• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.282-284
• /
• 1997

Ultrasonic motors using piezoelectric ceramics and brass metal endcaps were fabricated, which is operated by single - phase high frequency. The structure of the ultrasonic motors has the wind-mill type. The stator part consists of a piezoelectric disk and two metal endcaps slotted wind-mill type. According to the piezoceramic disk vibrates as a radial mode, two metal endcaps provide both longitudinal and torsional displacements simultaneously. Because the metal endcaps have a nonsymmetric structure. the principle of the ultrasonic motor is not well understood. The dimension of the ultrasonic motor is diameter in 12.7 mm and thickness in 2.0 mm, and especially the PMN-PT-PZ piezoelectric disk was used. The maximum revolution speed 700 rpm and the maximum torque 0.22 mN.m were obtained. The ultrasonic motor for rotation was Supplied only single phase AC.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1780-1782
• /
• 1999

The ultrasonic motor used here is the windmill type ultrasonic motor operated by single-phase AC source. A metal-ceramic composite component was used as the stator element to generate ultrasonic vibrations. The windmill type ultrasonic motors has only three components; a stator element of two wind-mill shape slotted metal endcaps, a rotor and a bearing. In this paper we proposed a system for torque measurement of piezoelectric ultrasonic motor.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.84-89
• /
• 2008

Twin screw mode LNG Carrier is appeared. Because LNG CARRIER is larger recently. In this paper introduces maneuvering characteristics of Twin screw LNG CARRIER on single screw mode, which are found when the non-using screw mode is fixed or not(wind mill).

• Journal of Advanced Engineering and Technology
• /
• v.11 no.4
• /
• pp.245-251
• /
• 2018

Terahertz waves (T-ray) was extensively studied for the NDE (nondestructive evaluation) of characterization of trailing edges for a use of turbines composed with composite materials. The used NDE system were consisted of both CW(Continuous wave) and TDS (Time domain spectroscopy). The FRP composites were utilized for two kinds of both trailing edges of wind energy (non-conducting polymeric composites) and carbon fiber composites with conducting properties. The signals of T-ray in the TDS (Time domain spectroscopy) mode resembles almost that of ultrasound waves; however, a terahertz pulse could not penetrate a material with conductivity unlike ultrasound. Also, a method was suggested to obtain the "n" in the materials, which is called the refractive index (n). The data of refractive index (n) could be solved for the trailing edges. The trailing edges were scanned for characterization and inspection. C-scan and B-scan images were obtained and best optimal NDE techniques were suggested for complicated geometry samples by terahertz radiation. Especially, it is found that the defect image of T-ray corresponded with defect locations for the trailing edges of wind mill.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.3
• /
• pp.13-30
• /
• 1996

It is general that large ships entering or leaving a port located in the East coast of Korean peninsular are often exposed athwart to swell while maneuvering in the vicinity of breakwater at harbor enterance or to prevailing wind inside the port in winter. Particulary, Many VLCCs laden with ore coal are calling at Pohang Port, on account of which it is likely that one of those VLCCs block the port if they were to run aground in fairway due to adverse circumstance of swell, prevailing winds or improper shiphandling. This accident may result in delay of delivery of raw material for Pohang Steel Mill which will bring about shortcomings of steel products for nationwide relevant industries causing national economic shock. Therefore, This study basically aims at establishment of certain criteria for safe unberthing of VLCC in this port to prevent such unexpected disaster because any VLLC is highly affected by external forces when in ballast condition. Computer simulations are unavoidable to fulfull this study successfuly and many simulations have been carried out repeatedly to find a model of safe unberthing under various unfavourable wind conditions. The "PC-based ship maneuvering simulator for training purpose" was used to perform numerous simulations at the least economic burden and to verify its availability that it can be used not only for training but also some other purposes. purposes.

