• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.714-721
• /
• 2011

In this paper, developing management programs for EMI tracking can navigate the site quickly and solve EMI tracking cause and location to use materials such as analysis of air accidents, EMI site location data of 1000 RF companys, radio wave spectrum analysis and audio data. these data are databased and used comparable data. Also, EMI has been prevented by establishing continuous monitoring system through a 24-hour surveillance. Therefore we were able to provide high quality air waves in order to prevent aircraft accidents. In addition, radar control staff of Korea Airports Corporation against passenger aircraft that will prevent the worst aircraft accident have been established based to continue periodic aviation frequency protection and Portable Electronic Devices(PED) on board aircraft to prevent the culture of safety campaign.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.41-51
• /
• 2017

Recently, Broadband Internet service in the rural area is deployed actively so it will be needed to identify the factors influencing success for continuous spread. In this paper, we explain the users'satisfaction of BcN for rural area and verify success factors such as obstacles the digital divide through the empirical analysis. We select basic variables from Information System (IS) Success Model and add specific variables from former research about overcoming digital divide. The results show that system quality has a significant influence on satisfaction. Use and satisfaction have an impact on eliminating the digital divide in rural area. Based on the findings, academic and practical implications for establishing Broadband Service in rural area are also discussed.

• Korean small business review
• /
• v.32 no.1
• /
• pp.65-87
• /
• 2010

With the advent of knowledge-based society, the revitalization of technological innovation type SMEs, termed "inno-biz" hereafter, has been globally recognized as a government policymakers' primary concern in strengthening national competitiveness, and much effort is being put into establishing polices of boosting the start-ups and innovation capability of SMEs. Especially, in that the inno-biz enables national economy to get vitalized by widening world markets with its superior technology, and thus, taking the initiative of extremely competitive world markets, its growth and development has greater significance. In the case of Korea, the government has been maintaining the policies since the late 1990s of stimulating the growth of SMEs as well as building various infrastructures to foster the start-ups of the SMEs such as venture businesses with high technology. In addition, since the enactment of "Innovation Promotion Law for SMEs" in 2001, the government has been accelerating the policies of prioritizing the growth and development of inno-biz. So, for the sound growth and development of Korean inno-biz, this paper intends to offer effective management strategies for SMEs and suggest proper policies for the government, by researching into the effect of technological innovation capability and technology commercialization capability as the primary business resources on business performance in Korean SMEs in the light of market information orientation. The research is carried out on Korean companies characterized as inno-biz. On the basis of OSLO manual and prior studies, the research categorizes their status. R&D capability, technology accumulation capability and technological innovation system are categorized into technological innovation capability; product development capability, manufacturing capability and marketing capability into technology commercialization capability; and increase in product competitiveness and merits for new technology and/or product development into business performance. Then the effect of each component on business performance is substantially analyzed. In addition, the mediation effect of technological innovation and technology commercialization capability on business performance is observed by the use of the market information orientation as a parameter. The following hypotheses are proposed. H1 : Technology innovation capability will positively influence business performance. H1-1 : R&D capability will positively influence product competitiveness. H1-2 : R&D capability will positively influence merits for new technology and/or product development into business performance. H1-3 : Technology accumulation capability will positively influence product competitiveness. H1-4 : Technology accumulation capability will positively influence merits for new technology and/or product development into business performance. H1-5 : Technological innovation system will positively influence product competitiveness. H1-6 : Technological innovation system will positively influence merits for new technology and/or product development into business performance. H2 : Technology commercializing capability will positively influence business performance. H2-1 : Product development capability will positively influence product competitiveness. H2-2 : Product development capability will positively influence merits for new technology and/or product development into business performance. H2-3 : Manufacturing capability will positively influence product competitiveness. H2-4 : Manufacturing capability will positively influence merits for new technology and/or product development into business performance. H2-5 : Marketing capability will positively influence product competitiveness. H2-6 : Marketing capability will positively influence merits for new technology and/or product development into business performance. H3 : Technology innovation capability will positively influence market information orientation. H3-1 : R&D capability will positively influence information generation. H3-2 : R&D capability will positively influence information diffusion. H3-3 : R&D capability will positively influence information response. H3-4 : Technology accumulation capability will positively influence information generation. H3-5 : Technology accumulation capability will positively influence information diffusion. H3-6 : Technology accumulation capability will positively influence information response. H3-7 : Technological innovation system will positively influence