• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1532-1539
• /
• 2017

The floating photovoltaic system is a new concept in the renewable energy technology. That is similar to land based photovoltaic technology except floating system. So the system needs buoyant objects, mooring, ect, besides modules and supports, and that is able to withstand in water level changes and wind strength. Therefore the floating photovoltaic system is much different from land photovoltaic system. K-water (Korea Water Resources Corporation) has been operating two floating photovoltaic system that's capacity is 100 kW and 500 kW respectively since in summer 2011 for commercial generation, and have construction project for 2,000 kW in Boryeong multipurpose Dam and other areas. Furthermore K-water was developing a tracking-type floating photovoltaic system at Daecheong multipurpose Dam and developed and installed an ocean floating photovoltaic demonstration plant at Sihwa Lake in October 2013 for R&D. In this paper, we introduce that structure of floating photovoltaic system include buoyant structure, mooring system and auxiliary device. Especially the rope which is in part of mooring should be always maintain tension under any water level. Also we explain about structure design concept to wind load in an every loading condition and a kind of structure materials and PV structure types used in water environment. Especially ocean floating PV system is affected by tidal current and typhoon. So there are considering the elements in design. Finally we compare with floating and land photovoltaic on power amount. As a result of that we verified the floating photovoltaic system is more about 6.6~14.2 % efficiency than a general land photovoltaic system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.3
• /
• pp.245-259
• /
• 1994

This paper is concerned with the development of a three-dimensional numerical model for coastal circulation and heat transport with improved prediction ability. The model uses fully nonlinear, time-dependent three-dimensional, $\sigma$-transformed equations of motion and equation of heat transport The model was verified with experimental data for wind-driven current in a one-dimensional channel and thermal jets flowing into stagnant waters and applied for unsteady flow induced by tide and thermal jets in coastal waters around Kori nuclear power plant. The model results were in good agreements with experimental data sets for wind-driven current and thermal jet, and field observed data sets in coastal waters. This study has shown that the $\kappa$-$\varepsilon$ turbulence model is applicable to various coastal conditions without any modification of turbulence constants.

• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.13-20
• /
• 2007

Fauna of Shinpo nuclear powerplant site were surveyed during Feb 27-Mar 4, 2003 as a part of ecological environmental survey. This area is well dominated by coniferous trees (Pinus densiflora) ranging 15-50 years. In the shoreline black pine (Pinus thungergii) is the dominant species and was planted for wind protection. Around Shinpo areas inside 50 km in radius was found 33 mammal species (3 orders, 15 families), and amphibian-reptiles 6 species (2 orders, 3 families) were recorded. Natural monument in the areas were estimated 6 species of mammals and one species of reptiles. Although the habitat of Shinpo area is deteriorated due to deforestation, illegal hunting, etc. the fauna seems to be rich in species. Despite the sudden halt of KEDO project the conservation efforts and continuous monitoring are required considering a continuation of the project.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.601-611
• /
• 2017

This paper proposes a simultaneous control of frequency deviation and electric vehicles (EVs) battery state of charge (SOC) using load frequency control (LFC) and EV controllers. In order to provide both frequency stabilization and SOC schedule near optimal performance within the whole operating regions, a multiple-input multiple-output model predictive control (MIMO-MPC) is employed for the coordination of LFC and EV controllers. The MIMO-MPC is an effective model-based prediction which calculates future control signals by an optimization of quadratic programming based on the plant model, past manipulate, measured disturbance, and control signals. By optimizing the input and output weights of the MIMO-MPC using particle swarm optimization (PSO), the optimal MIMO-MPC for simultaneous control of the LFC and EVs, is able to stabilize the frequency fluctuation and maintain the desired battery SOC at the certain time, effectively. Simulation study in a two-area interconnected power system with wind farms shows the effectiveness of the proposed MIMO-MPC over the proportional integral (PI) controller and the decentralized vehicle to grid control (DVC) controller.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.13-16
• /
• 2005

본 연구는 발전용 풍력설비의 안정적인 전원공급 및 계통운영에 필요한 기술기준 및 규정을 제정하는 것으로 전기사업법 제67조(기술기준)에 따라 전기설비의 안전관리를 위하여 운영중인 기술기준 중 현재 제정되어 있지 않은 $\ulcorner$발전용 풍력설비기술기준$\lrcorner$과 법정 기술기준을 구체화하여 설비의 설계, 제작, 시공, 운영, 검사 및 보수시에 기술지침으로 활용할 수 있는 $\ulcorner$풍력발전규정$\lrcorner$을 신규로 개발하는 것이다. 현재 기술기준은 전기사업법 제67조(기술기준) 및 동 법 시행령 제43조(기술기준의 제정)에 따라 전기설비기술기준, 발전용 화력설비기술기준, 발전용 수력설비기술기준 및 발전설비 용접기술기준 등 4개가 고시로 운영중이다. 그러나 국내 풍력발전기 설비용량은 약 22MW이고, 다수가 건설중 이거나 계획 중에 있으나 설치허가 및 검사기준이 되어야 할 기술기준이 없는 상황이다. 따라서, 본 연구를 통하여 풍력발전설비에 대한 국내기술의 안정적인 전원공급 및 계통운영에 필요한 기술기준(안) 및 규정(안)등을 실현하였다.