• Journal of Environmental Science International
• /
• v.18 no.10
• /
• pp.1103-1114
• /
• 2009

In this study, the environmental behavior of malodor pollutants (MPs: $H_2S$, $CH_3SH$, DMS, and DMDS) was investigated around areas influenced by strong anthropogenic processes based on observations and modeling study (a CALPUFF dispersion model). The MP emission concentrations were measured from 8 industrial source regions (tire plants (S1-S3), waste water disposal plant (S4), and oil refinery (S5) in an urban center area and paper mill/incineration plant (S6) and livestock feedlots (S7-S8) in Ungsang area) in Yangsan city during a fall period in 2008 (21 October 2008). Overall, the most MPs emitted from the urban center area were found to affect the malodor pollution in their downwind areas during early morning (06:00 LST) and nighttime (18:00 and 21:00 LST), compared with those in the Ungsang area. For malodor intensity, the most MPs in the urban center area (especially S1 and S2) were found to be a significant contributor, whereas $CH_3SH$ and $H_2S$ in the Ungsnag area (especially S6) were the dominant contributor. The model study showed agreement in the spatial distributions of simulated MPs with those of the observations. The largest impact of MPs in the urban center area on the malodor pollution in its residential areas occurred at S1, S2, and S3 sites during nighttime, while that of MPs in the Ungsang area occurred at S6 and S8 sites. This may be caused mainly by the high MP emissions and in part by wind conditions (prevailing northeasterly winds with low wind speeds of 2-3 m/s).

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.75-79
• /
• 2002

In this research, a design guideline of current generating rotor and acceptable field rotor in offshore environment is proposed. To design rotor model, wind mill rotor design principles and turbine theories were applied based on a field rotor experimental data. To verify the compatibility of the rotor design method and to analyze the properties of design factors, 3 rotor models were designed and experimented in a circular water channel. Three rotor models were designed according to different blade numbers and blade shapes. With various flow velocities and rotor rpm, the rotor power and efficiency were measured and the properties of rotor were estimated. The results can be effectively applied to the design of current generation rotor.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.749-751
• /
• 1998

In this study, the wind-mill type ultrasonic motor was fabricated, and then revolution and temperature characteristics of the ultrasonic motor were measured. Brass metal was pressed with umbrella-type using metal mold, then slot of 4 kind was processed in each of thickness. Among sixteen's ultrasonic motors, heat loss on applied voltage was much at stator of the highest resonant point, but heat loss on applied voltage was almost neglected at the lowest resonant point of stator. The thickener thickness of elastic body, revolution speed was decreased. The more slot of elastic body, revolution speed was increased. Applied voltage was changed from $10V_{max}$ to $100V_{max}$. When applied voltage was under $20V_{max}$, ultrasonic motor was not rotated. When applied voltage was over $90V_{max}$, revolution of ultrasonic motor was saturated. Maximum revolution speed was 510[rpm].

• Journal of Ocean Engineering and Technology
• /
• v.16 no.1
• /
• pp.58-63
• /
• 2002

In this research, a design guideline of current generating HAT rotor and acceptable field rotor in offshore environment is proposed. To design HAT rotor model, wind mill rotor design principles and turbine theories were applied based on a field HAT rotor experimental data. To verify the compatibility of the rotor design method and to analyze the properties of design factors, 3 rotor models were designed and experimented in a circular water channel. Three rotor models were designed according to different blade numbers and blade shapes. By changing flow velocity, rotor rpm, the rotor power and efficiency were measured and the properties of rotor were estimated. The results can be effectively applied to the design of current generation rotor.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.32-39
• /
• 1997

The coiling station of ISP coil box is an equipment that winds a hot bar rolled at reduction unit into a coil without mandrel. In the coiling process, the roll gap of the bending unit is a significant one of several factors that influence bar coiling. To obtain a good bar-coil, the roll gap must be set appropriately according to the bar thickness. In this study, with 2-dimensional isothermal elastic-plastic finite element method, authors investigated influence of the change of the roll gap on the initial coiling shapes and the formed inner diameters of coils. Based on finite element analysis, authors proposed the appropriate roll gap according to the bar thickness to be able to wind a hot bar. The inner diameters of coils by results of analysis comparatively agreed with coling operation conducted in plant.