information generation. H3-8 : Technological innovation system will positively influence information diffusion. H3-9 : Technological innovation system will positively influence information response. H4 : Technology commercialization capability will positively influence market information orientation. H4-1 : Product development capability will positively influence information generation. H4-2 : Product development capability will positively influence information diffusion. H4-3 : Product development capability will positively influence information response. H4-4 : Manufacturing capability will positively influence information generation. H4-5 : Manufacturing capability will positively influence information diffusion. H4-6 : Manufacturing capability will positively influence information response. H4-7 : Marketing capability will positively influence information generation. H4-8 : Marketing capability will positively influence information diffusion. H4-9 : Marketing capability will positively influence information response. H5 : Market information orientation will positively influence business performance. H5-1 : Information generation will positively influence product competitiveness. H5-2 : Information generation will positively influence merits for new technology and/or product development into business performance. H5-3 : Information diffusion will positively influence product competitiveness. H5-4 : Information diffusion will positively influence merits for new technology and/or product development into business performance. H5-5 : Information response will positively influence product competitiveness. H5-6 : Information response will positively influence merits for new technology and/or product development into business performance. H6 : Market information orientation will mediate the relationship between technology innovation capability and business performance. H7 : Market information orientation will mediate the relationship between technology commercializing capability and business performance. The followings are the research results : First, as for the effect of technological innovation on business performance, the technology accumulation capability and technological innovating system have a positive effect on increase in product competitiveness and merits for new technology and/or product development, while R&D capability has little effect on business performance. Second, as for the effect of technology commercialization capability on business performance, the effect of manufacturing capability is relatively greater than that of merits for new technology and/or product development. Third, the mediation effect of market information orientation is identified to exist partially in information generation, information diffusion and information response. Judging from these results, the following analysis can be made : On Increase in product competitiveness, directly related to successful technology commercialization of technology, management capability including technological innovation system, manufacturing capability and marketing capability has a relatively strong effect. On merits for new technology and/or product development, on the other hand, capability in technological aspect including R&D capability, technology accumulation capability and product development capability has relatively strong effect. Besides, in the cast of market information orientation, the level of information diffusion within an organization plays and important role in new technology and/or product development. Also, for commercial success like increase in product competitiveness, the level of information response is primarily required. Accordingly, the following policies are suggested : First, as the effect of technological innovation capability and technology commercialization capability on business performance differs among SMEs; in order for SMEs to secure competitiveness, the government has to establish microscopic policies for SMEs which meet their needs and characteristics. Especially, the SMEs lacking in capital and labor are required to map out management strategies of focusing their resources primarily on their strengths. And the government needs to set up policies for SMEs, not from its macro-scaled standpoint, but from the selective and concentrative one that meets the needs and characteristics of respective SMEs. Second, systematic infrastructures are urgently required which lead technological success to commercial success. Namely, as technological merits at respective SME levels do not always guarantee commercial success, the government should make and effort to build systematic infrastructures including encouragement of M&A or technology trade, systematic support for protecting intellectual property, furtherance of business incubating and industrial clusters for strengthening academic-industrial network, and revitalization of technology financing, in order to make successful commercialization from technological success. Finally, the effort to innovate technology, R&D, for example, is essential to future national competitiveness, but its result is often prolonged. So the government needs continuous concern and funding for basic science, in order to maximize technological innovation capability. Indeed the government needs to examine continuously whether technological innovation capability or technological success leads satisfactorily to commercial success in market economic system. It is because, when the transition fails, it should be left to the government.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.94-102
• /
• 2007

Today, packet services for wireless internet is provided by WiBro WLAN 3G, but it is hard to be satisfied seamless connection in each of networks and wide-area service will increase the number of BS(base station) because WiBro and WLAN has been coverage smaller than 3G. that is, communicate which can use continuous and seamless data service is available when user is moving. Therefore, service provider need to integrate network for reducing management expenses. In this paper, we propose advanced handoff algorithm which is considered by 'user demand bandwidth', 'MN(Mobile Node) movement speed' and 'MN service area' and show that simulating result is superior to 'bandwidth allocation', 'QoS(Quality of Service) rate' and 'handoff failure rate'