• Journal of Energy Engineering
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2004

Gasification is the essential technology that can meet the interim hydrogen demand of large quantity before entering the hydrogen economy. Although the hydrogen production that is based upon the pure renewable energy like wind and solar power will eventually prevail, the interim mass production of hydrogen for the next ten to twenty years will come from the technologies that can demonstrate the economic feasibility in production cost with a high potential in minimizing CO$_2$ generation and in improving plant efficiency. Particularly, feedstock such as natural gas, coal, petroleum residual oil, wastes, and biomass appears to be utilized in Korea as hydrogen source, at least during the short and medium period of time, owing to the advantage in production cost. Because one of the main reasons behind the recent hydrogen issue is the reduction requirement of CO$_2$ that would be controlled according to the climate change protocol, hydrogen production technologies must be developed to yield the minimal CO$_2$ generation.

• Smart Media Journal
• /
• v.8 no.1
• /
• pp.82-91
• /
• 2019

This study provides the analysis and prediction of fruits diseases related to weather conditions (temperature, wind speed, solar power, rainfall and humidity) using Linear Model and Poisson Regression. The main goal of the research is to control the method of fruits diseases and also to prevent diseases using less agricultural pesticides. So, it is needed to predict the fruits diseases with weather data. Initially, fruit data is used to detect the fruit diseases. If diseases are found, we move to the next process and verify the condition of the fruits including their size. We identify the growth of fruit and evidence of diseases with Linear Model. Then, Poisson Regression used in this study to fit the model of fruits diseases with weather conditions as an input provides the predicted diseases as an output. Finally, the residuals plot, Q-Q plot and other plots help to validate the fitness of Linear Model and provide correlation between the actual and the predicted diseases as a result of the conducted experiment in this study.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.241-255
• /
• 1997

Three dimensional numerical model is used to simulate the circulation patterns in the Gamcheon Bay located in Pusan, Korea and compared with the observed data. The model is forced by winds, tidal elevation at open boundaries, and warm water discharged from the outfall of power plant, Turbulence mixing coefficients are calculated according to a ${\kippa}-{\varepsilon}$ turbulence closure submodel. Temperature, salinty and current are measuted extensively and these measuted data are compared with the simulation results. Eddy-like features exist both in observed data dna simulation results. These eddies are the results of interaction with the weak tidal current, wind driven current and warm water discharges. Compensational deeects are also found to exit such that while surface current is strong, bottom current tends to weaken and vice versa.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.106-114
• /
• 2023

With rising concerns about pesticide spray drift by aerial application, this study attempt to evaluate aerodynamic property and collection efficiency of spray drift according to the leaf area index (LAI) of crop for preventing undesirable pesticide contamination by the spray-drift tunnel experiment. The collection efficiency of the plant with 'Low' LAI was measured at 16.13% at a wind speed of 1 m·s^-1. As the wind speed increased to 2 m·s^-1, the collection efficiency of plant with the same LAI level increased 1.80 times higher to 29.06%. For the 'Medium' level LAI, the collection efficiency was 24.42% and 43.06% at wind speed of 1 m·s^-1 and 2 m·s^-1, respectively. For the 'High' level LAI, it also increased 1.24 times higher as the wind speed increased. The measured results indicated that the collection of spray droplets by leaves were increased with LAI and wind speed. This also implied that dense leaves would have more advantages for preventing the drift of airborne spray droplets. Aerodynamic properties also tended to increase as the LAI increased, and the regression analysis of quadric equation and power law equation showed high explanatory of 0.96-0.99.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.4
• /
• pp.315-323
• /
• 2018

CanSat has being attracted considerable attentions for the use as training purposes owing to its advantage that can implement overall system functions of typical commercial satellites within a small package like a beverage can. So-called P.P.T CanSat (Power Plant Trio Can Satellite), proposed in this study, is the name of a CanSat project which have participated in 2015 domestic CanSat competition. Its main objective is to self-power on a LED and a MEMS sensor module by using electrical energy harvested from solar, wind and piezo energy harvesting systems. This study describes the system design results, payload level function tests, flight test results and lessons learned from the flight tests.