• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1191-1198
• /
• 2018

The wind profiler radar provides a standing profile of the wind vector and the atmospheric physical signal for the fixed point. Since the wind vector is calculated by the manufacturer's data processing program, the quality control of the date is limited. Therefore, understanding and exploiting the raw spectrum data need to improve the quality of the wind vector. The raw data of the wind vector is the power spectral density stored in binary form. In this study, an algorithm was completed to transform the raw data into the real spectral density, and the use of raw data was evaluated by retrieving zero-order and first-order moments of the spectral based on the spectrum quality control.

• Wind and Structures
• /
• v.9 no.5
• /
• pp.387-396
• /
• 2006

This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to compare with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.184.1-184.1
• /
• 2010

In order to research the way to evaluate wind resource without actual Met Mast data, this paper has been carried out on the southeastern region of Jeju island, Korea. Although wind turbine has been an economical alternative energy resource, misjudging the prediction of lifetime or payback period occurs because of the inaccurate assessment of wind resource and the location of wind turbine. Using WindPRO(Ver. 2.7), a software for wind farm design developed by EMD from Denmark, wind resources for the southeastern region of Jeju island was analyzed, and the performance of WindPRO prediction was evaluated in detail. Met Mast data in Su-san 5.5Km far from Samdal wind farm, AWS in Sung-san 4.5km far from Samdal wind farm, and Korea Wind Map data had been collected for this work.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.885-897
• /
• 2009

In order to make sure the impact of spatial resolution of wind energy map on the estimation of wind power density in the Korean Peninsula, the comparison studies on the characteristics of wind energy map with three different spatial resolutions were carried out. Numerical model used in the establishment of wind map is MM5 (5th generation Mesoscale Model) with RBAPS (Regional Data Assimilation and Prediction System) as initial and boundary data. Analyzed Period are four months (March, August, October, and December), which are representative of four seasons. Since high spatial resolution of wind map make the undulation of topography be clear, wind pattern in high resolution wind map is correspond well with topography pattern and maximum value of wind speed is also increase. Indication of island and mountains in wind energy map depends on the its spatial resolution, so wind patterns in Heuksan island and Jiri mountains are clearly different in high and low resolutions. And area averaged power density can be changed by estimation method of wind speed for unit area in the numerical model and by treatment of air density. Therefore the studiable resolution for the topography should be evaluated and set before the estimation of wind resources in the Korean Peninsula.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.271-277
• /
• 1998

1. Why Wind Power\ulcorner Advantages of Wind Energy : free cost, non-pollutant, free waste large unit is possible Disadvantages : intermittent of energy density limited sites Unit Capacity of various Power Plant Solar PP : 10 - 500㎾ Wind PP : 200 - 2000 ㎾ Nuclear PP 700 - 1000 MW Installation Cost of Power Plants Nuclear PP : $ 2,500/㎾ Solar PP : $ 6,000/㎾ Wind PP : $ 1.000 /kw.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.1
• /
• pp.19-24
• /
• 2010

At the altitudes above 3km, the wind is three to four time faster and less variable than at the current MW sized wind turbine hub height of around 100m. In addition, power generation from wind turbines installed on the ground is intermittent because local wind conditions are affected by local topography and artificial structures. The wind energy researchers and engineers are now looking for revolutionary ideas to utilize high altitude wind resources in-creasing the capabilities of wind turbine installations. This article presents and discusses several concepts for wind energy exploitation from wind at high altitudes. The concepts presented in this paper make use of lifting bodies, called wings or kites, connected to a tether that stetches into the higher regions of the atmosphere.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.81-84
• /
• 2008

This paper discussed the validity of wind force power generation in consideration of the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind velocity, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was higher at wind power plants installed in southwestern coastal areas where wind velocity was low than at those installed in mountain areas in Gangwondo where wind velocity was high. This suggests that the shape parameter of wind distribution is low due to the characteristics of mountain areas. and the standard deviation of wind velocity is large due to the effect of mountain winds, and therefore, actual generation is low in mountain areas although wind velocity is high.

• Solar Energy
• /
• v.5 no.2
• /
• pp.3-10
• /
• 1985

This paper is concerned with the characterized method of wind speed distribution for calculation of wind power density of regional group and wind potential in Korea. It is shown that the Rayleigh distribution, K = 2, is not suitable for analyzing wind data in Korea. Simple relationship, K = 0.21 V + 0.84, is derived from Weibull wind distribution by analyzing wind data obtained from 24 meteorological station and is a suitable tool for estimation of wind power density. Application of this result, the domestic ideal and actual wind potential are estimated as $3.16{\times}10^9$ KWH/year and $7.14{\times}$10^8 KWH/year respectively for the case of 10 meter height, $1m^2$ swept area and $0.1{\times}0.1Km^2$ land area. And for the case of 50 meter height, ideal and actual wind potential are increased as $7.56{\times}10^9$ KWH/year and $2.37{\times}10^9$ KWH/year respectively.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.36-42
• /
• 2011

The wind speed at the altitude around 300 m is much higher and less variable than at the altitude around 80 m which is the same height of the MW class tower turbine's hub height. The wind power density is increased 0.37 W/$m^2$ per meter at the altitude around 6 to 7 km and 0.25 W/$m^2$ per meter at the altitude around 80 to 500 m. There are two types of power generation systems using lifting bodies. The one is that The generator is installed in the ground station and stretched into the lifting body through the tether. The other is that the generator is installed in the lifting body and stretched into the ground station through the tether. Many kinds of lifting bodies are also researched in the world, called kites, wings, single or twin aerostat, and so on. This article introduced the technical development status and the market prospects of the high altitude wind power generation system all over the world in detail.

• Wind and Structures
• /
• v.31 no.5
• /
• pp.419-430
• /
• 2020

Weibull distribution is a conspicuous distribution known for its accuracy and its usage for wind energy analysis. The two and three parameter Weibull distributions are adopted in this study to fit wind speed data. The daily mean wind speed data of Ennore, Tamil Nadu, India has been used to validate the procedure. The parameters are estimated using maximum likelihood method, least square method and moment method. Four statistical tests namely Root mean square error, R2 test, Kolmogorov-Smirnov test and Anderson-Darling test are employed to inspect the fitness of Weibull probability density functions. The value of shape factor, scale factor, wind speed and wind power are determined at a height of 100m using extrapolation of numerical equations. Also, the value of capacity factor is calculated mathematically. This study provides a way to evaluate feasible locations for wind energy assessment, which can be used at any windy site throughout the world.