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.203-212
• /
• 2017

This research analyzed the factors that have the influences on the intentions to use the consumer dispute settlement system for the small- and medium-sized corporations. The consumer dispute settlement system is a general Internet information portal service which enables the small- and medium-sized corporations and the small businesses receive the support for the accurate damage handling method and the legal service through the Internet in their disputes with the black consumers or the consumers. With the small- and medium-sized corporation users who use the consumer dispute settlement system as the subjects, the research took a lot at what influences the consumer dispute settlement system has on the quality of the information, the quality of the system, the ease-of-use regarding which the environmental factors are perceived, and the ease that was perceived and, finally, what influences it has on the intention of the use. The accuracy, the convenience, and the costs of the consumer dispute settlement system had the positive influences on the ease-of-use that was perceived and the accuracy and the convenience, also had the positive influences on the usefulness that was perceived. Also, it was verified that the ease-of-use of the consumer dispute settlement system that was perceived and the usefulness of use of the consumer dispute settlement system that was perceived finally had the positive influence relationships with the intention of the use. It is highly expected that if, based on the results of this research, the quality of the consumer dispute settlement system is maintained and supplemented to fit the priority order, there will be the maintenance of, and the development toward, a system that is even more improved than the previously existent system.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.169-197
• /
• 2018

The purpose of this study is to present a reasonable and concrete standard for the Korean aviation insurance compulsory subscription system. Through this, we aim to improve the current revision of laws and regulations, and ultimately create an environment in which the safety and property of the Korean people who use aircraft with appropriate aviation insurance can be secured. In particular, by reviewing the aviation business law and its new laws and regulations enacted in 2017, the legislative improvement direction of aviation insurance will be proposed. In order to maintain the continuous growth of the air transportation industry and to make amicable compensation for the victims, considering the characteristics of the total accident, instantness, and giganticness of air accidents in which a lot of people and property are lost in the event of an accident, adequate insurance coverage is essential. In this respect, the compulsory insurance to amend the principle of freedom of contract, which is the great principle of the modern judicial system, will be persuasive. However, in comparison with foreign legislation, the legal provisions on Korea's obligation to comply with aviation insurance need to be revised around the following issues: First, it is reasonable to enforce the regulation of the mandatory aviation insurance by legislation from the Congress not by administrative regulations. Because it will force the monetary obligations of the individual such as common air carriers. Second, our law regulations respond to various kinds of air damages by using the phrase "limit of liability stipulated in international conventions". However, as we have seen in the text, the range of compensation are various according to the use of legal instruments in international conventions such as the Montreal Convention, which governs the compensation of passengers for damages to passengers today. Third, in countries with narrow territories, such as Korea, there are big differences in flying time and insurable risk between domestic and international transportation. Therefore, it is necessary to divide domestic transportation and international transportation even in the obligation to join the insurance. This dual discipline has the advantage for rookies in air carrier market who mainly start their business from domestic service. Fourth, according to Korean law, the regulations of automobile loss insurance is applicable to the aviation mandatory insurance of unmanned aerial vehicle accident which is lack of persuasion. In the future, it will be appropriate to discipline insurance for unmanned aerial vehicles with unlimited potential for development from a long-term perspective.

