were 2.07% for manual techniques and 95.4% for mechanical techniques. Conclusion: When administering chest compressions in rocking rescue boats, mechanical rather than manual techniques should be preferentially considered.

• 한국농공학회지
• /
• 제33권4호
• /
• pp.73-83
• /
• 1991

A numerical simulation of a 2-dimensional tidal flow in a shallow sea was performed using the frequency domain finite element method. In this study, to overcome the inherent problems of a time domain model which requires high eddy viscosity and small time steps to insure numerical stability, the harmonic function incorporated with the linearized function of governing equations was applied. Calculations were carried out using the developed tidal model(TIDE) in a rectangular channel of lOm(depth) X 4km (width) X 25km(length) under the condition of tidal waves entering the channel closed at one end for both with and without bottom friction damping. The predicted velocities and water levels at different points of the channel were in close agreement with less than 1 % error between the numerical and analytical solutions. The results showed that the characteristics of the tidal flow were greatly affected by the magnitude of tidal elevation forcing, and not by on surface friction, wind, or the linear bottom friction when the value was less than 0.01. For the optimum size of grid to obtain a consistent solution, the ratio between the length of the maximum grid and the tidal wave length should be less than 0.0018. It was concluded that the finite element tidal model(TIDE) developed in this study could handle the numerical simulation of tidal flows for more complex geometrical conditions.

• Journal of Astronomy and Space Sciences
• /
• 제29권1호
• /
• pp.47-49
• /
• 2012

Massive binary stars lose mass by two mechanisms: jet-driven mass loss during periods of active mass transfer and by wind-driven mass loss. Beta Lyrae is an eclipsing, semi-detached binary whose state of active mass transfer provides a unique opportunity to study how the evolution of binary systems is affected by jet-driven mass loss. Roche lobe overflow from the primary star feeds the thick accretion disk which almost completely obscures the mass-gaining star. A hot spot predicted to be on the edge of the accretion disk may be the source of beta Lyrae's bipolar outflows. I present results from spectropolarimetric data taken with the University of Wisconsin's Half-Wave Spectropolarimeter and the Flower and Cook Observatory's photoelastic modulating polarimeter instrument which have implications for our current understanding of the system's disk geometry. Using broadband polarimetric analysis, I derive new information about the structure of the disk and the presence and location of a hot spot. These results place constraints on the geometrical distribution of material in beta Lyrae and can help quantify the amount of mass lost from massive interacting binary systems during phases of mass transfer and jet-driven mass loss.

• Wind and Structures
• /
• 제7권4호
• /
• pp.215-234
• /
• 2004

The tuned liquid damper (TLD) is increasingly being used as an economical and effective vibration absorber. It consists of a water tank having the fundamental sloshing fluid frequency tuned to the natural frequency of the structure. In order to perform efficiently, the TLD must possess a certain amount of inherent damping. This can be achieved by placing screens inside the tank. The current study experimentally investigates the behaviour of a TLD equipped with damping screens. A series of shake table tests are conducted in order to assess the effect of the screens on the free surface motion, the base shear forces and the amount of energy dissipated. The variation of these parameters with the level of excitation is also studied. Finally, an amplitude dependent equivalent tuned mass damper (TMD), representing the TLD, is determined based on the experimental results. The dynamic characteristics of this equivalent TMD, in terms of mass, stiffness and damping parameters are determined by energy equivalence. The above parameters are expressed in terms of the base excitation amplitude. The parameters are compared to those obtained using linear small amplitude wave theory. The validity of this nonlinear model is examined in the companion paper.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.311-316
• /
• 2004

항만을 출입항하는 선박의 통항 안전을 확보하기 위해서는 방파제와 같은 항만 시설물의 설계 또는 배치시에는 우선적으로 선박의 조종 성능을 감안하여 교통 흐름이 원활하도록 적정한 항로를 지정하여야 한다. 이 연구에서는 부산항 및 감천항 입항을 위해 방파제 인접 항로에서 일정 침로로 접근하는 컨테이너 선박이 외력인 바람, 조류, 파랑에 의해 선체에 발생하는 횡압류 및 회두 현상을 정량적으로 분석하여, 선속에 따라 외력을 상쇄하기 위해 취해야 할 대응타각을 산출한다. 또한 향후 방파제 설계 및 배치시 고려해야 될 외력하의 선박의 조종 성능 요소를 제안함과 동시에 방파제의 설계와 항로 배치와의 관계에 대하여 고찰한다.