• Journal of Distribution Science
• /
• v.8 no.3
• /
• pp.37-47
• /
• 2010

CRM refers to the operating activities that always maintain and promote good relationship with customers to ultimately maximize the company's profits by understanding the value of customers to meet their demands, establishing a strategy which may maximize the Life Time Value and successfully operating the business by integrating the customer management processes. In our country, many big businesses are introducing CRM initiatively to use it in marketing strategy however, most medium and small sized companies do not understand CRM clearly or they feel difficult to introduce it due to huge investment needed. This study is intended to present CRM promotion strategy and activities plan fit for the medium and small sized companies by analyzing the success factors of the leading companies those have already executed CRM by surveying the precedents to make the distributors out of the industries have close relation with consumers to overcome their weakness in scale and strengthen their competitiveness in such a rapidly changing and fiercely competing market. There are 5 stages to build CRM such as the recognition of the needs of CRM establishment, the establishment of CRM integrated database, the establishment of customer analysis and marketing strategy through data mining, the practical use of customer analysis through data mining and the implementation of response analysis and close loop process. Through the case study of leading companies, CRM is needed in types of businesses where the companies constantly contact their customers. To meet their needs, they assertively analyze their customer information. Through this, they develop their own CRM programs personalized for their customers to provide high quality service products. For customers helping them make profits, the VIP marketing strategy is conducted to keep the customers from breaking their relationships with the companies. Through continuous management, CRM should be executed. In other words, through customer segmentation, the profitability for the customers should be maximized. The maximization of the profitability for the customers is the key to CRM. These are the success factors of the CRM of the distributors in Korea. Firstly, the top management's will power for CS management is needed. Secondly, the culture across the company should be made to respect the customers. Thirdly, specialized customer management and CRM workers should be trained. Fourthly, CRM behaviors should be developed for the whole staff members. Fifthly, CRM should be carried out through systematic cooperation between related departments. To make use of the case study for CRM, the company should understand the customer and establish customer management programs to set the optimal CRM strategy and continuously pursue it according to a long-term plan. For this, according to collected information and customer data, customers should be segmented and the responsive customer system should be designed according to the differentiated strategy according to the class of the customers. In terms of the future CRM, integrated CRM is essential where the customer information gathers together in one place. As the degree of customers' expectation increases a lot, the effective way to meet the customers' expectation should be pursued. As the IT technology improved rapidly, RFID (Radio Frequency Identification) appears. On a real-time basis, information about products and customers is obtained massively in a very short time. A strategy for successful CRM promotion should be improving the organizations in charge of contacting customers, re-planning the customer management processes and establishing the integrated system with the marketing strategy to keep good relation with the customers according to a long-term plan and a proper method suitable to the market conditions and run a company-wide program. In addition, a CRM program should be continuously improved and complemented to meet the company's characteristics. Especially, a strategy for successful CRM for the medium and small sized distributors should be as follows. First, they should change their existing recognition in CRM and keep in-depth care for the customers. Second, they should benchmark the techniques of CRM from the leading companies and find out success points to use. Third, they should seek some methods best suited for their particular conditions by achieving the ideas combining their own strong points with marketing. Fourth, a CRM model should be developed that will promote relationship with individual customers just like the precedents of small sized businesses in Switzerland through small but noticeable events.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.25-25
• /
• 2022

Drought becomes frequent and severe because of continuous global warming, leading to a significant loss of crop yield. In soybean (Glycine max [L.]), most of quantitative trait loci (QTLs) analyses for drought tolerance have conducted by investigating yield changes under water-restricted conditions at the reproductive stages. More recently, the necessity of QTL studies to use physiological indices responding to drought at the early growth stages besides the reproductive ones has arisen due to the unpredictable and prevalent occurrence of drought throughout the soybean growing season. In this study, we thus identified QTLs conferring wilting scores and moisture contents of soybean subjected to drought stress in the early vegetative stage using an recombinant inbred line (RIL) population derived from a cross between Taekwang (drought-sensitive) and SS2-2 (drought-tolerant). For the two traits, the same major QTL was located on chromosome 10, accounting for up to 11.5% of phenotypic variance explained with LOD score of 12.5. This QTL overlaps with a reported QTL for the limited transpiration trait in soybean and harbors an ortholog of the Arabidopsis ABA and drought-induced RING-D UF1117 gene. Meanwhile, one of important features of plant drought tolerance is their ability to limit transpiration rates under high vapor pressure deficiency in response to mitigate water loss. However, monitoring their transpiration rates is time-consuming and laborious. Therefore, only a few population-level studies regarding transpiration rates under the drought condition have been reported so far. Via employing an Arduino-based platform, for the reasons addressed, we are measuring and recording total pot weights of soybean plants every hour from the 1^st day after water restriction to the days when the half of the RILs exhibited permanent tissue damage in at least one trifoliate. Gradual decrease in moisture of soil in pots as time passes refers increase in the severity of drought stress. By tracking changes in the total pot weights of soybean plants, we will infer transpiration rates of the mapping parents and their RILs according to different levels of VPD and drought stress. The profile of transpiration rates from different levels of severity in the stresses facilitates a better understanding of relationship between transpiration-related features, such as limited maximum transpiration rates, to water saving performances, as well as those to other drought-responsive phenotypes. Our findings will provide primary insights on drought tolerance mechanisms in soybean and useful resources for improvement of soybean varieties tolerant to drought stress.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2006.11a
• /
• pp.65-74
• /
• 2006

Modem drug discovery requires rapid pharmacokinetic evaluation of chemically diverse compounds for early candidate selection. This demands the development of analytical methods that offer high-throughput of samples. Naturally, liquid chromatography / tandem mass spectrometry (LC-MS/MS) is choice of the analytical method because of its superior sensitivity and selectivity. As a result of the short analysis time(typically 3-5min) by LC-MS/MS, sample preparation has become the rate- determining step in the whole analytical cycle. Consequently tremendous efforts are being made to speed up and automate this step. In a typical automated 96-well SPE(solid-phase extraction) procedure, plasma samples are transferred to the 96-well SPE plate, internal standard and aqueous buffer solutions are added and then vacuum is applied using the robotic liquid handling system. It takes only 20-90 min to process 96 samples by automated SPE and the analyst is physically occupied for only approximately 10 min. Recently, the ultra-high flow rate liquid chromatography (turbulent-flow chromatography)has sparked a huge interest for rapid and direct quantitation of drugs in plasma. There is no sample preparation except for sample aliquotting, internal standard addition and centrifugation. This type of analysis is achieved by using a small diameter column with a large particle size(30-5O ${\mu}$m) and a high flow rate, typically between 3-5 ml/min. Silica-based monolithic HPLC columns contain a novel chromatographic support in which the traditional particulate packing has been replaced with a single, continuous network (monolith) of pcrous silica. The main advantage of such a network is decreased backpressure due to macropores (2 ${\mu}$m) throughout the network. This allows high flow rates, and hence fast analyses that are unattainable with traditional particulate columns. The reduction of particle diameter in HPLC results in increased column efficiency. use of small particles (<2 urn), however, requires p.essu.es beyond the traditional 6,000 psi of conventional pumping devices. Instrumental development in recent years has resulted in pumping devices capable of handling the requirements of columns packed with small particles. The staggered parallel HPLC system consists of four fully independent binary HPLC pumps, a modified auto sampler, and a series of switching and selector valves all controlled by a single computer program. The system improves sample throughput without sacrificing chromatographic separation or data quality. Sample throughput can be increased nearly four-fold without requiring significant changes in current analytical procedures. The process of Bioanalytical Method Validation is required by the FDA to assess and verify the performance of a chronlatographic method prior to its application in sample analysis. The validation should address the selectivity, linearity, accuracy, precision and stability of the method. This presentation will provide all overview of the work required to accomplish a full validation and show how a chromatographic method is suitable for toxirokinetic sample analysis. A liquid chromatography/tandem mass spectrometry (LC-MS/MS) method developed to quantitate drug levels in dog plasma will be used as an example of tile process.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.2
• /
• pp.89-100
• /
• 2024

Purpose : The objective of this study was to determine the major factors influencing the onset of diabetes and prediabetes and for collection of the basic data required to reduce the prevalence of diabetes and plan for administration of an effective health care system. By classifying the level of blood sugar management according to three categories: normal, prediabetes, and diabetes diagnosis, and determining the causes of diabetes in consideration of various variables, we will conduct an analysis of the main factors to be addressed for effective management of blood sugar and for preparation of basic data for use in early management. Methods : In this study, an analysis of raw data from the 8th National Health and Nutrition Examination Survey collected over a period of three years from 2019 to 2021, including 8,110 subjects in 2019, 7,359 subjects in 2020, and 7,090 subjects in 2021 was performed. A total of 22,559 subjects were aged 19 years or older, and 15,821 subjects were classified as subjects for inclusion in the final analysis. In the analysis, categorical variables were tested for difference, analysis of continuous variables using regression was performed, and analysis of influencing factors was performed using multinomial logistic analysis. Result : Significant factors related to the onset of diabetes and prediabetes included age (p<.001), marital status (p<.001), occupation (p<.001), hypertension (p<.001), dyslipidemia (p<.001), cardiovascular disease (p=.008), alcohol (p=.030) smoking (p=.005), systolic blood pressure (p<.001), diastolic blood pressure (p<.001), body mass index (p<.001) and waist circumference (p=.037), blood triglycerides (p<.001), and blood cholesterol (p<.001). Conclusion : Diabetes, a complex disease affected by a variety of diseases, requires active management from the prediabetes stage, and providing an appropriate level of medical information and services to elderly individuals without family support is considered a long-term health care system requirement in Korean society where the demographic structure is changing. In particular, determining the causes of prediabetes and development of a preventive approach to administering the health care system will be important for efficient management of diabetic patients.